SWELLPRO S3 Manuale utente
S3 Goggles
www.swellpro.com
Operation manual
01
02
03
04
04
05
07
07
08
08
11
11
11
12
Contents
Packing list
Product llustration
Product Overview
Quick Start Steps
Buttons
Manual Frequency Selection
Automatic Frequency Search
Video Playback
System Settings
Battery Status Indications
Channel list
Charging for rechargeable battery
Specifications
Contents
FPV Glasses S3 X1
Power cord X1
Foam Nose Piece sX 1
7.4v 1800mah Lipo Charging Battery X1
3.7v 1500mah Lipo Goggle Battery X1
Packing list
5.8G antennaX2
Instructions X1
Product llustration
[6]
[1]
[6]
[15]
[3]
[14]
[13]
[11]
[12]
[4]
[5]
[2]
[7]
[8]
[9] [10]
[1] Band / Volume increase (+)
[2] Channel/ Volume decrease (-)
[3] Power button/ Menu
[4] Video
[5] Search
[6] Antenna Connector
[7] F/SD card slot
[8] Micro USB interface
[9] Right pupillary distance
adjustment
[10] Left pupillary distance
adjustment
[11] DC Charging port
[12] Charging indicator
[13] Video input/ output
[14] Headphone jack
[15] Battery cover
SwellPro FPV Goggle Glasses S3 provide a lightweight, powerful and immersive
First-Person-View (FPV) experience. Ergonomically comfortable to wear, adjustable and with
dual LCD screens, they provide real-time video from your drone as well as allowing you to record
your mission. Dual receiver technology helps ensure a stable and fast video connection. Your
Goggle Glasses S3 will make you feel all the excitement of your drone flight – as if you were in
the cockpit!
1. nstall antennas and storage card.
2. If the inbuilt lithium battery is low [e] or the display flashes, use the supplied 2S charging
battery to charge the S3 Goggles.
3. Press and hold the power button for 3 seconds to power up the Goggles.
4. Adjust the straps of the goggles and the pupillary distance to suit your face for the best and
sharpest picture. It may be necessary to tighten or loosen the straps to see the display in focus.
Every face is different, so experiment with the position of the goggles on your face to find the
optimum position.
5. With your drone transmitting its FPV, briefly press the auto channel search button [5]. Repeat
this process until the goggles lock onto your drone’s video signal and provide the best picture.
Preview interface Playback interface
Product Overview
Quick Start Steps
OSD (On Screen Display)
[a]
[f] [g] [h] [ j] [n]
[p]
[b] [c] [e] [k] [m][d]
00: 01: 12
00: 01: 12
00: 01: 05
004
25. 16G
RF RBAND: E CH: 1 5705MHz
x4 25. 16G
[a] Video recording status: Blue indicates view only, red indicates received video is being
recorded to the TF/SD card.
[b] Video timer: Hour: Minute: Second.
[c] TF/SD card status: Blue indicates good card status, Red indicates no TF/SD card detected or
that the card needs to be reformatted.
[d] TF/SD card remaining capacity
[e] Internal battery charge level
[f] Receiver: RF R – signal is being processed from the right-hand receiver. RF L – signal is being
processed from the left-hand receiver.
[g] BAND: the current working band of the receiver, the working bands A – F should match the
transmission band of your drone’s transmitter.
[h] CH: the current channel of the receiver, there are eight channels per Band.
[j] 5705MHz: displays the current working frequency of the receiver
[k] current video playback speed
[m] name of the video currently playing.
[n] duration of the playing video in hours:minutes:seconds.
[p] current video playback point in hours:minutes:seconds.
[1] BAND button
• RF (FPV) mode: briefly press the BAND button to cycle the Bands A-F
• All modes: press and hold the BAND button to increase volume.
• Menu mode: briefly press the BAND button to go up or increase a value.
[2] CH button
• RF (FPV) mode: briefly press the CH button to cycle the Channel 1-8
• All modes: press and hold the CH button to decrease volume.
• Menu mode: briefly press the CH button to go down or decrease a value.
Buttons
[3] button
• Power ON/OFF: Press and hold for 3 seconds to turn the goggles ON or OFF.
• MENU mode: briefly press the button to open the System Settings menu.
• PLAYBACK mode: briefly press the button to pop up the "File Del, Push OK" dialog
box, then press the SEARCH button [5] to confirm the deletion of the current video file.
[5] SEARCH button
• RF (FPV) mode: briefly press the SEARCH button [5] to automatically search for an FPV signal
from your drone. The screen will display the search progress and the Band and channels being
scanned. When the search is complete, the screen will display the current channel information.
If the scan has not selected the best channel for your drone, briefly press the button again to
continue searching until the correct channel is displayed and the picture from your drone is
clearly received. If a strong signal is not found after searching all channels, the receiver will stop
searching.
• MENU mode: briefly press the SEARCH button [5] to confirm a menu selection
[4] M button
• Switch modes: briefly press the M button [4] to switch between RF(FPV), AV-IN and PLAYBACK
modes.
• RF (FPV) or AV-IN mode: press and hold the M button [4] to start recording. Press the M button
again to stop the recording
• MENU mode: briefly press the M [4] button to return to the previous item.
If the exact channel of your transmitter is known,
in RF (FPV) mode, use the BAND [1] and CH [2]
buttons to select the matching channel .
If the exact channel your drone transmits its FPV
signal is unknown, then in RF (FPV) mode, briefly
press the SEARCH button [5] to automatically
search for an FPV signal from your drone. The
screen will display the search progress and the
bands and channels being scanned. When the
search is complete, the screen will display the
current channel information. If the scan has not
selected the best channel for your drone, briefly
press the button again to continue searching until
the correct channel is displayed and the picture
from your drone is clearly received. If a strong
signal is not found after searching all channels, the
receiver will stop searching.
Before recording video using your Goggle Glasses S3, we recommended formatting the TF/SD
card using the goggles. Follow the instructions in the Format SD Card section of this manual.
Recording your FPV
Video Recording and Playback
Manual Frequency Selection
Frequency interface
00: 01: 12 25. 16G
RF RBAND: E CH: 1 5705MHz
Automatic Frequency Search
Automatic search frequency interface
Search…
E/5
• To playback videos from the TF/SD card, switch modes to PLAYBACK by briefly press the M
button [4]. The Goggles will cycle between RF(FPV), AV-IN and PLAYBACK modes.
• Select file to play: briefly press BAND button or CH button to move backwards or forwards
through the recorded files
• To Play the file press the SEARCH button [5].
• During video playback, briefly press SEARCH button [5] to PAUSE video playback, briefly press
the button again to resume playback.
Fast Forward and Reverse Play
During playback, it is possible to play the video in forward or reverse at 2x, 4x and 8x normal
speed.
• Start the video playing with the SEARCH button [5].
• Briefly press the CH button [2] to play the video at 2x normal speed
• Briefly press the CH button [2] again to cycle the playback speed of the video 2x, 4x, 8x… 2x, 4x,
8x… Briefly press SEARCH button [5] to return to normal playback speed and before changing
playback direction
• To play the video in reverse, briefly press the BAND button [1] to play the video at 2x reverse
speed
• Briefly press the BAND button [1] again to cycle the reverse playback speed of the video 2x, 4x,
8x… 2x, 4x, 8x…
• Briefly press SEARCH button [5] to return to normal playback speed and before changing
playback direction
•Record Video: press and hold the M button [4] to start recording. Press the button again to stop
the recording
Video Playback
System Settings
Indice
