Swann DVR4-Pro-Net TBA Guida rapida

Connect Yellow RCA

cables together

Audio

Tune Monitor to

AV1using controls

Connect Mini Jack to

right side of montior

Connect BNC end to

Monitor on DVR

2. Connect extension cables

to camera inputs on back

of DVR

4. Plug in DVR Power

& Camera Power

Camera Power Splitter

SPARE

Camera 2 Camera 3 Camera 4

1. Connect Camera cables

to Extension Cables x 4

3. Connect Power end of

Extension Cable to

Camera Power Splitter

Camera

Power Supply

DVR

Power Supply

Camera 1

Connecting the Monitor to DVR

Back of DVR

Right side of Monitor

Package Contents

Packaging

Manual

Power Cable for

DVR Power Supply

Security

Stickers

BNC to

RCA Cable

Ethernet

Cable

Extension Cables x 4

4 x Maxi Day/Night

Cameras

Camera Power

Supply

DVR Unit

Camera Power

Splitter

DVR Power

Supply

Software CD

DVR4 - PRO-NET, 4 Camera & LCD

Easy Setup Guide

www.swannsecurity.comSwann Communications • Toll Free Technical Support: USA - 1-800-627-2799, 1-877-274-3695, Australia - 1300 13 8324 • Email: [email protected]

DVR & Camera Connections

8” Monitor and

Remote

Monitor Power

Supply

Remote Viewing Setup Guide

This is a general setup guide for preparing the DVR for viewing over a network/inernet. This guide will assume a common setup for PC or MAC, connected to a router/modem which is

connected to the internet. If the general router settings below differ from yours, contact your router manufacturer or visit www.portforward.com for more specific information

Explorer or Safari. In our example this is 192.168.1.1 another

common gateway is 10.1.1.1

For most Linksys routers you will find Port Forwarding options

in “Applications & Gaming” under “Port Range Forward”

Connect the Ethernet Cable from the back of the DVR into your Router Press the MENU button and go to ADVANCE and then NETWORK Set the NETWORK TYPE to DHCP. Restart the DVR and go back to the

NETWORK settings. The DNS is the IP address assigned to your DVR

For some D-Link routers, port forwarding

can be found under “Advanced” > “Virtual

Server” Make a rule for port 80 and ensure

“Port Start, End, Map” are set to 80. Save

the rule and apply it to the IP address of the

DVR, i.e. 192.168.1.4 in our example

Create an entry for the DVR port to be forwarded. By default, the DVR is set to port 80. Create

a name in “Application” such as “DVR1”. Start and End ports must be set to 80. The IP address

will be the IP address given to your DVR as in step 3. Do not forward the port in a range

To login remotely we will need to find your internet IP

address. You can find this at www.whatismyip.com This

will NOT be the same as your IP address or Default

Gateway in step 3

Finally, back in Internet Explorer/Safari - type in

your IP address found in step 6. Your IP will be

different from the above. Follow the prompts

to automatically download and login to the DVR

If you are unfamiliar with networking or forwarding ports

we recommend you contact your router manufacturer or

internet provider as router options and features vary by

model. The following are general steps for the most

common routers

Your IP Address Is ***.***.***.***

5a 6 7

NOTE:

www.swannsecurity.comSwann Communications • Toll Free Technical Support: USA - 1-800-627-2799,1-877-274-3695, Australia - 1300 13 8324 • Email: [email protected]

DVR4 - PRO-NET, 4 Camera & LCD

Easy Setup Guide

Altri manuali per DVR4-Pro-Net TBA

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Swann Sistema di sicurezza