Supra TRACcess DisplayKEY Manuale utente

TRACcess®DisplayKEY

Quick Guide

www.traccessmanager.com

Downloads and Resources

Pour consulter ce guide en français, allez à…

Para ver esta guía en español, ir a…

Die deutsche Version dieser Anleitung nden Sie unter....

Per consultare questa guida in Italiano, andare a…

Para visualizar este guia em português, acesse...

DisplayKEY

enter

456

78 9

10103465P1, Rev G, EN

Technologies Corporation.

Disclaimer

This document discloses subject matter in which UTC Climate, Controls & Security has proprietary rights. Neither receipt nor possession

thereof confers or transfers any right to reproduce or disclose the document, any part thereof, any information contained therein, or

any physical article or device, or to practice any method or process, except by written permission from, or written agreement with, UTC

Climate, Controls & Security. The information in this document is subject to change without notice. United Technologies Corporation

assumes no responsibility for inaccuracies or omissions and specically disclaims any liabilities, losses, or risks, personal or otherwise,

incurred as a consequence, directly or indirectly, of the use or application of any of the contents of this document. For the latest

documentation, contact Supra or visit us online at www.traccessmanager.com.

This publication may contain examples of screen captures and reports used in daily operations. Examples may include ctitious names

of individuals and companies. Any similarity to names and address of actual businesses or persons is entirely coincidental.

Trademarks and patents

Supra and TRACcess are trademarks of UTC. Other brand and product names are or may be trademarks of, and are used to identify

products or services of, their respective owners.

Intended use

Use this product only for the purpose it was designed for. For the latest product information, contact Supra or visit us online at

www.traccessmanager.com.

Table of Contents

Quick Start............................................................................................................1

DisplayKEY Buttons ......................................................................................................................... 1

Connect Cradle ................................................................................................................................. 1

Perform an eSync ............................................................................................................................. 1

Battery Status ................................................................................................................................... 1

Enter an Access Code ...................................................................................................................... 2

Obtain and Enter Update Code........................................................................................................ 2

Open Device .........................................................................................................2

DisplayKEY Menu Options............................................................................................................... 2

Basic Start Up ................................................................................................................................... 2

USB Cradle Installation Instructions..................................................................3

System Requirements...................................................................................................................... 3

Install Software and Connect Cradle .............................................................................................. 3

Modify the DNS ................................................................................................................................. 4

Manual eSync.................................................................................................................................... 5

Multiple USB Cradles ....................................................................................................................... 5

Use the DisplayKEY USB Cradle..................................................................................................... 5

Internet Conguration...................................................................................................................... 5

Regulatory Compliance.................................................................................................................... 6

Quick Start

DisplayKEY Buttons

The DisplayKEY electronic key works with the Supra®TRACcess® Manager system. Each DisplayKEY has a 4-digit PIN

code that allows authorized users to access TRACcess devices. The DisplayKEY functions are supported in six (6) different

languages: English, French, Spanish, German, Italian, and Portuguese.

enter Turns the key on, selects a menu option, or accepts a code. Press enter a second time and hold

for 2 seconds to turn on the backlight.

Up and Down arrows Scroll up and down throught the menu.

enter + 1 Exit from a function or submenu.

Connect Cradle

The software must be loaded on the computer before connecting the cradle. The DisplayKEY cradle charges and updates

the DisplayKEY. The light on the front of the cradle is green when the DisplayKEY is connected and charging, amber

when the DisplayKEY and cradle are communicating, and red when an eSync is occurring.

USB Cradle

Go to the “USB Cradle Installation Instructions” on page 3 and follow the instructions to install and connect the DisplayKEY

cradle software.

Analog Cradle

Step Action

Note: The cradle can act as a splitter. Plug the phone cord from the telephone into the open port on the back of the cradle.

1. Insert one end of the provided phone cord into one of the two phone ports on the back of the cradle.

2. Insert the other end of the phone cord into an open analog phone line.

3. Insert the provided AC adapter into the AC connector and plug the cradle into an electrical outlet.

Perform an eSync

There are two (2) different ways to perform an eSync. The eSync is complete when the KEY UPDATED status is displayed.

