Superlux E205U Manuale utente
1
English
Contact
Marketing and sales
Goang-Fann Co., Ltd.
+886-2-26931323
Manufacturing & logistics
Superlux Enterprise
Development ( Shanghai ) Co., Ltd.
E205U
USB CONDENSER
MICROPHONE
2
E205U
USB CONDENSER MICROPHONE
DESCRIPTION
The E205U is a high quality condenser micro-
phone with an advanced A/D and USB interface
which gives you digital recording capabilities
instantly with no external digital interface or
software driver required. It is USB compatible
with Mac, Windows, and most DAW software
programs, including GarageBand. The E205U
offers premium quality audio recording with ease
and mobility, and with its pivoting stand mount
and 9.8 ft. (3-meter) USB cable, the E205U is a
valuable kit for any project studio.
FEATURES
• Smooth, at frequency response.
• Plug in and start recording, no drivers required.
• Up to 16 bit / 48 kHz sampling.
• Powered by USB power, no external power
required.
• Headphone output and volume control.
3
SPECIFICATIONS
Type Back Electret Condenser
Polar Pattern Supercardioid
Frequency Response 30-18,000 Hz
Sensitivity (at 1k Hz Open Circuit Voltage) -38 dBV/Pa (12.6 mV)
Max. SPL >135 dB SPL
Power Requirements USB 5V, 30 mA
Resolution Up to 16 bit/48k Hz sampling rate
Finish Champagne silver
Connectors USB B-TYPE, 1/8”(3.5mm) phone connector
Dimensions Ø54 × 150 mm (Ø2.13” × 5.9”)
Net Weight 422 g (14.9 oz)
*Note:Specications are subject to change.
E205U FREQUENCY RESPONSE (SUPERCARDIOID)
4
YA2 threaded
adapter
HM85 pivoting
stand mount
Pouch 3-meter
cable
DS01
Table stand
FURNISHED ACCESSORIES
SYSTEM REQUIREMENTS
USB
USB 1.1 or 2.0, powered
OPERATING SYSTEM
Microsoft Windows 7
Microsoft Windows 10
Microsoft Windows 2000 Professional Edition
Microsoft Windows XP Home / Professional Edition
(service pack 1.0 or later, or use the USB audio driver update from Microsoft)
Microsoft Windows Vista™ Business Edition
Apple Computer Mac OS X 10.0 or later Edition
Apple Computer Mac OS X 10.1 or later Edition
RAM
64MB RAM (minimum)
5
VOLUME
E205U
VOLUME
E205U
Unit:mm/inch
A
C
B
D
USB Power Indicator
When it is lit up, it means the USB connec-
tion is done and E205U get the power from
USB interface.
Headphone Volume Control
Pop-out level control to adjust the overall
volume of the Headphone output.
Headphone Output Jack
1/8-inch (3.5mm) stereo jack for connect-
ing headphones or studio monitors.
USB connector
E205U involves a USB B-type connector,
it is allowed to connect to laptop with USB
A-type jack.
FUNCTION DESCRIPTION
A
B
C
D
6
ON A TABLE
Through optional table stand
HM6, You may put the E205U
on a table and do recording.
ON A STAND
By using a micro-
phone stand, the
E205U can be
mounted on it for
recording. CONNECTIONS USB CONNECTOR
A separated 3-meter cable with USB
A-type connector allowed to be connected
to a computer with USB port.
*Notice: The included USB cable is for laptop with A-type
connector. For computer with another connector type (ex.
C-type), please use connector adaptor.
INSTALLATION
7
Next, launch your DAW, turn down the
main output level and select the E205U
for the input.
Next, put on your headphones that is
connected to the headphone output of
E205U, position the E205U to the sound
source then adjust the volume control until
you reach a comfortable listening level.
Now, setup the level of the E205U and
there are few ways to do this depending
on your computer system. You can set
the microphone’s input level in the Sound
playback in Windows or in the Sound
dialog box in the System Preferences if
you are using the MAC OS.
Set up a mono record track in your DAW.
Set level of the microphone by raising the
Input level control in your DAW or system
to about half way up.
Now, follow the instructions of your DAW software to enable the track for recording and
you’re ready to record.
*Notice: If the microphone level of E205U are too loud or not enough, please check your DAW software or refer to Trou-
bleshooting page in this manual to adjust the level in Windows and Mac computer system.
5
9
7
6
8
Now, plug the other end of the USB cable
into an available powered USB port on
your computer.
4
QUICK START
You can position the E205U on an option-
al stand by using included accessories.
1
Plug the B type connector of the included
USB cable into the USB socket on the
bottom of the E205U.
3
Be sure to position the side of grille net to
the sound source and keep the Superlux
logo and LED indicator face the direction
of sound source.
*Notice: Be sure to check the USB audio device driver
setup for Windows and Mac OS to confirm your computer
has recognized the E205U.
2
8
Hit “Control Panel” >> Hit “Hardware and Sound”
1
WINDOWS OPERATING SYSTEM
USB AUDIO EQUIPMENT DRIVER
If you encounter a problem, please check whether driver has been setup successfully.
9
Sound >> Hit “Manage audio devices”
2
10
Hit “Recording” tab >> Click “Superlux E205U” >> Click “Set Default” to select
Superlux E205U as the default microphone.
3
*Notice: If there is already the green tick next to the E205U microphone symbol and the “Set Default” button is not able
to be hit (dark gray color), the Superlux E205U has been selected as the default device successfully.
Altri manuali per E205U
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Superlux Microfono
Superlux
Superlux TM58 Series Manuale utente
Superlux
Superlux CMH8C Manuale utente
Superlux
Superlux PRA518 Manuale utente
Superlux
Superlux E12A Manuale utente
Superlux
Superlux L401U Manuale utente
Superlux
Superlux E303 Manuale utente
Superlux
Superlux S125 Manuale utente
Superlux
Superlux E202 Manuale utente
Superlux
Superlux E421B Manuale utente
Superlux
Superlux HMC 660 Manuale utente
Superlux
Superlux UT6 Series Manuale utente
Superlux
Superlux PRA-518AS Manuale utente
Superlux
Superlux DRKB5C2MKII Manuale utente
Superlux
Superlux D108 Manuale utente
Superlux
Superlux S125 Manuale utente
Superlux
Superlux WH5 Manuale utente
Superlux
Superlux PRA528DS Manuale utente
Superlux
Superlux CMH8CH Manuale utente
Superlux
Superlux PRA538 Manuale utente
Superlux
Superlux D 10B Manuale utente
