Sunwoda SunESS-5 Series Manuale utente

User manual

SunESS-5/10/15/20 series

Version：V1.0

Content 
1Safety precaution........................................................................................................................1
1 Storage and installation environment...........................................................................1
2 Battery safety guidelines...............................................................................................1
3 Warning signs and stickers............................................................................................1
4 Emergency handling......................................................................................................2
2Product description.....................................................................................................................3
1 Product introduction.....................................................................................................3
2 Appearance description................................................................................................4
3Installation guide.........................................................................................................................6
1 Environmental requirements ........................................................................................6
2 Installation physical requirements................................................................................7
3 Installation.....................................................................................................................9
3.1 Installation tools.......................................................................................................9
3.2 Packaging components.............................................................................................9
4 Installation steps .........................................................................................................11 
4Electrical connections ...............................................................................................................21 
1 Grounding instructions................................................................................................21 
2Power connector installation ......................................................................................21 
3 Cable connection.........................................................................................................22 
3.1 Single SunESS system .............................................................................................22 
3.2 Multiple SunESS in parallel.....................................................................................23 
5Power up your system...............................................................................................................25 
1 System power up.........................................................................................................25 
2 System power off ........................................................................................................25 
3 Display description......................................................................................................26 
4 System configuration...................................................................................................26 
6Maintenance and troubleshooting ...........................................................................................29 
1 Routine maintenance..................................................................................................29 
2 Fault checklist..............................................................................................................29 
7Warehouse storage guidelines..................................................................................................31 
1 Packaging guidelines ...................................................................................................31 
2 Storage ........................................................................................................................32 
8Dispose of used batteries..........................................................................................................32 
9Detailed specifications ..............................................................................................................33 
Contact information..................................................................................................................34 

1Safety precaution

Read the manual carefully and operate in accordance with the safety precautions. Refer to local

safety regulations on items not covered in this manual. Electrical installation, maintenance must

be performed by professional / qualified personnel.

1.1 Storage and installation environment

Handle the product gently, prevent from dropping

Avoid open flame; keep away from flammables, explosives or corrosive chemicals

Choose cool and dry place for storage and installation

Prevent from water or humid intrusion

Prevent from accidental access (children and animals)

Do not step on the product packaging.

Do not place any foreign objects on top of the battery pack.

Do not store the battery pack upside down

1.2 Battery safety guidelines

Prevent from electrostatic discharge

Wear insulating gloves when handling batteries.

Do not energize auxiliary power during installation

Check the polarity carefully before switching on the system

Defected or damaged batteries shall not be charged or discharged.

1.3 Warning signs and stickers

WarningGeneric hazard

DO not mix with domestic

Warning

High Voltage -

Electrical shock hazard

Please recycle

No flame

This side up

No stepping on

User manual

Warning

High temperature

Protective Earth

(connector)

Warning

High Voltage

Wait 5 min till fully discharged

Protective Earth

(general identification)

Do not short circuit

(cut off power)

Keep away from children

Fragile

Do not get wet

1.4 Emergency handling

Wear personal protective equipment (PPE) such as goggle, facemask, insulated gloves and boots.

Evaluate the situation before taking remedy action. When it is safe to do so, disconnect external

AC or DC power connection.

Damaged or deformed battery enclosure

Risk of chemical leakage (i.e. electrolyte) and internal short-circuit.

Warning

Deformed or severely damaged battery pack can lead to piercing of cell pouch (chemical leakage)

or internal short-circuit (thermal runaway). The damaged battery pack can release toxic gas. Keep

away from it.

In case of accidental skin contact, wash the skin thoroughly with soap and seek medical advice. For

eye contact, wash under running water (~15 minutes) and require immediate medical attention.

Fire hazard

If the fire is not from the battery or not spread to the battery, use FM-200 or CO2 fire extinguisher

to put out the fire.

If the battery pack catches fire, do not attempt to put out the fire and evacuate immediately.

