Sunco EXIT LED SIGN Manuale utente

The Brighter Choice

EXIT LED SIGN

Install Guide and Manual

CEILING MOUNT

IMPORTANT

10.

The battery in this unit may not be fully charged. After electricity

is connected to the unit, let the battery charge for at least 24

hours before performing any tests. To test, process “TEST” button

and sign should illuminate. Only use LED specified for the fixture

when re-lamping.

EQUIPMENT: Flat head Philips screwdriver, drill recommended.

Disconnect AC power, make sure the battery is

unplugged before servicing

•If you are replacing an existing halogen fixture,

allow the fixture to cool away from flammable

materials.

Unsnap canopy hole cover on the top of fixture

Connect leads to AC input leads in the Junction Box.

Black wire for 120V, Red/Orange wire for 277V

•Cap off unused wires

•Feed excess wire into a junction box

Connect the battery (see figure)

Unsnap faceplate to open (see figure)

•For dual-sided EXIT sign, remove backplate

and replace with extra faceplate (included)

Feed lead wires through a hole on the top of the

fixture, ensure wires are secured into wire guides

Attach canopy to j-box using bracket and screws

(included), wires will go through the center hole in

the canopy

•Snap housing to canopy

Snap-in arrows on EXIT faceplate as required

Secure faceplate to housing

Test after 24 hours of charging

Turn Power OFF

Canopy

Battery

Connector Socket Button

CEILING

MOUNT

DIAGRAM

Junction

Box

Bracket

Canopy

Diffuser

Snap-in

Directional Arrow

Exit Panel

Plastic

Housing

Screws

Wire Nuts

The Brighter Choice

WARNING SPECIFICATIONS

WALL MOUNT DIAGRAM

Charging time

The AC voltage

340.62 lm

6500 ± 500k

360°

90min

24h

120 - 277V

Color temperature

Swiveling flood lights

Backup battery

Luminous flux

When using electrical equipment, basic safety precautions should

always be followed. Consult local building codes for approved

wiring and installation.

•Do not use outdoors

•Do not mount near gas or electric heaters

• Cap unused wires with wire nuts

• Use caution when servicing batteries

• Equipment should be mounted securely in locations and at

heights where it will not be readily subjected to tampering by

unauthorized personnel.

WALL MOUNT

10.

Disconnect AC power, make sure the battery is

unplugged before servicing

•If you are replacing an existing halogen fixture,

allowing the fixture to cool away from flammable

materials.

Drill holes for knockouts on the backplate that

correspond to junction box holes

Connect leads to AC input leads in the Junction Box.

Black wire for 120V, Red/Orange wire for 277V

•Cap off unused wires

•Feed excess wire into a junction box

Connect the battery (see figure)

•Snap housing on to the backplate

(first top then bottom)

Unsnap faceplate to open (see figure)

Feed lead wires through a hole in the center of

the backplate, ensure wires are secured into

wire guides

Fasten backplate to the junction box

•Snap housing to canopy

Snap-in arrows on EXIT faceplate as required

Secure faceplate to housing

Test after 24 hours of charging

Button

EXIT LED SIGN

Install Guide and Manual Diffuser

Wire

Nuts

Snap-in

Directional Arrow

Exit Panel

Plastic

Housing Back Plate

Turn Power OFF

Battery

Connector Socket

Altri manuali Sunco Apparecchio di illuminazione

Sunco

Sunco PN SM2x2-40W-0K-1PK Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente