SV3C HX Series Manuale utente

US Email address info-us@sv3c.com

UK Email address: info-uk@sv3c.com

About Camera

Connect Camera

Add Camera via LAN cable

Add Camera without LAN Cable

Set Micro SD Card Recording

View on PC

Reboot and Restore Factory Setting

More Info

1.1 Product should contain:

IP Camera * 1 Power adapter * 1

User manual * 1 Network cable * 1

WiFi antenna * 1 Screws bag * 1

1.2 Product interface

1.3 How to fit Waterproof lid.

2.Connect Camera 3.Add Camera via LAN cable

2.1 Connect network cable to router and plug in power

adapter.

The router must be able to connect to the Internet!

Please use the standard power supply.

2.2 Connect LAN cable and power to camera, it needs

about one minute to self checking and then start

working.

Network indicator light (green): always flashing

means network data transmission is normal.

3.1 Download “CamHipro” from Google Play (Android Phone) /

App Store (iPhone) or scan the QR code below to get APP

information.

3.2 Add Camera

Please click “Device in use” to add a camera via UID

number if you have connected the camera on other

devices, UID is in this format ZZZZ-123456-ABCDE.

Pan up/ down/ left/ right button,

Only available for PTZ cam using!

8.Custom camera

name

3.3 Add a sharing device

Share camera, please click “Add a sharing device” to scan

camera UID QR code, then you can add the camera on a

different device.

3.4 View Camera

3.5 WI-FI Setting

1. WIFI Name (SSID) can not include special characters

such as @ # $ % & blank etc.

2. WIFI Password: length should be within 8-31 bits

and no special characters as well.

3. Dual Band WIFI router: camera only supports 2.4ghz

WIFI but not 5ghz. If you are using a dual band WIFI

router, please either disable 5ghz or set the WIFI

name be distinguishable for 2.4ghz and 5ghz so you

can choose different WIFI for different devices.

4. If you can not set up camera successfully by wired

connection way, please refer to “AP Mode Setting” (wifi

hot spot connection) on next page.

Note:

AP Mode Wifi Hotspot Connection

If it is not easy to connect LAN cable with the camera to setup

WiFi, or no available network port, please use AP mode to

connect and setup the camera as following:

1, please supply power for the camera, DO NOT connect

network cable.

2, reset camera: Long press the reset button which is next to

the power port for 8~15 seconds, then the camera will

start to reset.

3, please wait about 1 minute and run "CamHipro" APP to

connect the camera. Camera’s SSID in AP Mode is in a format:

IPCAM-XXXXXX. Please add the camera via AP mode as below.

(Default password: 01234567)

Note: If you still can not set up camera successfully,

please contact customer service as below:

US Email address:

UK Email address:

info-us@sv3c.com

info-uk@sv3c.com

4. Add Camera without LAN Cable

5.Set Micro SD Card Recording

5.1 SD Card Setting and Alarm Setting

1. Alarm push: Enable “Receive alarm push” if you need

text notification.

2. Humanoid Alarm: Please turn on “Motion detection alarm”,

“Humanoid Alarm”.

Linkage trigger: This function is triggered only when the camera

detects human form and is moving.

Alone Linkage: Can be triggered by People or other objects moving.

4.Adjust motion detection: Enable “Motion detection alarm” to make

motion detection work.

5.Motion detection alarm recording is recommended when the Micro

SD card is small.

3.Action with Alarm:

If you need motion detection recordings, enable “Alarm recording to

SD card” after format the SD card .

If you need Email alert with pictures, please enable “Alarm capture

sent to Email” , click “Configure Email” to complete Email settings,

for more detailed settings, please refer to the instruction on SV3C

website or contact SV3C customer service.

If you need to save motion detection recordings and pictures to FTP

server, please enable “Alarm recording to FTP” and “Alarm capture

saved to FTP”, click “Configure FTP” to complete FTP settings, please

refer to the FTP instruction on SV3C website.

Click “Adjust motion detection” to adjust the detection area and

sensitivity. Drag the frame to change the motion detection zone. You

can adjust the sensitivity from 1 to 50, 1 is the lowest setting. Select

“Easy setup”, if you need the motion detection work all days. Click

“advanced” button to set motion detection schedule for the camera.

5.2 Schedule Recording Setting

If you select “Easy setup”, the camera will record for 7/24

all days. Please click “advanced settings” to set recording

schedule for the camera.

5.3 Playback Record

5.4 Set Camera Time Zone

Note: When your time is DST(daylight saving time), please turn

on DST button, otherwise the recording time will beincorrect.

6.View on PC

6.1 Software Login

If you need to view the camera on PC, we recommend you

to use the HiP2P PC Client software.

Open HIP2P Client, click any one of the icons such as “ ”

then below Interface pop up, please click “OK” to log in

(Password is empty).

1. Click here to set

camera time zone

manually.

6.2 Add the camera on HiP2P PC Client software

6.3. Change the camera password

1. Click here

2.Click “Search”

4.First tick the UID

number and click

“Add”, add the cam

successfully.

3.UID number appears,

need to tick it.

1, Double click the

UID number, will

pop-up the right

setting page.

2.Change password here.

Default password is admin

Note: Please click “OK” after you enter the new

password. And must close the software, then open

it again, the new password will be updated.

6.4 Connect and manage multiple cameras at the same time

via P2P PC Client software on windows and MAC PC!

Please download the correct P2P PC Client software

for Windows and MAC PC on SV3C website:

https://sv3c.com/pc-software-hx-series-download/

Please confirm the camera and your computer are

connected with the same network , otherwise the

camera cannot be found successfully.

Any doubts about P2P function, pls contact customer

service as below:

US Email address:

UK Email address:

info-us@sv3c.com

info-uk@sv3c.com

7.Reboot and Restore Factory Setting

7.1 Reconnect the power to restart the camera.

7.2 Press and hold the reset button for 8-10 seconds

and the camera will restore to factory settings.

You can also restart or reset the camera via mobile phone

or PC.

8.More Info

This manual is to help customers to know and use the

camera quickly, For detailed instructions and video

tutorials please refer to SV3C website www.sv3c.com.

This manual may have descriptions and operations that

do not match the product, If you have any questions or

need technical support Please feel free to contact us.

US Email address: info-us@sv3c.com

UK Email address: info-uk@sv3c.com

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. Any Changes

or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

FCC Warning:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that

to which thereceiver is connected.

Altri manuali per HX Series

Indice

Altri manuali SV3C Macchina fotografica digitale

SV3C

SV3C CQ1-CG522 Manuale tecnico

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente