SUNSAVER Super-Flex Manuale utente
Rated Solar Power 14-Watt (max)
USB2.0 Output 5-Volt, 2.0-Amp (max)
DC5521 Output 14.8-Volt (open circuit), 1.0-Amp (max)
Operating Temperature 0 — 50° C
1
Solar Charging:
Connect the charging cable to the output of the Super-Flex and the input of your
phone or device. Unfold the Super-Flex and use the stand to direct it toward the
sunlight. The Super-Flex requires natural UV light for charging.
The charging current depends on the strength of the sunlight and is aected by
time, place, weather conditions, and sunlight angle.
Every smartphone and device has a ‘Minimum Charging Current’ (MCC), which is
the minimum electrical current the smartphone or device requires to start charging.
So, the amount of sunlight the Super-Flex needs to be able to charge a smartphone
or device, depends on the specic MCC of the smartphone or device.
Tablets and some smartphones have a high MCC, which means that it needs to be
a clear sunny day in direct sunlight for the Super-Flex to be able to charge them.
However, most power banks have a relatively low MCC, so can be charged by the
Super-Flex even on cloudy and overcast days.
Therefore, we recommend the below set-up for charging a tablet or smartphone:
1. Use the Super-Flex to charge a power bank.
2. Use the power bank to charge a tablet or smartphone.
This arrangement will maximise the amount of solar energy that can be stored.
Super-Flex Power Bank Smartphone / Tablet
12
Charging a 12-Volt Battery
Charging Current Indicator Light
Product Use & Care
If the Super-Flex is exposed to dirt, dust, water or any other potentially damaging
substances, clean with a damp cloth and then towel dry before use.
Ensure there is no moisture inside the output before connecting the USB Cable.
Avoid bending the solar panels beyond the at position to protect the connections.
The output indicator light will change colour depending on the output current:
Purple > 350mA Blue > 550mA Green > 800mA
To make a warranty claim, please contact 027 318 9967 or sales@sunsaver.co.nz
18-Month Warranty
The Super-Flex can charge most 12-Volt batteries using the DC5521 output:
Alligator Clips
Ensure the black clip is connected to the batteries negative
terminal and the red clip to the batteries positive terminal.
Do not use this charging method outside in wet conditions.
Vehicle Cigarette Lighter Adapter
Compatible with most vehicles. Some vehicles may require the
key to be turned to the on position for this method to work.
Ensure the Super-Flex does not get too hot if on dashboard.
Note: The connector you use must have a 12-Volt regulator for constant voltage.
The alligator clips provided with the Super-Flex have an integrated regulator.
2
Indice
Altri manuali SUNSAVER Caricabatterie per batterie