Seek medical in case of inhalation of pungent and toxic fumes.

Keep damaged batteries isolated and call your local fire department. Contact service for further

support.

Water damage

Risk of electric shock and internal short-circuit. In case of splash or water spillage, when it is safe

to do so, dry the product. If any part of the battery system is submerged, keep away from water.

Do not reuse the submerged battery. Contact a service for support.

5 m in

2Product description

SunESS is a plug-in energy storage system compatible with majority PCS brands. This document

provides product introduction, installation, commissioning, maintenance, troubleshooting,

packaging and transportation information.

2.1 Product introduction

Residential energy storage system with lithium iron phosphate (LFP) technology

Modular design; single battery system with 5 to 20kWh (1 – 4 pcs battery)

Indoor or outdoor installation (IP55)

Expandable to 60kWh (3 SunESS connected in parallel)

PCS communication interface: CAN or RS485

Bluetooth and WiFi for Mobile APP (PowerLite)

Advanced battery management system (BMS) provides data acquisition, status

monitoring and control to ensure the safe and reliable operation of the system.

Figure 2-1-1 SunESS configurations

5kWh

10kWh

15kWh

20kWh

2.2 Appearance description

 Appearance of the whole system

Figure 2-2-1 Appearance of the whole machine

①Control module ② Battery module ③ Mounting the base

②

①

③

Figure 2-1-2 System topology

WiFi Internet

GPRS

APP

DC Power cable

Signal cable

Wirelisscommunication

Products within the dotted line are provided by SUNWODA ENERGY

PCS/INVERTER

Control module

Figure 2-2-2 Left side of control module

①Power button ② DC breaker ③ Wi-Fi antenna ④ display

Figure 2-2-3 Right side of the control module

① Output Negative (DC-)

② Output Positive (DC+)

③ Parallel communication 0 (COM0)

④ Parallel communication 1 (COM1)

⑤ PCS communication (485/CAN)

⑥ Maintenance (LAN)

⑦ Protection earth (PE)

Battery module

Figure 2-2-4 Structure diagram of battery module

① Handle ② Power/communication connector

①

②

①

③

④

②

①

⑦

③

⑤

④

②

⑥

3Installation guide

3.1 Environmental requirements

a. Ambient temperature: -10℃~+50℃ (recommended: 10℃～35℃ or 50℉~95℉).

b. Ambient humidity: 10-95%.

c. Altitude <= 2000m.

d. For outdoor installation

Avoid direct sunlight

Avoid rain and snow

Avoid location susceptible to flooding

Install under shed if possible

e. For indoor installation

3 feet clearance from doors, windows, driveway or other batteries

Keep away from heating device.

Prevent from corrosive chemicals

Prevent from water spillage

Consider location equipped with ventilation fans, smoke, heat, or flammable gas

detector

SunESS performance degrades when ambient temperature is below 10℃(50℉) or above 40℃

(104℉) degrees.

3.2 Installation physical requirements

a. Item inspection

b. Installation clearance

c. Level control

≥1000mm（39.37in）

≥915mm（36in）≥915mm（36in）

≥600mm（24in）≥600mm（24in）≥600mm（24in）

≥600mm

（24in ）

d. L-bracket fixing bolt positioning

Take into account the actual surface condition before fixing the L-bracket: the bolt spacing is 406

mm (16 inches) for the inner ones and 508mm (20 inches) for the outer ones, as illustrated below.

e. Prepare the wall-mounting surface before drilling

Avoid electricity wire, metal conduit or pipe inside the wall; consider using wall scanner

(wall detector)

∠0-3°

（20in）

∠>3°

（20in）

∠>3°

（20in）

∠0-3°

（20in）

Wall

Floor

（20in）

Battery

Floor

（20in）

Battery

Wall

508mm（20inches）

406mm（16inches）

Wall

L- bracket

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Sunwoda Magazzinaggio

Sunwoda

Sunwoda SunESS-5H Series Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente