Swann Enforcer Manuale utente
Enforcer™ Bullet
Security Camera
4K Ultra HD for DVRs
Instruction Manual
Security Made Smarter
EN
Introduction
Congratulations on the purchase of your Swann En-
forcer Bullet Security Camera.
• 4K Ultra HD video with sensor spotlight, siren
plus red & blue flashing lights
• Microphone to stream live & record audio
• True Detect™ Heat & Motion sensing for reli-
able alerts
• Powerful Night2Day™ color night vision
• Works in rain & snow all year round
• Reliable BNC cable connection
Important instructions
1. Make sure the camera is secured correctly and
stable if fastened in place.
2. Only use the supplied power adapter (12V) and
power splitter (if included).
3. Do not operate if wires and terminals are exposed.
Please note: Have a look at the camera location tips
included with your DVR to select the best location for
your camera. The camera location tips provided here
are for general purposes only.
Please read: All jurisdictions have specific laws and
regulations relating to the use of cameras. Before
using any camera for any purpose, it is the buyer’s
responsibility to be aware of all applicable laws and
regulations that prohibit or limit the use of cameras.
1
For instructions on how to configure your camera
for motion detection, changing image settings,
and other functions available, please consult the
manual for your DVR. Go to support.swann.com,
search for your model, then download.
Connecting the Camera2
1. Connect the video output and pow-
er input connections on the camera
to the corresponding connectors on
the supplied video & power cable.
2. Connect the supplied power split-
ter to the power input on the video &
power cable (repeat this step if mul-
tiple cameras are included).
3. Connect the supplied power
adapter to the other end of the pow-
er splitter then connect the power
adapter to a spare wall socket.
4. Connect the video output on the
video & power cable to an available
camera input on your DVR. Twist the
connection to lock it in place.
For single camera packs, connect the supplied power adapter
directly to the power input on the video & power cable.
2 3
Twist to lock
connectors
Video Input
Video & Power Cable
Connect this to your DVR
Power Splitter
connects here
Power Output
Power Adapter
connects here
Power Splitter
Power Adapter
Video & Power Cable
connects here
Connect to a spare
power outlet
4
1
32
8 7 6 5
4 1
VIDEO INPUTVIDEO INPUT
AUDIO
INPUT
AUDIO
INPUT
3 1
4 2
VGAVGA
LANLAN 12V12V
RS485RS485
AUDIO
OUTPUT
AUDIO
OUTPUT
Power Input
Video Output
The camera can be mounted onto a flat surface using the screws and wall plugs provided. The flat surface must
have sufficient strength to hold the camera.
→ Position the camera in the location you want to mount it, and mark the screw holes on the surface to
position the screws (mounting template included). Then, using the appropriate screws for the flat surface
you’re fixing the camera to, secure the camera in place.
→ If you’re mounting to a wooden surface, screw the camera directly to the surface.
→ If you’re mounting to a masonry surface (bricks, concrete or similar), you’ll need to use wall plugs.
Mounting the Camera3
Aiming the camera
1. Loosen both screws (use a Phillips head screwdriver) to adjust the cam-
era’s orientation. This enables you to rotate the camera left or right so no
matter what direction or orientation it’s facing, your images will be the right
way up. Tighten each screw to secure it in place.
2. Loosen the screw to tilt the camera up or down. Tighten the screw to se-
cure it in place.
3. To pan the camera left or right, loosen the screw and position it according-
ly. Tighten the screw to secure it in place.
1
2
3
1. Take into consideration what you want to monitor
and where you’ll get the best view of it.
2. How you’re going to connect the camera to your
monitoring system; remember that cables and con-
nections should be kept out of the weather.
3. How to keep the camera out of harm’s way. We
recommended mounting your camera at an elevated
position.
4. Place your camera as close to the area of inter-
est as practicable. The best position is from about
13ft/4m above looking slightly down, keeping in mind
the details you are looking for.
5. Although the sky looks nice when you look at the
live view from your camera, it is an unlikely direction
for an offender to approach. Make sure your camera
has minimal sky in it as the light in daylight can make
the foreground of the image darker.
6. Think about the most likely way a potential offend-
er may approach your home, use your camera to give
you the best coverage of these areas.
7. The camera’s casing is resistant to different weath-
er conditions and tampering. It would take an over-
whelming event to damage the housing.
8. The camera is weather and water-resistant but,
prolonged exposure to adverse weather conditions
such as sunlight and excessive moisture can damage
the internal components.
9. Run cables inside a wall cavity or other protected
enclosure, and ensure that all wiring and connectors
are insulated and protected from moisture.
10. Don’t put your cable near live electrical wiring. AC
electricity generates radio noise, which can interfere
with the signal from your camera.
Camera Location Tips4
M4KMQBREV1E | © Swann 2022
Helpdesk & Resources
Security Made Smarter
Visit Swann Support Center at support.swann.com. You can register
your product for dedicated customer support, download guides, find
answers to commonly asked questions, and more.
Product Registration Customer Support
Product Manuals Frequently Asked Questions
Support Community
Altri manuali per Enforcer
1
Indice
Altri manuali Swann Telecamera di sicurezza
Swann
Swann StyleCam SW211-STY Manuale utente
Swann
Swann 3MP Manuale utente
Swann
Swann SW-P-HSK Manuale utente
Swann
Swann SW-C-C510R Manuale utente
Swann
Swann SW-C-DPCC Manuale utente
Swann
Swann SwannCloud ADS-446 Manuale utente
Swann
Swann Enforcer NHD-900BE Manuale utente
Swann
Swann C-480R Manuale utente
Swann
Swann SWA31-C6 Manuale utente
Swann
Swann BulldogCam SW224-BDC Manuale utente
Swann
Swann Night Hawk Camera Pack Manuale utente
Swann
Swann DIY Security Cam Manuale utente
Swann
Swann 1080p SDI Manuale utente
Swann
Swann SHD860 Manuale utente
Swann
Swann PRO-720 Manuale utente
Swann
Swann SWIFI-SLMFLCW-AU Manuale utente
Swann
Swann ADW-300 Manuale utente
Swann
Swann 700TVL Manuale utente
Swann
Swann PRO-640 Manuale utente
Swann
Swann SW231-WMX Manuale utente
