Supero H8DSR-8 Manuale utente
H8DSR-8
H8DSR-i
USER’S MANUAL
Revision 1.0
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates.
The manufacturer reserves the right to make changes to the product described in this manual at
any time and without notice. This product, including software, if any, and documentation may not,
in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or
machine without prior written consent.
IN NO EVENT WILL THE MANUFACTURER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING
THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING
SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. The manufacturer's total liability for
all claims will not exceed the price paid for the hardware product.
Unless you request and receive written permission from the manufacturer, you may not copy any
part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2005
All rights reserved.
Printed in the United States of America
Manual Revision 1.0
Release Date: December 2, 2005
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of
the H8DSR-8/H8DSR-i serverboard. The H8DSR-8/H8DSR-i is based on the
ServerWorks HT-2000/1000 chipset and supports single or dual AMD Opteron
processors (single or dual core) in 940-pin microPGA ZIF sockets and up to 32 GB
of DDR266/200 or 16 GB of DDR333/400.
Please refer to the serverboard specifications pages on our web site for updates
on supported processors. This product is intended to be professionally installed.
Manual Organization
Chapter 1 includes a checklist of what should be included in your serverboard
box, describes the features, specifications and performance of the serverboard and
provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices. Read this
chapter when installing the processor(s) and memory modules and when installing
the serverboard in a chassis. Also refer to this chapter to connect the floppy and
hard disk drives, the serial ports, the mouse and keyboard and the twisted wires
for the power and reset buttons and the system LEDs.
If you encounter any problems, see Chapter 3, which describes troubleshooting
procedures for the video, the memory and the setup configuration stored in CMOS.
For quick reference, a general FAQ (Frequently Asked Questions) section is pro-
vided. Instructions are also included for contacting technical support. In addition,
you can visit our web site for more detailed information.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Code Messages.
Appendix B lists BIOS POST Checkpoint Codes.
Preface
iii
H8DSR-8/H8DSR-i User’s Manual
Table of Contents
Preface
About This Manual ...................................................................................................... iii
Manual Organization ................................................................................................... iii
Chapter 1: Introduction
1-1 Overview ......................................................................................................... 1-1
Checklist .................................................................................................... 1-1
H8DSR-8/H8DSR-i Image ........................................................................ 1-3
H8DSR-8/H8DSR-i Serverboard Layout .................................................. 1-4
H8DSR-8/H8DSR-i Quick Reference ....................................................... 1-5
Serverboard Features .............................................................................. 1-6
ServerWorks HT-2000/1000 Chipset: System Block Diagram ................. 1-8
1-2 Chipset Overview ........................................................................................... 1-9
1-3 PC Health Monitoring ................................................................................... 1-10
1-4 Power Configuration Settings ....................................................................... 1-11
1-5 Power Supply ............................................................................................... 1-12
1-6 Super I/O ....................................................................................................... 1-13
Chapter 2: Installation
2-1 Static-Sensitive Devices ................................................................................. 2-1
2-2 Processor and Heatsink Installation ............................................................... 2-2
2-3 Mounting the Serverboard into a Chassis ...................................................... 2-4
2-4 Installing Memory ........................................................................................... 2-4
2-5 I/O Port and Control Panel Connections ........................................................ 2-7
2-6 Connecting Cables ......................................................................................... 2-8
Primary ATX Power Connector ............................................................... 2-8
Processor Power Connector .................................................................... 2-8
Secondary Power Connector .................................................................... 2-8
NMI Button ............................................................................................... 2-8
Power LED ............................................................................................... 2-9
HDD LED ................................................................................................ 2-9
NIC1 LED ................................................................................................. 2-9
NIC2 LED ................................................................................................. 2-9
Overheat/Fan Fail LED ............................................................................ 2-9
Power Fail LED ...................................................................................... 2-10
Reset Button .......................................................................................... 2-10
Power Button .......................................................................................... 2-10
iv
v
USB0/1 (Universal Serial Bus Ports) ..................................................... 2-10
USB2/3 Headers .................................................................................... 2-11
Serial Ports ............................................................................................. 2-11
Fan Headers .......................................................................................... 2-11
Overheat LED ........................................................................................ 2-11
Power LED/Speaker ............................................................................... 2-12
JLAN1/2 (Ethernet Ports) ....................................................................... 2-12
IPMB Header .......................................................................................... 2-12
