Super SOCO TS Manuale utente
USER INSTRUCTIONS 2
DESCRIPTION OF COMPONENTS AND PARTS 3-4
OPERATION GUIDE 5-8
RIDING GUIDE 9
CHECKS BEFORE RIDING 10-11
BATTERY USE INSTRUCTIONS 12-14
MAINTENANCE-15
ROUTINE CLEANING AND MAINTENANCE-16-17
GEBRAUCHSANWEISUNGEN 18
SCHEMA GLOBAL DE LA MOTO 19
KOMPONENTEN- UND TEILEBESCHREIBUNG 20
BENUTZERHAN DBUCH 21-24
MANUEL D'UTILISATION 25
FAHRANLEITUNG 26-27
ANWEISUNGEN ZUR BATTERIEANWENDUNG 28-30
WARTUNG 31
GÄNGIGE PROBLEME UND FEHLERBEHEBUNGSMETHODEN 32-40
INSTRUCTIONS D'UTILISATION 41
SCHEMA GLOBAL DE LA MOTO 42
DESCRIPTION DES COMPOSANTS ET DES PIECES 43
MANUEL D'UTILISATION 44-50
INSTRUCTIONS D'UTILISATION DE LA BATTERIE 51-53
MANUEL D’ENTRETIEN 54
PROBLEMES COURANTS ET METHODES DE DEPANNAGE 55-56
GARANTIES 57-63
CONTENTS INDICE
CONTENUTI
INHALT
SOMMAIRE
MANUAL DEL USUARIO-64
DESCRIPCION DE LOS COMPONENTES Y PIEZAS 65-66
GUIA DE FUNCIONAMIENTO 67-71
PUESTA EN MARCHA PARA LA CONDUCCION 72-73
INSTRUCCIONES DEL USO DE LA BATERIA 74-76
MANTENIMIENTO-77
PROBLEMAS COMUNES Y MÉTODOS DE SOLUCIÓN DE PROBLEMAS 78-79
INSTRUCCIONES DE SEGURIDAD 80
DESCRIZIONE DEI COMPONENTI E DELLE PARTI 81-82
OPERAZIONI PER LA GUIDA 83-86
LA GUIDA 87-90
ISTRUZIONI PER L’USO DELLA BATTERIA 91-92
MANUTENZIONE 93
PROBLEMI COMUNI E METODI DI RISOLUZIONE 94-95
ASSISTENZA POST-VENDITA 96
LE GARANZIE 97-100
ISTRUZIONI PER ALTRI ARTICOLI NON COPERTI DA TRE GARANZIE 101-102
디렉토리
부품 설명 103
계기판-104
수납 상자와 시트 열기 105
메인 스위치 106
시동 방법 107-108
배터리 충전 방법 109-111
1
USER INSTRUCTIONS
Safety Instructions
Welcome to the family of SOCO owners! We will guide you to know every function for the right and safe use
of TS smart electric bikes. To ensure your safety, please read this manual carefully before riding and make sure
you are always following the requirements below:
Fully understand the information in (.his manual, including but not limited to the relevant instructions, precautions and warnings.
Fully understand the operation and contingency measures of TS smart electric bikes.
Be fully aware of warning labels of TS smart electric bikes.
SOCO will take any responsibility resulting from the unauthorized modification, failure to use original spare parts, or installation
of components that affect the performance and safety of the bike.
Please contact the SOCO Customer Service Center if you have any questions about this bike. We are at our service at any time.
Wish you safe and pleasant riding experience!
To ensure the safety of you and others, please make sure to observe the following matters:
Do not ride after you take medications which may affect your riding ability, drink alcohol, or when you are unwell.
Observe traffic regulations and traffic signs and confirm the surrounding road conditions and bike conditions at any time, so
as to actively avoid danger.
Wear safety equipment, such as helmet, and appropriate protective clothing if necessary, such as gloves and boots.
Perform a basic check each time before riding, so as to confirm the light, brake, tread and tire pressure and check other
parts for looseness or abnormal noise, and regularly go to SOCO Service Center for maintenance.
In order to ensure the safety of you and others, please DO NOT use high beam in good lighting conditions. The continuous
use of high beam will cause the visual disturbance to vehicles and pedestrians on the opposite side, thus affecting normal
driving.
Please do not make or answer any call during riding, which is likely to cause traffic accidents.
2
Headlamp
Rearview mirror
Storage box
Saddle Tail lamp
Rear license
bracket
Brake cylinder
Winker
Rear brake lever
Instrument panel
Rear brake lever
Speed control handlebar
Right-handlebar switch set
Left-handlebar switch set
Front shock
absorber
Spoke-type
aluminum hub
Brake disc
FOC vector controller
Adjustable pedal
Electronic side stand
Brake disc
Electric motor
Rear swingarm
SIDE VIEW TOP VIEW
SCHEMATIC DIAGRAM OF COMPONENTS AND PARTS
DESCRIPTION OF COMPONENTS AND PARTS
3
Speed / fault code
Display current speed When
fault indicator goes on, fault
code will be displayed.
Display current output current.
Display current battery level
Display current battery level.
Display current gear
Display current
ambient temperature
Display current time
Display the total mileage.
Display the temperature under
current operating conditions.
Real-time current
Power display bar
Ambient temperature Power display
Gear display
Distance per charge/
trip distance/
rotating speed
Clock
Total mileage
Controller temperature
Cruising Gear, corresponding to the number “2”
Sport Gear, corresponding to the number “3”
Fault Charging Data connection
Economical Gear, corresponding to number ”1”
High beam indicator, indicating high beam on.
Parking indicator, indicating the parking state.
Winker indicator, flashing in synchronization with the
left and right winker.
