Swisscom WLAN-Box 3 Manuale utente

WLAN-Box 3

Step-by-step

instructions and

additional information

2These Internet-Boxes are compatible:

3Your Internet-Box must be switched on and

the WLAN activated. 4Always position the WLAN-Box 3 on its own.

For the best WLAN, place the WLAN-Box 3 in an upright

position away from other objects and metal casings.

1The package includes:

Ethernet cable

Power adapter

WLAN-Box 3

5a Cable connection:

Use the enclosed Ethernet cable or connect the

WLAN-Box 3 to your home cabling. Cable connections

between the Internet-Box and WLAN-Box 3 guarantee

optimum WLAN for your devices. Alternatively, you can link

your WLAN-Box 3 via WLAN (step 5b).

Internet-BoxInternet-Box

WLAN-Box

Ethernet cable

Room 3 WLAN-Box 3

WLAN-Box 3

Room 1

Room 2

Internet-Box

7Pairing: press the +button on the Internet-Box

and WLAN-Box 3 within 2 minutes.

Even if you connect the WLAN-Box 3 via Ethernet cable you

must still pair the devices using the +buttons.

Both +buttons then ﬂash white.

Your WLAN-Box 3 is now ready.

Example installation:

5 bWLAN connection: ﬁnd the best position.

The WLAN-Box 3 can be connected directly via WLAN:

install the WLAN-Box 3 halfway between your

Internet-Box and an area not covered by WLAN.

See also > page 4

Table of contents

Additional information

LED behaviour . . . . . . . . . . . . . . . . . . . page 3

Buttons and connections . . . . . . . . . . . page 3

WLAN-Box 3 setup . . . . . . . . . . . . . . . page 4

Connect devices via cable . . . . . . . . . . . page 4

What is pairing? . . . . . . . . . . . . . . . . . . page 5

My WLAN-Box 3 is not working . . . . . . . page 5

WLAN password . . . . . . . . . . . . . . . . . page 5

Online help . . . . . . . . . . . . . . . . . . . . . page 5

1 +button (connection button)

Pairing: connect your WLAN-Box 3 and Internet-Box

WPS: connect WLAN devices with the WLAN-Box 3

2 Status-LED

3 Ethernet cable port

4 On / Oﬀ (power)

5 Port for power adapter

6 Reset

LED behaviour

Status LED

LED lights up white – everything ok

LED ﬂashes white – Swisscom conﬁguration in

progress. Please wait for 5 minutes.

LED ﬂashes white and red alternately – device pairing

with the Internet-Box in progress.

Please wait for 2 minutes.

LED ﬂashes red – no connection to the Internet-Box

Either the WLAN-Box 3 is not paired (see «What is

pairing?») or it is too far away from the Internet-Box

(see «WLAN-Box 3 setup»).

LED pulses red – poor connection to the Internet-Box

Reposition the WLAN-Box 3. Please note the

«WLAN-Box 3 setup» tips.

LED lights up red – no connection to the Internet-Box

or error message

> Check if the Internet-Box WLAN is switched on.

> Perform pairing (see step 7).

> If the LED lights up red again, reboot the Internet-Box

and the WLAN-Box 3.

> If the LED still lights up red, position the WLAN-Box 3

closer to the Internet-Box.

> If no measure has helped, go to the chapter

«My WLAN-Box 3 is not working».

LED lights up blue – faulty WLAN-Box 3

Please contact Swisscom to exchange it.

Note: During start-up, the LED will go blue temporarily.

Wait 10 minutes until the start process is complete.

Pairing LED

LED ﬂashes white – the WLAN-Box 3 is in pairing mode.

Please wait for 2 minutes.

Buttons and connections

Connect your WLAN-Box 3 to the Internet-Box

If possible, use a cable to connect the WLAN-Box 3 to the

Internet-Box. Use the network ports in the rooms if available. In

the absence of network ports, you can install an Ethernet cable

(available from the Swisscom Shop).

If you use WLAN to connect the WLAN-Box 3 to the

Internet-Box, position the WLAN-Box 3 roughly halfway

between your Internet-Box and an area not covered by WLAN.