SMB Power ............................................................................................ 2-12
Overheat LED ........................................................................................ 2-13
Wake-On-Ring ........................................................................................ 2-13
Wake-On-LAN ........................................................................................ 2-13
Chassis Intrusion .................................................................................... 2-13
JSLED .................................................................................................... 2-13
2-7 Jumper Settings ............................................................................................ 2-14
Explanation of Jumpers ......................................................................... 2-14
CMOS Clear ........................................................................................... 2-14
PCI-X Slot Frequency Select ................................................................. 2-15
Onboard Speaker Enable/Disable ......................................................... 2-15
Watch Dog Enable/Disable .................................................................... 2-15
SCSI Controller Enable/Disable ............................................................. 2-16
SCSI Termination Enable/Disable .......................................................... 2-16
VGA Enable/Disable ............................................................................... 2-16
Power Force On ..................................................................................... 2-16
I2C to PCI Enable/Disable ...................................................................... 2-17
2-8 Onboard Indicators ....................................................................................... 2-17
JLAN1/2 LEDs ........................................................................................ 2-17
+3.3V Power LED .................................................................................. 2-17
SCSI Activity LEDs ................................................................................. 2-18
POST Code LEDs .................................................................................. 2-18
2-9 Floppy, IDE, SCSI and SATA Drive Connections ......................................... 2-19
Floppy Connector ................................................................................... 2-19
IDE Connector ........................................................................................ 2-20
SCSI Connectors ................................................................................... 2-21
SATA Connectors ................................................................................... 2-22
Chapter 3: Troubleshooting
3-1 Troubleshooting Procedures ........................................................................... 3-1
Before Power On ..................................................................................... 3-1
Table of Contents
H8DSP-8/H8DSP-i User’s Manual
No Power ................................................................................................. 3-1
No Video .................................................................................................. 3-1
Memory Errors ......................................................................................... 3-2
Losing the System’s Setup Configuration ................................................ 3-2
3-2 Technical Support Procedures ....................................................................... 3-2
3-3 Frequently Asked Questions .......................................................................... 3-3
3-4 Returning Merchandise for Service ................................................................ 3-4
Chapter 4: BIOS
4-1 Introduction ..................................................................................................... 4-1
4-2 Main Setup ..................................................................................................... 4-2
4-3 Advanced Settings Menu ............................................................................... 4-2
4-4 Boot Menu .................................................................................................... 4-14
4-5 Security Menu ............................................................................................... 4-16
4-6 Exit Menu ...................................................................................................... 4-16
Appendices:
Appendix A: BIOS Error Beep Codes ...................................................................... A-1
Appendix B: BIOS POST Checkpoint Codes .......................................................... B-1
vi
Chapter 1: Introduction
1-1
Chapter 1
Introduction
1-1 Overview
Checklist
Congratulations on purchasing your computer serverboard from an acknowledged
leader in the industry. Our boards are designed with the utmost attention to detail
to provide you with the highest standards in quality and performance.
Please check that the following items have all been included with your serverboard.
If anything listed here is damaged or missing, contact your retailer.
One (1) H8DSR-8 or H8DSR-i serverboard
One (1) IDE cable (CBL-036)
One (1) floppy cable (CBL-022)
One (1) CD containing drivers, utilities and user's manual
Optional:
Two (2) 1U passive heatsinks (SNK-P0012)
Two (2) CPU backplates (BKT-0004)
Two (2) heatsink retention modules (BKT-0005)
1-2
H8DSR-8/H8DSR-i User’s Manual
Notes
Chapter 1: Introduction
1-3
Figure 1-1. H8DSR-8/H8DSR-i Image
Note: the H8DSR-8 is pictured. The H8DSR-i shares the same layout but without
SCSI controllers, jumpers or connectors.
1-4
H8DSR-8/H8DSR-i User’s Manual
Notes:
Jumpers not indicated are for test purposes only.
The H8DSR-i shares the same layout but without SCSI controllers, jumpers or con-
nectors.
Figure 1-2. H8DSR-8/H8DSR-i Serverboard Layout
(not drawn to scale)
Battery JBT1
Mouse
U320 SCSI CHB VGA
KB
COM1
LAN2 LAN1 USB0/1
BIOS
1UIPMI
JWOR
JWD
Speaker
Rage
XL
JPG1
JI2C1
J22
PCI #6: 100 MHz PCI-X ZCR
PCI #7: 133 MHz PCI-X
AIC-7902W
JPA1
JPA2
JPA3
HT-1000
U320 SCSI CHA
PCI-Express x8
PCI-Express x8
SATA0 JIDE1
JFDD1
CPU2 DIMM 1B
CPU2 DIMM 1A
CPU2 DIMM 2B
CPU2 DIMM 1A
JD1
JF1
CPU1
HT-2000
USB2/3
JP17
JWF1
J1B4
JPW2
FAN4
FAN5
JL1
JPXAO
JPXBO
JA1
DP1
COM2
JSLED1
JWOL
DA2
DA1
DB8/7/6/5/4/3/2/1
JPF
SATA1SATA2SATA3
CPU1 DIMM 2A
CPU1 DIMM 2B
CPU1 DIMM 1A
CPU1 DIMM 1B
CPU2
FAN3 FAN2 FAN1
J32
JI2C2
JOH1
IPMB
J3P
JAR
JP10
J24
JB1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Supero Scheda server
Supero
Supero H8QGL-6F Manuale utente
Supero
Supero H8DA3-2 Manuale utente
Supero
Supero H8DCT-F Manuale utente
Supero
Supero H8QI6-F Manuale utente
Supero
Supero H8SMU Manuale utente
Supero
Supero H8QM3-2+ Manuale utente
Supero
Supero SUPERSERVER 8047R-TRF+ Manuale utente
Supero
Supero H8DCT-HLN4F Manuale utente
Supero
Supero H8DA8-2 Manuale utente
