Sunfire TGM-100 Server Manuale utente

Theater Grand

Media Player

TGM-100 Server

TGM-100C Client

Installation Manual

1. Read Instructions

2. Keep these Instructions

3. Heed all Warnings.

4. Follow all Instructions

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including ampli-

ﬁers) that produce heat.

8. Unplug this apparatus during lightning storms or when

unused for long periods of time.

9. Refer all servicing to qualiﬁed service personnel. Servic-

ing is required when the apparatus has been damaged in

any way, such as a power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the appa-

ratus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

10. Ventilation — The apparatus should be situated so

that its location or position does not interfere with its proper

ventilation. For example, the apparatus should not be situ-

ated on a bed, sofa, rug, or similar surface that may block

any ventilation openings; or placed in a built-in installation

such as a bookcase, cabinet, or closed equipment rack that

may impede the ﬂow of air through ventilation openings.

11. Power Sources — The apparatus should be connected

to a power supply only of the type described in these op-

eration instructions or as marked on the apparatus.

12. Power Cord Protection — Power-supply cords should

be routed so that they are not likely to be walked upon or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit the apparatus.

13. Non-use Periods—The power cord of the apparatus

should be unplugged from the outlet when unused for a

long period of time.

14. Object and Liquid Entry — Care should be taken so

that objects do not fall into and liquids are not spilled into

the inside of the apparatus.

15. Servicing — The user should not attempt to service

the apparatus beyond those means described in this

operating manual. All other servicing should be referred to

qualiﬁed service personnel.

SAFETY

Important Safety Instructions

Installation Manual

16. To prevent electric shock, do not use this polarized

plug with an extension cord, receptacle or other outlet

unless the blades can be fully inserted to prevent blade

exposure.

Pour préevenir les chocs électriques ne pas utiliser cette

ﬁche polariseé avec un prolongateur, un prise de courant

ou une autre sortie de courant, sauf si les lames peuvent

être insérées à fond sans laisser aucune parIVe à décou-

vert.

17. Grounding or Polarization — Precautions should be

taken so that the grounding or polarization means of the

Component is not defeated.

This apparatus does not exceed the Class A/Class B (which-

ever is applicable) limits for radio noise emissions from digital

apparatus as set out in the radio interference regulations of

the Canadian Department of Communications.

ATTENTION — Le présent appareil numérique n'émet pas

de bruits radioélectriques dépassant las limites applicables

aux appareils numériques de class A/de class B (selon le

cas) prescrites dans le règlement sur le brouillage radioé-

lectrique édicté par les ministere des communications du

Canada.

WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRO- DU-

IRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRE-

SPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL

ELECTRICAL CODE INSTRUCTIONS CONTAINED IN ARTICLE

810–“RADIO AND TELEVISION EQUIPMENT”

GROUND CLAMP

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

ANTENNA

LEAD IN WIRE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

SERVICE

ENTRANCE

EQUIPMENT

GROUND CLAMPS

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

NEC NATIONAL ELECTRICAL CODE.

NOTE TO CATV INSTALLER

This reminder is to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-

lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding

system of the building as close to the point of cable entry as practical.

OUTSIDE ANTENNA GROUNDING

If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide

some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code,

NSI/NFPA 70, provides information with regard to proper grounding of the lead-in wire to an antenna-discharge

unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure above.

SAFETY

Installation Manual

Important Safety Instructions .....................1

Chapter 1: Introduction ...............................4

Pre-Installation Information ........................4

Installing the TGM-100 in a Rack...............5

Front View ..................................................6

Rear View...................................................7

Chapter 2: Connections...............................8

Multi-Room Connections............................8

Audio/Video Connections...........................9

Network Connections ...............................17

Chapter 3: System Conﬁguration.............21

Chapter 4: Application Installation and

Updates....................................34

Chapter 5: Troubleshooting ......................37

Appendix:

Speciﬁcations ...........................................39

Limited Warranty ......................................40

Service Assistance ...................................40

Contents

CHAPTER 1

Read the Safety Instructions care-

fully before connecting and using

your TGM-100.

Chapter 1 is a general introduction

to the features and details of your

TGM-100.

Chapter 2 shows the proper way to

connect and install your TGM-100.

Chapter 3 describes how to conﬁg-

ure the system for proper operation

Chapter 4 describes how to install

third-party software applications

and software updates.

Chapter 5 describes some basic

Troubleshooting procedures.

