EX-SDI / HD-SDI / CVBS
Mini Square Camera
OPERATION MANUAL
Thank you for choosing our high quality camera. Before attempting to connect
operate this unit,please read and follow these instructions.
M365-HMS8130-001 CONTENTS
1. NOTICES
2. FOR YOUR SAFETY
3. FEATURES
4. COMPONENTS
5. DIMENSIONS
6. CAMERA MOUNTING POSITION
7. CONNECTION
8. SPECIFICATION
9. OSD MENU STRUCTURE
10. HIDDEN MENU
These servicing instructions are for use by qualied service personnel only.
To reduce the risk of electric shock do not per form any servicing other than
that contained in the operating instructions unless you are qualied to do so.
Use Class 2 Power Supply Only
CAUTION
1. NOTICES
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Note -
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Caution -
Any changes or modications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
1. A regulated DC12V 300mA power supply is recommended for use with this
camera to ensure the best picture quality and stable operation.
An unregulated power supply may cause damage to the camera.
Using an unregulated power supply will void the product warranty.
2. It is recommended that the camera is used with a monitor that has a CCTV
quality 75 video impedance level.
If your monitor is switched to high impedance, then please adjust accordingly.
3. Do not attempt to disassemble the camera to access internal components.
Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reective light, which
may cause smear on the picture and possible damage to the image sensor.
5. Do not remove the serial sticker for the warranty service.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature indicates that it should
not be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product or their local government oce for details of where and how to safely
recycle the item.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER(OR BACK).
NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFED SERVICE
PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sucient mangnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in
the literature accompanying the appliance.
2. FOR YOUR SAFETY
1) All warnings and instructions in this manual should be followed.
2) Save this manual for future reference.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
9) To help prevent electric shock, plug the equipment and peripheral power cables
into properly polarized or grounded electrical outlets. These cables are
equipped with the wide blade or the third prong to ensure proper grounding.
Do not use adapter plugs or remove the grounding prong from a cable. If the
provided plug does not t your outlet, consult an electrician.
10) Ensure that nothing rests on your equipment’s cables and that the cables are
not located where they can be stepped on, tripped over, or pinched.
11) Only use attachments or accessories as specied.
12) Only use the equipment with the cart, stand, tripod, bracket,
or table that is specied by the manufacturer or sold with the
apparatus. When a cart is used, use caution to prevent the cart
from tipping over and to avoid injury.
13) Do not connect or disconnect during lightning storms due to risk of electric shock.
14) If any of the following conditions occur, unplug the equipment from the
electrical outlet and replace the part or contact your trained service provider:
• The power cable, extension cable, or plug is damaged.
• An object has fallen into the equipment.
• The equipment has been exposed to water.
• The equipment has been dropped or damaged.
• The equipment does not operate correctly when you follow the operating
instructions.
3. FEATURES
• High resolution
1/2.8” SONY EXMOR R Progressive Scan CMOS
• Support various digital video output
1080p@30fps / 1080p@25fps / 720p@60fps / 720p@50fps / 720p@30fps / 720p@25fps
• EX-SDI (1.0_2.0_2.1) / HD-SDI Output is suitable for long reach transmission over
single coaxial cable.
Transmission Distance
HD-SDI : COLOR 150m (5C-HFBT)
EX-SDI 1.0 : COLOR 300m (5C-HFBT), EX-SDI 2.0 / 2.1 : COLOR 500m (5C-HFBT(A))
• True WDR (Wide Dynamic Range)
• Digital Zoom
• DSS (Digital Slow Shutter)
• HLC
• Motion Detection
• Privacy masking 16 zones
• RS-485
• 3DNR
• Option : Cable Joystick (OSD)
• Multi Language OSD menu
(ENGLISH / JAPANESE / RUSSIAN / SPANISH / GERMAN /FRANCE/ PORTUGUESE /
KOREAN)
4. COMPONENTS 5. DIMENSIONS
Unit(mm)
31
31
30
30
18.1
30
30
14
EX-SDI / HD-SDI
CONNECTOR
EX-SDI / HD-SDI
CONNECTOR
Square Camera
Mounting
Bracket
Screw 4ea M2 x 2.5
Tapping
3 x 8.0
Operation
Manual
DIY cable