• Automatic eSync - place the DisplayKEY on the cradle before midnight each night. Important! The cradle must

be connected to a power source and either an open Internet connection or open phone line.

• Manual eSync - an eSync performed at any time to update the DisplayKEY.

Step Action

1. Press enter to turn on the DisplayKEY.

2. Press the arrow buttons to scroll to the MANUAL ESYNC menu option and press enter.

3. Place the DisplayKEY in the cradle.

Battery Status

Step Action

1. Press enter to turn on the DisplayKEY.

2. Scroll to the BATTERY STATUS menu option and press enter.

Enter an Access Code

To access the TRACcess device, obtain an access code from the system administrator and enter it into the DisplayKEY.

Step Action

1. On the DisplayKEY, press enter to turn it on.

2. Scroll to the INPUT UPDATE OR ACCESS CODE menu option and press enter.

3. Press 2to select ACCESS CODE.

4. Enter the access code and press enter.

Obtain and Enter Update Code

Before the DisplayKEY eSync is required you can obtain a one-time emergency update code.

Step Action

1. For the Americas, call 1-888-968-4032.

2. When prompted, enter into the phone keypad the DisplayKEY serial number and PIN code and press the # sign.

3. Press 1 on the phone for an update code.

4. On the DisplayKEY, press enter to turn it on.

5. Scroll to the INPUT UPDATE OR ACCESS CODE menu option and press enter.

6. Enter the update code and press enter.

Open Device

Bluetooth® devices use the infrared interface to communicate with the DisplayKEY and do not need to place the key in the

device bezel to operate.

• For Bluetooth devices, turn on the device (if required) and aim the DisplayKEY at its infrared port.

• For classic TRACcess devices, insert the DisplayKEY into the bezel on the device.

DisplayKEY Menu Options

- OPEN DEVICE - READ DEVICE - ERROR CODES - SELECT LANGUAGE

- INPUT UPDATE OR ACCESS CODE - REVIEW MESSAGES - BATTERY STATUS - MANUAL ESYNC

- RELEASE SHACKLE - ESYNC PHONE # - VIEW LAST ENTRY

Basic Start Up

To reset the DisplayKEY press enter and the number 1 at the same time.

Step Action

1. Press enter to turn on the DisplayKEY.

2. Scroll to the OPEN DEVICE option and press enter.

3. Enter the 4-digit PIN code and press enter.

Open TRAC-Box BT Smart & TRAC-Lock BT Smart (including TRAC-Lock with Alarm Interface)

Step Action

1. Press the button on the device to turn it on, if required.

2. Aim the DisplayKEY at the device infrared port.

Open and Close a TRAC-Lid BT Smart

Step Action

1. Press the button on the device to turn it on.

2. When the light ashes, move the thumb lever counter-clockwise 90° until it stops.

3. Grasp the TRAC-Lid by its sides and pull to remove.

4. To close, place the TRAC-Lid in the TRAC-Vault and turn the thumb lever clockwise 90° until it stops.

Open and Close a Classic TRAC-Lid

Step Action

1. Move the thumb lever counter-clockwise 180° to a horizontal position with the at side down.

2. Grasp the TRAC-Lid by its sides and pull to remove.

3. To close, place the TRAC-Lid in the TRAC-Vault and turn the thumb lever clockwise 180° until the flat side is vertical.

View Last Entry

If the keys are missing after opening a device, display the last time the device was accessed with View Last Entry.

Step Action

1. Press enter to turn on the DisplayKEY.

2. Scroll to the VIEW LAST ENTRY menu option and press enter.

3. Press enter to view the company name and phone number.

USB Cradle Installation Instructions

First, verify the computer system meets the requirements listed below. Second, install the DisplayKEY USB cradle software

drivers onto the computer before connecting the cradle to the computer.

