Supero Supero SMT IPMI Manuale utente
SMT IPMI
User's Guide
Revision 2.1c
Manual Revision 2.1c
Release Date: , 2013
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2013 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of
this manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: Refer to Supermicro's web site for FCC Compliance Information.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
About this User's Guide
This user guide is written for system integrators, PC technicians and
knowledgeable PC users who intend to congure the IPMI settings supported by
the Nuvoton WPCM450 BMC Controller embedded in Supermicro's motherboards.
It provides detailed information on how to congure the IPMI settings supported by
the WPCM450 Controller.
Note: Nuvoton Technology is a subsidiary of Winbond Corp.
User's Guide Organization
Chapter 1 provides an overview on the Nuvoton WPCM450 Controller. It also
introduces the features and the functionality of IPMI.
Chapter 2 provides detailed instructions on how to congure the IPMI settings
supported by the WPCM450 Controller.
Chapter 3 provides the answers to frequently asked questions.
Conventions Used in This User's Guide
Pay special attention to the following symbols for proper IPMI conguration.
Warning: Important information given to avoid IPMI conguration errors,
Note: Additional information given to ensure correct IPMI conguration
setup.
iii
Preface
SMT IPMI User's Guide
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: [email protected] (General Information)
Asia-Pacic
Address: Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd
Chung-Ho Dist., New Taipei City 235
Taiwan
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3991
Web Site: www.supermicro.com.tw
Technical Support:
Tel: +886-(2)-8226-3990
iv
Preface
Notes
v
vi
SMT IPMI User's Guide
Table of Contents
Preface........................................................................................................... 3
Chapter 1 Introduction..............................................................................1-1
1-1 Overview of the Nuvoton WPCM450 BMC Controller .................................... 1-1
WPCM450 DDR2 Memory Interface............................................................... 1-1
WPCM450 PCI System Interface.................................................................... 1-1
Supermicro IPMI Features .............................................................................. 1-2
1-2 WPCM450 Block Diagram .............................................................................. 1-3
1-3 Introduction to the IPMI Platform .................................................................... 1-3
1-4 Motherboards Supported ................................................................................ 1-4
1-5 An Important Note to the User........................................................................ 1-4
Chapter 2 Conguring the IPMI Settings................................................2-1
2-1 Conguring BIOS ............................................................................................ 2-1
2-2 Conguring the IP/MAC Addresses for Remote Servers................................ 2-4
Using the IPMICFG Utility to Set the IP/MAC Addresses for Remote Servers...
........................................................................................................................ 2-4
2-3 Connecting to the Remote Server .................................................................. 2-6
Using the IPMIView to Connect to the Remote Server .................................. 2-6
Using the Browser to Connect to the Remote Server .................................... 2-6
2-4 Accessing the Remote Server via Console Redirection Using the Browser.. 2-7
To Log In to the Remote Console................................................................... 2-7
2.5 IPMI Main Screen ........................................................................................... 2-8
2.6 System Status ................................................................................................. 2-9
2.7 Server Health ................................................................................................ 2-10
2.7.1 Sensor Readings ..................................................................................2-11
2.7.2 Event Log............................................................................................. 2-13
2.8 Conguration ................................................................................................. 2-15
2.8.1 Conguring the Alerts Settings ............................................................ 2-16
2.8.2 Conguring Date and Time Settings.................................................... 2-19
2.8.3 Conguring Light-Weight Directory Access Protocol (LDAP) Settings 2-20
2.8.4 Active Directory Settings...................................................................... 2-21
2.8.5 Conguring the Radius Settings .......................................................... 2-23
2.8.6 Conguring the Mouse Mode Settings ................................................ 2-24
2.8.7 Conguring Network Settings .............................................................. 2-25
2.8.8 Conguring Dynamic DNS (Domain Name System) Settings............. 2-27
2.8.9 Conguring the Remote Session Settings........................................... 2-28
2.8.10 Conguring the SMTP Settings ......................................................... 2-29
2.8.11 Conguring the SSL (Secure Sockets Layer) Certication................ 2-30
2.8.12 Conguring Users Settings ................................................................ 2-31
2.8.13 Conguring Port Settings................................................................... 2-32
2.8.14 IP Access Control............................................................................... 2-33
2.8.15 Conguring Fan Settings ................................................................... 2-35
2.9 Remote Control ............................................................................................ 2-36
2.9.1 Launching Console Redirection........................................................... 2-37
2.9.2 Remote Control - Server Power Control.............................................. 2-58
2.9.3 Remote Control-Launch SOL............................................................... 2-59
