(8) Large pieces of trash such as beer cans or jar lids may sound like
good targets no matter what you do. With a little practice, however, you
will be able to tell the difference between a large target and a small coin
sized object.
2 ”SENS” function
⑴ Rotate clockwise to turn on the power, rotate to the full to set the
highest SENS. High SENS should be used in the most detections.
⑵Rotate counter-clockwise to decrease the SENS. Rotate
counter-clockwise to turn off the power.
NOTES
The environment will directly affect the detection result. Through field
detection you will master how to properly conduct the operation. Some
special circumstances are listed in below to give some hints how to
detect and what to note when you detect in such environment.
1. If there are 2 detectors operating at the same time in your detection
area while they’re also close to each other, it’ll lead to the mutual
disturbance. In this case, you may decrease the SENS or keep the 2
detectors far away from each other.
2. If there is interference from electrical cable or TV/Radio station in your
searching area, lower the sensitivity or move away from the current
searching area of disturbances.
3. The proper SENS setting is very important when detecting in complex
environment. Sometimes a too high SENS will on the contrary lead to
the non-ideal detecting result, because the soil mineralization and junk
metals will both influence the signal which in turn affects the normal
detection. Thus you need to repeat the SENS adjustment to reach the
best condition. Only in most ideal environment, can full SENS be set.
4. The detection cannot be conducted if there is bulk metal near the
object metal, since the signal form the bulk metal may exceed the one
from the valued object metal. In this case, you have to remove this bulk
metal or give up detection in this searching area.
－ 6 －