Your optimal WLAN network

The WLAN-Box 3 ensures an optimal WLAN network throughout

the entire house by means of «WLAN-Mesh». Your devices

(smartphones, tablets, etc.) are automatically connected to the

best WLAN signal - either to the Internet-Box or to a

WLAN-Box3, depending on your location. When you move

around the room, the best connection is always created

automatically.

Connect devices via

cable

You can connect up to 3 devices via Ethernet to the WLAN-Box 3.

We always recommend a direct cable connection between the

TV-Box and Internet-Box for Swisscom blue TV (in same room). If

this is not possible, please connect the TV-Box to the

WLAN-Box 3 with the enclosed Ethernet cable (if TV-Box and

Internet-Box are not in the same room or there are no network

connections in the rooms).

WLAN-Box 3 setup

(Extend your WLAN using 1-4 WLAN-Boxes 3.)

Tips for good WLAN

• Position the Internet-Box in a central location

• Place all devices in a free-standing position

• We recommend you use a cable to connect the WLAN-Box 3

WLAN-Box 3 positioning

The WLAN-Box 3 transmits the WLAN in all directions. You

should therefore position it as close to the centre of a room as

possible. Place the WLAN-Box in a free-standing position on

a piece of furniture, not in the direct vicinity of other objects

or metal casings. You will obtain better WLAN coverage if you

maintain a clearance of around 20 cm to walls and do not

position a WLAN-Box in the same room as the Internet-Box.

WLAN password

Where do I ﬁnd my WLAN name (SSID) and WLAN password?

• In app:

• In My Swisscom: swisscom.ch/login

• Also in the web portal: http://internetbox.home

of the Internet-Box > WLAN > Settings

If you do not know the password for the web portal

> «Set new password»

Online help

For more information enter:

swisscom.ch/wlan-box3

What is pairing?

Before you can use the WLAN-Box 3 in the desired position, you

have to connect (pair) it with the existing WLAN network. Once

they are paired, you can position WLAN-Boxes in your home

anywhere you like. You can connected paired WLAN-Boxes to the

Internet-Box via WLAN or Ethernet cable.

What to do: press both + buttons (Internet-Box and

WLAN-Box 3) within 2 minutes to automatically pair the

2 devices.

You can connect your WPS-ready devices with the WLAN at the

touch of a button, either with the Internet-Box or with a paired

WLAN-Box 3.

My WLAN-Box 3 is not

working

• Are you using an Internet-Box 2 (or newer) and is the WLAN

switched on? > step 3

• Is your WLAN-Box 3 switched on? > step 6

• Is your WLAN-Box 3 paired? (use buttons, not the web portal)

> step 7

• Does the status LED light up other than white?

> Monitor LED behaviour.

• Reboot the Internet-Box and WLAN-Box 3.

If the WLAN-Box 3 still doesn‘t work or you want to restore the

default settings, perform a reset and follow the instructions on

page 1 from step 5 onwards.

Swisscom (Switzerland) Ltd

Postfach

3050 Bern

swisscom.ch/internetbox-help

0800 800 800

B2C-TSP-UID 09/22 EN

Indice

Altri manuali Swisscom Ripetitore

Swisscom

Swisscom DECT/Rousseau Manuale utente

Manuali Ripetitore popolari di altre marche

Gigaset

Gigaset 108 Manuale utente

Ace TECHNOLOGY

Ace TECHNOLOGY USR-1900A Manuale utente

Kenwood

Kenwood TKR-750-850 Manuale elenco delle parti

Asus

Asus RP-AC51 Manuale utente

Exibel

Exibel HRP0101 Manuale utente

Kidde

Kidde Vega Manuale utente

Telcosat

Telcosat RBB 850 Guida all'installazione

York

York Universal LINC485 Manuale utente

MIKOM

MIKOM MRx01B Power Series Manuale utente

Simrad

Simrad RD 301 Manuale utente

Tait

Tait TB7304 Manuale utente

R-tron

R-tron RSN-CDMA-37-C Manuale utente

Inventronics

Inventronics DALI REPEATER SO Manuale utente

XFP

XFP 16 Manuale utente

Andrew

Andrew MRx18 Manuale utente

COMBA

COMBA RXA3748 Manuale utente

ADRF

ADRF SDR-ICS-43 Manuale utente

Teltonika

Teltonika WRP100 Manuale utente