2.10 Virtual Media ................................................................................................ 2-61
2.10.1 Conguring USB Floppy & Flash Device Settings ............................ 2-62
2.10.2 Conguring CD ROM Image File Settings......................................... 2-63
2.11 Maintenance.................................................................................................. 2-65
2.11.1 Maintenance - Firmware Update........................................................ 2-66
2.11.2 Maintenance - Unit Reset .................................................................. 2-68
2.11.3 Maintenance - IKVM Reset ................................................................ 2-69
2.11.4 Maintenance - Factory Default........................................................... 2-70
2.11.5 Maintenance - IPMI Conguration ..................................................... 2-71
2.12 Miscellaneous................................................................................................ 2-72
2.11.1 Miscellaneous - POST Snooping ....................................................... 2-72
2.12.2 Miscellaneous - UID Control.............................................................. 2-73
Chapter 3 Frequently Asked Questions..................................................3-1
3-1 Frequently Asked Questions ........................................................................... 3-1
Appendix A Flash Tools ......................................................................... A-1
A-1 Overview .........................................................................................................A-1
A-2 Reference........................................................................................................A-1
A-3 Using Aten Flash Tools in the DOS Environment...........................................A-1
Firmware Updating via KCS Channels ...........................................................A-2
Dumping Firmware from the BMC via KCS channels ....................................A-3
A-4 Windows/Linux Version of Flash Tools ..........................................................A-4
Appendix B Introduction to SMASH ..................................................... B-1
B-1 Overview .........................................................................................................B-1
How SMASH works.........................................................................................B-1
SMASH Compliance Information ....................................................................B-2
B-2 An Important Note to the User........................................................................B-2
B-3 Using SMASH .................................................................................................B-3
B-4 Initiating the SMASH Protocol ........................................................................B-3
To Initiate SMASH Automatically.....................................................................B-3
B-5 SMASH-CLP Main Screen ..............................................................................B-4
Table of Contents
vii
viii
SMT IPMI User's Guide
B-6 Using SMASH for System Management.........................................................B-4
B-7 Denitions of Command Verbs .......................................................................B-5
B-8 SMASH Commands ........................................................................................B-7
B-9 Standard Command Options...........................................................................B-8
B-10 Target Addressing ...........................................................................................B-9
Terms Used in the Target Addressing Diagram ..............................................B-9
Appendix C RADIUS Setup Guidelines.................................................. C-1
1-1
Chapter 1: Introduction
Chapter 1
Introduction
1-1 Overview of the Nuvoton WPCM450 BMC Controller
The Nuvoton WPCM450, a Baseboard Management Controller (BMC), supports
PCI-based 2D/VGA Graphics cores via PCI interfaces, multi-media virtualization,
and Keyboard/Video/Mouse Redirection (KVMR). The WPCM450 Controller is ideal
for networking management.
The WPCM450 interfaces with the host system via PCI connections to communicate
with the Graphics core. It supports USB 2.0 and 1.1 for remote KVM emulation. It
also provides LPC interface support to control Super IO functions. The WPCM450
is connected to the network via an external Ethernet PHY module or shared NCSI
connections.
The WPCM450 communicates with onboard components via SMBus interface, PECI
(Platform Environment Control Interface) buses, and General Purpose I/O ports.
WPCM450 DDR2 Memory Interface
The WPCM450 Controller supports 16-bit DDR2 memory with a speed of up to 220
MHz. The motherboard supports 128 MB of memory which is shared between the
BMC and onboard graphics card. For best signal integrity, the WPCM450 provides
point-to-point connections.
WPCM450 PCI System Interface
The WPCM450 provides 32-bit, 33 MHz 3.3V PCI interface, which is compliant with
PCI Local Bus Specication Rev. 2.3. The PCI system interface connects to the
onboard PCI Bridge and is used by the graphics controller.
SMT IPMI User's Guide
1-2
Supermicro IPMI Features
1. Remote KVM (graphics) console
2. Virtual Media and ISO images
3. Remote server power control
4. Remote Serial over LAN (text console)
5. Event Log support
6. Automatic Notication and Alerts (SNMP and email)
7. Hardware Monitoring
8. Overall health display on the main page
9. Out of band management through shared or dedicated LAN
10. Option to change LAN connection interface at Runtime
11. VLAN
12. RMCP & RMCP+ protocols supported
13. SMASH/CLP
14. Secure command line interface (SSH) and Telnet
15. WSMAN and WS-CIM
16. RADIUS authentication support
17. Secure browser interface (Secure socket layer - SSL support)
18. Lightweight Directory Access Protocol (LDAP) supported
19. DCMI 1.0 support
20. Backup and restore the conguration le
21. Factory defaults from web support
22. Video quality settings
23. Record video and play
24. Server data/information
25. Preview of the remote screen on the main page
26. Update Firmware through browser and OS
27. OS-independent
Altri manuali per Supero SMT IPMI
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Supero Controllori