The Appendix shows some addition-

al information, including Speciﬁca-

tions, the Warranty and service

assistance details

To ﬁnd out more about this and other

Sunﬁre products, please visit our

website: www.sunﬁre.com

Installation Manual

CHAPTER 1

1. Introduction

Unpacking

Your TGM-100 should reach you in perfect condition. If

you do notice any shipping damage, please contact your

Sunﬁre Dealer immediately.

Gently lift out the unit and remove all the packing mate-

rial and accessories. It is important to save all the packing

materials and the box in case your TGM-100 ever needs to

be moved or returned for service.

Make sure that you keep your sales receipt. It is the only

way to establish the duration of your Limited Warranty and

it may come in useful for insurance purposes.

Please take a moment to ﬁll out and mail the Sunﬁre Cus-

tomer Response card. Also read the serial number located

on the rear panel, and record it here:

Serial #:

Purchased from:

Date:

Pre-Installation Information

For detailed safety instructions when installing and operat-

ing the TGM-100, either as Server or Client, please refer to

the User's Guide.

It is essential that you can control the TGM-100 once it is

connected and that you have access to the unit’s TV User

Interface at the same location as the control source. In

some installations, the TGM-100 may be in a different room

from the Digital Video display. Without proper planning of

the TGM-100 conﬁguration during installation, conﬁguration

may be problematic.

There are a number of options available in these circum-

stances. These include:

1. Temporarily connect an HDMI display directly to the

TGM-100’s Digital Video connector using short cables

and conﬁgure the TGM-100 using the remote control.

2. Ensure that the control system is properly conﬁgured

and the TGM-100 is controllable via IR from the room in

which the digital television is located.

DVD Region

DVDs are encoded differently in different parts of the world;

for example, a North American DVD drive can’t read a

European DVD. The drive’s DVD region code is set the ﬁrst

time a DVD is inserted into the disc player. Once the region

has been set, it cannot be changed.

Required Equipment

Make sure that the following equipment is available in order

to complete the installation:

• A Sunﬁre TGM-100 and remote control.

• If installing a TGM-100C Client, you must have a

TGM-100 Server and remote control as well.

• ATGM-HDC or TGM-HD1 external storage device.

• ATV for the TGM-100 Server.

• ATV for any TGM-100C Clients installed in the system.

• A USB keyboard and mouse.

• An Ethernet Local Area Network (LAN).

• CDROM or USB Memory Device with application

installer.

• All required cables and connectors.

Installation Manual

CHAPTER 1

Installing the TGM-100 in a Rack

If the TGM-100 is to be installed in a rack, please see the

diagram below for a guide to correct positioning.

TGM-100 Server

TGM-100 Clients

Uninterruptible

Power Supply

(UPS)

Fan

Amplifiers &

Heat Generating

Devices

Leave space between

TGM-100 and other

components

TGM-HDC

iSCSI Storage

Device

Installation Manual

CHAPTER 1

TGM-100

Front View

134 2

STANDBY BUTTON

Press the Standby button to turn the TGM-100 On; press it

again to turn the unit Off.

DISC PLAYER

CDs and DVDs should be inserted with the label side

facing up.

EJECT BUTTON

Pressing the EJECT button ejects the disc.

IR WINDOW

The front panel IR Window allows remote control information

to be transmitted to the TGM-100.

Installation Manual

CHAPTER 1

TGM-100

Rear View

1 2 3 4 5 6

14 13 1112 98710

HDMI VIDEO

Use the HDMI connector to connect your TGM-100 to a digital

ﬂat-panel television or projector. HDMI Output is usually connect-

ed to the main television used for viewing movies in your home.

To take advantage of the Surround Sound Audio Format, it is

necessary to connect the audio output to a device capable of

decoding the surround sound signal.

• If your digital TV can decode the signal, simply connect it to the

HDMI socket on the back of the TGM-100.

• If your digital TV does not decode the signal, noise will be emit-

ted by the TV’s speakers. In this case you should mute the TV’s

volume and connect an ampliﬁer with this capability to the digital

output (

) of the TGM-100.

DVI VIDEO

Connect to TGM-DVC DVI to Composite Video Converter to view

video on a Touch panel Controller or TV/Monitor w/ a DVI input.

ESATA

Use this socket to connect a Sunﬁre eSATA drive.

COMPONENT VIDEO OUT

Connect the Y, PBand PRComponent Video Out of the Media-

Server to the Y, PBand PRCOMPONENT VIDEO IN of a suitable

TV to display the TV User Interface. You may also need to switch

the TV to the relevantAUX input to display the picture.

