2021_032/2
Instructions for Use
Instructions for Use:
1. For height adjustment, push the clip off the leg, adjust to the correct height and then push the
clip back in. Make sure the clip is securly fastened before use. If an old clip is replaced with a
new one, check that it is the correct size.
2. Adjust the toilet seat so that all four legs are firmly on the ground by turning the adjustable leg
(white rubber tip). Please note that only the leg with the white rubber tip is adjustable. It is
allowed to switch places of the legs.
3. Apply the splash guard as instructed below.
4. Check the rubber tips before use. Damaged/worn rubber tips must be replaced with new ones.
5. If the shower chair is set in a slight forward-leaning position, the difference in height between
the front and rear legs may not exceed 5 cm, which corresponds to two steps on the height
adjustment.
6. The lid may not be used as a backrest.
Care Instrutions:Clean regularly and whenever necessary (at least once a week) with soap
solution, pH 5-9. When changing the user, the product must be disinfected and then autoclaved
at a maximum 85° for 3 minutes. Alternatively wipe it with 70% isopropanol.
Art nr 144750, Splash guard
Accessories:
Art nr 144785, Lidsupport
Art nr 144210, Soft seat
Art nr 144755, Bucket
Art nr 144760, Bucket w/ handle
Assembly of Art nr 144785, Lid support.
3144202_ENG
Spare parts:
Art. nr 120700, Rubber tip, grey
Art. nr 120701, Rubber tip, white
Art. nr 14420206, Toilet seat
Art. nr 14420213, Clip 25 mm Art.
nr 14420225-S, 4 legs incl clips
and rubbertips for EasyStack
Make sure the
lid support is
not mounted to
close to the end
of the armrest.
Attach the lid
support to
the armrests
Pull the chord
so that the
band sticks
out 2-3 cm.