The charge indicating lamp lights up when less than
ten electricity remains.
The start indicator lights up when the motor
can be started.
DIAGRAM OF INSTRUMENT PANEL
DESCRIPTION OF COMPONENTS AND PARTS
RANGE Remaining distance per charge. RPM Current riding distance.
TRIP Current rotating speed.
TURN ON SWITCHING ADJUSTMENT MODE
1. Press the high beam switch for 3 times
(i.e., the high beam indicator flashes for 3 times) in continuous time such as 4 seconds;
2. At this time, the current display mode
(driving range/ single mileage/ revolving speed) is flashing, indicating that the motor
has entered the adjustment mode;
SWITCH THE DISPLAY UNIT (KM AND MILE, KM/H AND MPH)
Retract the side stand, and enable the switching adjustment mode. Toggle the "parking
brake handle switch" from OFF (P gear indicator on) to ON (in 2 seconds), and then to
OFF, thus switching the display units (km and mile, km/h and mph); toggle the "parking
brake handle witch" from OFF to ON (in more than 2 seconds), and then to OFF, thus
turning on the LCD backlight. (Remarks: now the brightness is fixed at the brightest level).
DISPLAY SWITCHING (DRIVING RANGE / SINGLE MILEAGE / REVOLVING SPEED)
Turn on switching adjustment mode, and turn on or off the high beam switch to toggle
the display mode (driving range / single mileage / revolving speed) once.
Cycle the switching in this way.
4
OPERATION GUIDE
SMART REMOTE CONTROLLER OPERATIONSTART BUTTON
High/low beam switch button
Winker button
Horn button
Press up to turn on the high beam.
Press down to turn on the low beam.
Dial to the left side to turn on the left winker.
Dial to the right side to turn on the right winker.
Press to make a sound and release to stop.
Headlamp button
Parking button
Gear shift button
Dial up to to turn on the headlamp.Turn downward to AUTO
to automatically turn on the headlights.The headlights turn on
automatically according to the brightness of the environment.
Dail down to to turn off the headlamp.
Parking button has two modes: press to park the bike and
parking indicator P goes on; and press again to exit the parking
status.
The bike has three modes,
i.e., 1 "eco", 2 "cruise", and 3 "sport". Dial rightwards for "eco",
middle for "normal"and left for "sport".
5
OPERATION GUIDE
OPEN THE STORAGE BOX AND SADDLEHOW TO OPERATE THE PHYSICAL
HANDLEBAR LOCK
After unlocking the bike with the Smart Remote Controller,
press the start button, and the bike will be in the “Powered”
state; press it again to turn off the bike.
With the advanced Smart Remote Controller, you can easily
lock or unlock your TS smart electric bike by simply pressing
the button within 50 meters.
Center Letter blinks；
Protected
Center Letter stays on；
Standby
Outer-ring light stays on；
Power-on
Lock button
Unlock button
1. Lock button. When the bike is in the [Static State], press
the lock button, and the start button flashes. The bike enters
the [Locked State].
2. Unlock button. Press the unlock button, and the start
button stays on. The bike enters into the [Unlocked State].
6
OPERATION GUIDE
OPEN THE STORAGE BOX AND SADDL
After the bike stops, turn the handlebar to the far
left, insert the key into the physical handlebar lock,
and rotate it rightwards to lock the bike.
Insert the key and rotate it rightwards, and the
storage box will be opened when you hear a [Click]
sound.
Insert the key and rotate it leftwards to open the
saddle. Basic tools are provided inside saddle.
Insert the key into the physical handlebar lock, and
rotate it leftwards to unlock the bike.
How to lock
the bike
How to Unlock
the bike
7
OPERATION OF AIR SWITCH
OPERATION OF ADJUSTABLE PEDAL
As the protection switch for the main power of TS smart electric bike,
the air switch will automatically disconnect to ensure safety when the
bike circuit is abnormal or the current caused by short circuit exceeds
the set safe value
TIPS： In order to protect your safety, please turn off the air
switchwhen cleaning, storing the bike for a long time, or
re-moving the battery pack.
The original adjustable pedal provides three riding modes,
and can be adjusted for comfort.
Open the saddle and take out the included Allen wrench;
Unscrew the nut under the pedal;
Adjust the pedal to the appropriate position
(three positions) and tighten the nut.
OPERATION GUIDE
8
RIDING GUIDE
CHECKS BEFORE RIDING
Make sure to check the following items before riding a TS Smart Electric Bike, which will guarantee your safety on the road.
1.Whether the handlebar is stable and flexible when turning.
2.Whether the switches on the right and left handlebars can work normally.
3.Whether the speed control handle can work normally.
Make sure the tire pressure is normal. The suggested tire pressure is 20-25psi for front wheel and 26-32 psi for rear wheel.
4.Check tire surface for cracks, damage, wear, and foreign matter puncture or attachment
5.Whether the tread depth is sufficient (>0.8 mm).
6.Whether any fault warning light on the instrument panel goes on after being powered.
7.Whether the battery is fully charged.
8.Whether the head and tail lights, brake lights and winkers can work normally.
9.Whether the horn can work normally.
10.Whether the rear mirrors are clean. Adjust them to the appropriate angle.
11.Whether the brake oil is sufficient, and whether the handlebars and brake system can work normally.
12.For any abnormality or operational concern, please contact SOCO Customer Service Center.
9
CHECKS BEFORE RIDING
CHECKS BEFORE RIDING
Make sure to check the following items before riding a TS Smart Electric Bike, which will guarantee your safety on the road.
2.Put on the helmet, ride the TS, and retract the electronic side stand.
10
Indice
Lingue:
Altri manuali Super SOCO Scooter