COMPOSITE VIDEO OUT

Connect the composite Video Out of the TGM-100 to the com-

posite input of a suitable PAL or NTSC TV to display the TV User

Interface. You may also need to switch the TV to the relevant AUX

input to display the picture.

S-VIDEO OUT

Connect the S-VIDEO output of the TGM-100 to the S-VIDEO

input of a suitable PAL or NTSC TV to display the TV User Inter-

face. You may also need to switch the TV to the relevant AUX

input to display the picture.

ANALOG AUDIO OUT

This analog audio output should be connected to the input jacks

of a pre-ampliﬁer, receiver or whole-house controller.

IR INPUT

The IR INPUT connection allows remote control information to be

carried from other devices directly into the TGM-100.

COAXIAL DIGITAL AUDIO OUT

By connecting the coaxial jack to a digital audio component (D/A

converter, A/V ampliﬁer etc.), digital signals from the TGM-100

can be transmitted directly from the system without ﬁrst being con-

verted to analog. This output may not be used for making a digital

copy of your media.

OPTICAL DIGITAL AUDIO OUT

The digital optical output can be used to transmit high quality

audio to a device with a digital optical input (D/A converter, A/V

ampliﬁer etc.) using an optical ﬁber cable. The advantage of using

the optical output is that it has low signal loss and is completely

isolated from the ground loop.This output may not be used for

making a digital copy of your media.

LAN (ETHERNET) PORT

The Ethernet port is used to connect the TGM-100 to a Gigabit

Ethernet network or high speed Internet connection.

USB PORT

Allows the TGM-100 to communicate with supported USB

devices.

RS-232 PORT

For use w/ third-party control systems.

POWER CONNECTOR

Connect the supplied power cord to this connector to provide

power to the unit.

Installation Manual

CHAPTER 2

2. Connections

Multi-Room Connections

The TGM-100 is a versatile device capable of communi-

cating with a number of multi-room control systems. The

installation and conﬁguration of such complex control sys-

tems varies, depending on the manufacturer. We recom-

mend that you do not attempt installation with such devices

before acquiring training or documentation from the control

system manufacturer.

The illustration below shows a typical multi-room conﬁgura-

tion, incorporating a TGM-100 Server, TGM-100C Clients

and different types of external storage devices. Output

channels from the TGM-100 may be connected to a multi-

room control system so that they can be distributed to

different rooms around the home. In order for the TGM-100

TVs

Amplifers/Speakers

Video

Audio

TGM-100C Clients (Max=6)

Gigabit

Ethernet

LAN

Gigabit

Switch

TGM-HDC

iSCSI External Storage

TGM-HD1

eSATA

Storage

LAN eSATA

Cable

TGM-100 Server

Video Audio

Amplifer/Speaker

RS-232

Cable

UPS

LAN

Gigabit

Ethernet

Video

Audio

to communicate with the multi-room control system, a con-

nection must be made using either infrared, RS232 or IP,

depending on the control system.

Each TGM-100C Client in the system acts as an additional

independent digital and analog video and audio output.

TGM-100C Clients only support external storage via a

TGM-100 Server.

Altri manuali per TGM-100 Server

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Sunfire Lettore multimediale

Sunfire

Sunfire TGM-100 Server Manuale utente

Manuali Lettore multimediale popolari di altre marche

Visual Land

Visual Land Impulse Manuale utente

limHD

limHD 200i Manuale utente

Transcend

Transcend DMP10 Manuale utente

Philips

Philips GoGear Muse SA2MUS08 Manuale utente

Fantec

Fantec MM-HDRL Manuale utente

Dune HD

Dune HD Duo 4K Manuale utente

IAdea

IAdea HMP-505S Manuale utente

Camos

Camos MMS-1000 Manuale utente

Energy

Energy 75 Series Manuale utente

Z3 Technology

Z3 Technology DME-03 Manuale utente

Sony

Sony SVR-2000 Guida utente

Meicheng

Meicheng HD-1080K12 Manuale utente

DENAFRIPS

DENAFRIPS ARCE Manuale utente

Topaz

Topaz CMS Media Player Istruzioni per l’uso

InFocus

InFocus LightCast Manuale utente

IconBiT

IconBiT XDS1003D Manuale utente

Quanmax

Quanmax QDSP-2090 Series Manuale utente

Samsung

Samsung MP-80S Manuale utente