System Requirements

Before installing the software, make sure the system meets the following requirements:

• Windows® 10 operating system (64-bit), Windows 8, Windows 7, Windows XP, Windows Vista, or Windows 2000

Professional (all platforms 32-bit or 64-bit unless otherwise noted)

• 15 MB of free disk space

• Available USB port

• Open Internet connection

RESET

Install Software and Connect Cradle

Navigate to www.traccessmanager.com to download the

DisplayKEY USB cradle software, and select Downloads and

Resources. Select the download for your computer. The

application is based on the default language of the computer’s

Operating System (OS), if supported.

Note: With Windows 10, 8, 7, and Vista, disable the User

Account Controls. Windows XP users may encounter one or

more Installation Warning messages during the installation.

Click Continue Anyway if you encounter this message.

Step Action

1. Depending on the computer system, select DisplayKEY Cradle USB Software 32-bit or DisplayKEY Cradle

USB Software 64-bit link.

2. When prompted by the install wizard to set up the cradle, use the provided USB cable to connect the cradle to

an open USB port on the computer.

3. Follow the onscreen instructions.

• If prompted to perform a Windows update to search for the software, select Yes, this time only then click Next.

• On the next screen, select Install automatically and click Next to complete the installation.

4. Click OK in the DisplayKEY USB Cradle Finder window to complete the cradle installation.

Modify the DNS

This section is applicable to customers who are required to change their Domain Name Server (DNS) setting. The

organization’s system administrator will provide the keyholder with the specic DNS information.

Step Action

1. Right click on the Supra icon in the lower right corner of the computer screen and select Restore.

2. Select Edit Settings.

3. In the DisplyKEY eSYNC Settings pop-up window, select Proxy Settings.

4. Select Use Internet Explorer Settings and OK.

5. Select DNS Settings.

6. Enter the IP server address to your database or server.

7. Select the OK button.

Manual eSync

Perform a manual eSync to verify that the installation was successful.

Step Action

1. Press the enter button to turn on the DisplayKEY.

2. Scroll to MANUAL ESYNC and press enter.

3. Place the DisplayKEY in the cradle.

Note: Entering the 4-digit PIN code is a one-time step per computer. If the PC Sync Application is re-installed, the 4-digit

PIN code will have to be re-entered.

4. When prompted on the computer, type in the 4-digit PIN code.

Multiple USB Cradles

Depending on the USB port availability, up to ve (5) DisplayKEY USB cradles can be connected to a computer at one time.

To add an additional cradle to a computer after the initial installation, follow the instructions in ““Install Software and Connect

Cradle” on page 3, step 4.

After Windows installs the driver for the cradle, select Start > Programs > Supra > USB Cradle Finder and follow the

onscreen instructions.

Use the DisplayKEY USB Cradle

After a successfully manual eSync is performed, the cradle is ready for the DisplayKEY to eSync automatically each night

through your Internet connection.

For the DisplayKEY to perform the automatic update, the computer must be on and have a live Internet connection. You do

not need to be logged on. If the computer is in Sleep/Standby or Hibernation mode an eSync will not occur.

Do not disconnect the cradle from the computer while the DisplayKEY is performing an eSync. It is safe to disconnect the

cradle at any other time.

Internet Conguration

The cradle software automatically detects and uses a proxy server during the eSync process. If unable to eSync due to

server connection failures, you may need to change the Internet connection settings.

To change the Internet connection settings, double click the Supra icon in the lower right corner of the computer screen

to open the DisplayKEY eSYNC Info window, then click Edit Settings. For assistance, contact the Support Team at

1-877-699-6787.

Regulatory Compliance

RoHS compliant products are available in some countries.

United States (FCC)

This device complies with part 15 of the FCC rules. Operation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

Canada (IC)

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

European Union (CE)

This Class B digital apparatus conforms to the requirements of the following EU directives:

1. R&TTE Directive (1999/5/EC)

2. WEEE Directive (2002/96/EC)

Australia / New Zealand

This apparatus fully complies with ACMA requirements and is C-Tick marked.

Indice

Altri manuali Supra Sistema di interfono

Supra

Supra KeyAdvantage Manuale utente

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente