Suncoast F2p Manuale utente

CUSTOM AMPLIFICATION
F2p TUBE PREAMP
OWNERS MANUAL
Copyright 2015, Sluggo Music Technology LLC
All Rights Reserved.

Sluggo Music Limited Warranty
Sluggo Music Technology LLC warrants this product to be free of defects in material and
workmanship for the period of one year from the date of original purchase. This
warranty is only applicable to the original retail purchaser. To be protected by this
warranty, the purchaser must complete the online warranty form within 14 days of the
date of purchase. During the warranty period Sluggo Music shall, at its sole discretion,
either repair or replace, free of charge, any product that it deems to be defective upon
inspection by Sluggo Music Technology LLC or its authorized service representative.
To obtain warranty service, the purchaser must first obtain a Return Authorization
Number from our service department and shipping address where to return the unit for
service. All authorized returns must be sent to our service department postage prepaid,
insured for full replacement value, properly packaged and accompanied with a
description of the problem. Sluggo Music reserves the right to update any unit returned
for repair and the right to change or improve the design of the product at any time
without prior notice. This warranty does not cover claims for damage due to abuse,
neglect, alteration or attempted repair by unauthorized personnel, and is limited to
failures arising during normal use that are due to defects in material or workmanship in
the product only. Any warranties, including implied warranties of merchantability and
fitness for a particular purpose, are limited in duration to the length of this original
warranty. In no event will Sluggo Music Technology LLC be liable for incidental or
consequential damages resulting from the breach of any express or implied warranty
including damage to property, damage based on inconvenience or loss of use of the
product, and personal injury to the extent permitted by law. This warranty gives you
specific legal rights, which may vary from state to state. This warranty applies only to
products sold in the United States of America. For warranty information in all other
countries please refer to your local distributor.
Sluggo Music Technology LLC
P.O. Box 913
Dunedin, FL 34697-0913
(727) 247-2520
“SUNCOAST” is a trademark of
Sluggo Music Technology LLC, Copyright 2015
All Rights Reserved

1Overview
1.1 Introduction
1.2 Features
2Controls
2.1 Front Panel Layout
2.2 Preamp Controls
2.3 Rear Panel Layout
2.4 Rear Panel Jack Description
3Operation
3.1 External Effects Patching
3.2 Preamp Tone Settings
3.3 Specifications
3.4 Operating Instructions

1.1 Introduction
Thank you for purchasing the SUNCOAST – F2p Tube Preamp. It is our
commitment to providing our customers with the highest quality, musical
instrument preamp/processors, designed and built in the USA. Utilizing our
vast experience with classic designs over the past 30 years, we set out to
recreate that unique sound from some of our personal favorite artists.
1.2 Features
The following is a summary of your F2p Tube Preamp’s unique features:
•The Ultimate Tube Preamp in a pedal. Works great with Guitar, Bass,
Synthesizers, Etc.
•The Classic Dual Tube preamp design features a Normal (Green
Channel) and a Bright (Red Channel).
•Normal Channel – Volume, Treble and Bass controls with Deep switch.
•Bright Channel – Volume, Treble, Middle and Bass controls with Bright
switch.
•Combine mode footswitch for parallel preamp operation.
•Buffered Master Volume with True Bypass footswitch.
•Buffered effects loop allows for patching of external FX.
•100% Classic Tube Preamp design utilizing precision component
technology.
•Ultra quiet 280KHz switching DC power supply for +/-12V internal
operation, High Voltage +220VDC Switching Power Supply for True
Vacuum Tube Plate Voltage.
•Solid, Diecast Aluminum Enclosure, Durable Black Satin Powder
Coating - Dimensions 4.7 x 7.4 x 1.3"

2.1 Front Panel Layout
2.2 Preamp Controls
Bright Channel (Red)
Volume - The Volume control adjusts the output level of the preamp.
Treble - This tone control adjusts the amount of high frequencies.
Middle - This tone control adjusts the amount of midrange frequencies.
Bass - This tone control adjusts the amount of low frequencies.
Bright - This pushbutton switch adds Brightness.
Normal Channel (Green)
Volume - The Volume control adjusts the output level of the preamp.
Treble - This tone control adjusts the amount of high frequencies.
Bass - This tone control adjusts the amount of low frequencies.
Deep - This pushbutton switch adds Deep Lows.
Combine Footswitch – Combines preamp channels in parallel mode.
Select Footswitch – Selects Preamp Channel Normal (Green)/ Bright (Red).
Bypass Footswitch – Turns the Preamp On/Off.

2.3 Rear Panel Layout
2.4 Rear Panel Jack Description
Power Input - Power input jack, 9VDC @ 600mA (Center–Negative).
Input - Main instrument input jack.
Output - Main preamp output jack.
Master Vol - Master Volume Control.
Send - Effects Loop Send jack, (preamp out).
Return - Effects Loop Return jack, (limiter in).
3.1 External Effects Patching
Instrument
|
F2p Tube Preamp (Input)
F2p Tube Preamp (Send)
|
Effects
|
F2p Tube Preamp (Return)
F2p Tube Preamp (Output)
|
Power Amplifier
|
Speaker

3.2 Preamp Tone Settings
These settings are merely a suggested starting point from which you can set
to your own personal taste.
Volume – 5 (adjust for desired loudness)
Treble – 7
Middle – 3
Bass – 5
Volume – 5 (adjust for desired loudness)
Treble – 7
Bass – 5
3.3 Specifications
Input Voltage – 9VDC
Current Consumption – 450mA
Input Impedance – 1Meg Ohm
Output Impedance – 600 Ohms
Dimensions – 7.4”W x 4.7”H x 1.3”D
Weight – 1.1lbs
3.4 Operating Instructions
•Always connect your instrument input and preamp output prior to turning
the unit or pedal board ON.
•Use only quality coaxial instrument cable (guitar cord) patching your
preamp to your amplifier.
•Always connect the unit a proper power source and use a grounded outlet
strip, otherwise a shock hazard may result, especially when the unit is
connected to other equipment. Domestic 9VDC power adapters should be
connected to 115VAC, 60 Hz. Connection to improper line voltage may
cause permanent damage.
•Do not expose this unit to rain or excessive moisture. This may cause a
shock hazard or damage to the unit.

SAFETY NOTICE: There are no user serviceable parts inside the unit.
Refer servicing to qualified personnel only.
This unit contains EXTREMELY HIGH VOLTAGES. DO NOT
OPERATE THIS UNIT WITH THE BOTTOM COVER REMOVED.
SERIOUS RISK OF SHOCK MAY RESULT!
TUBE PLATE VOLTAGE - 220VDC!
Sluggo Music Technology LLC, Copyright 2015
All Rights Reserved
Indice
Altri manuali Suncoast Amplificatore

























