Sunit fd Manuale utente
USER’S GUIDE
fd
fc
®
®
2
© Sunit Oy 2011.
v.18032011
3
4
TABLE OF CONTENT
Declaration of conformity.....................................................................................
Identification data.............................………………………………………........
Precautions and safety..........................................................................................
Hardware configuration
Central Processing Unit ............................................................................
Connections ................... ..........................................................................
Display ......................................................................................................
Using the computer
Start-up and shut-down ........... .................................................................
Installing and removing the SIM card ......................................................
Resetting the computer..............................................................................
Maintenance ....... .................................................................................................
Startup signals ......................................................................................................
APPENDIX A
Sunit Telematics quick start guide........................................................................
APPENDIX B
Sunit touch screen calibration …..........................................................................
Special requirements for taxi installation ……………………………………...
5
6
7
7
8
9
10
12
12
14
14
16
17
20
21
DECLARATION OF CONFORMITY
Sunit Oy declares under our sole responsibility that the products Sunit c and Sunit d to
which this declaration relates are in conformity with the Commission Directives 72/245/EEC
and as amended by 2004/104/EC, includiing latest 2006/28/EC. Declaration of conformity is
available at our site www.sunit.fi
.
This manual gives You the guidance of Sunit fc and Sunit fd On-board computer. Familiar-
ize to this manual carefully before taking the computer in use. This manual includes copy-
right protected information. Copying of this manual or parts of it without permission of the
author is forbidden. Sunit Oy develops products continually, therefore we reserve right to
make changes to the products described in this manual and it’s instructions without the
prior notice.
A wide range of accessories is available for Sunit On-board computers. You can read more
about our products on our web-site www.sunit.fi. There you can additionally find the current
drivers, manuals, software upgrades and the instructions for installation.
Please become acquainted with the folder C:\Support. from there you will among others
find device drivers, Service Packs, user guides, warranty clause and utility programs .
More information about the PC’s, displays, accessories and softwares can be obtained by
©2009SunitOy
CE Marking on a product is a manufacturer's declaration that the product complies with the es-
sential requirements of the relevant European health, safety and environmental protection legisla-
tions.
The Federal Communications Commission (FCC) is an independent United States government
agency. The FCC is charged with regulating interstate and international communications by ra-
dio, television, wire, satellite and cable. The FCC's jurisdiction covers the 50 states, the District
of Columbia, and U.S. possessions.
6
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed
of separately from your household waste. SUNIT products are manufactured with high quality ma-
terials and components which can be recycled and reused. Please dispose of this equipment at
waste collection or recycling centre. Please help us to conserve the environment we live in!
7
IDENTIFICATION DATA
CPU identification data finds from the frame of the unit:
- CPU model and type
- year and week of manufacturing
- ASSY version
- serial number
- CE and FCC marking
- recycling mark*
Display’s identification data is located in the back cover of the display
- year and week of manufacturing
- ASSY code
- display model
- serial number
- CE and FCC marking
- recycling mark*
Please do not remove identification data labels!
PRECAUTIONS AND SAFETY
Traffic safety
Unnecessary use of the On-board computer may endanger traffic safety. It’s recommended to stop
the vehicle before using the computer by the driver. To avoid accidents keep all peripherals (e.g. key-
board) in store pockets.
Installation and service
Only authorized service is allowed to install, repair or open the device. Unauthorized repair or open-
ing of the device may cause faulty operation and revoke the warranty. Incorrect wiring may disturb
insufficiently protected electronic systems. For further information, please contact [email protected]
Turning off the computer
Turning the computer off otherwise than using operating system’s Shut down –command may cause
corruption of the data, drivers or operating system, and computer may no more start correctly.
Connecting of the peripherals
The compatibility of the peripheral devices should be ensured from the manufacturer or reseller of
the device. Insufficiently EMC and EMI protected peripherals may disturb electronic components of
the vehicle.
8
HARDWARE CONFIGURATION
Configuration of Sunit On-Board computer
Sunit On-board computer comprises of:
Central Processing Unit, Display Unit, Keyboard, Mouse, Display cable, BUS-cable. Power Supply
cable and GPS/GPRS antenna. Depending on the application requirements, configuration can in-
clude also integrated GSM/GPRS/EDGE phone, 802.11b/g WLAN adapter and CAN-interface.
CPU
Sunit CPU. Guidance for removing the front panel is on page 10.
1
2
3
CPU with the front panel removed.
1. SIM-card slot (page 10)
2. Warning message (page 11)
3. Resetting button (page 12)
9
CONNECTIONS
1. WLAN antenna cable connection (brown)
2. WLAN auxiliary antenna connection
3. BUS 3USB+LAN connection (page 11)
4. Video input
5. Main display connection
6. Second display connection
7. Audio input/output connection
8. GPS-antenna connection (blue)
9. GPRS-antenna connection (red)
10. Traffic Message Channel connection
11. Vehicle interface connection
Options:
12. Video inputs 2 - 4B
- input 4A/4B is shared, preferred input can be selected from application
13. 3 x RS232/485 serial connection
14. RS232/485 serial connection
12 3 4 5 6
7 8 9 10 11 12 13 14
10
DISPLAY
f7”, f10” and f12” display buttons and indicators
1. Power button and brightness adjustment
- start computer by pressing the power button
- when computer is running, pressing the power button shortly turns backlight off/on
- minimum brightness adjustment of the display is available by two short press of the power
button. Then every press increases minimum brightness level
- long audible signal indicates when maximum or minimum level is reached,
- if power button is not pressed in three seconds, it’s function returns to normal
- if power button is pressed and held for four seconds, the computer shuts down. This is
required only in exceptions, when operating system does not respond.
2. Multicolor-LED
- blinking green = computer is starting
- continuous green = computer is running, power is on
- blinking yellow = computer is on by internal battery
- blinking orange = warning (e.g. problem with the GPS antenna or phone)
- continuous blue = power on, backlight turned off
- continuous red = alarm (e.g. overheating, over voltage)
3. Light sensor for automatic brightness adjustment
- adjust the brightness of the display according ambient light
4. Display cable connection
4
2 1 3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Sunit Accessori per automobili
