SWIT FM-16B Manuale utente
Model: FM-16B
15.6" LCD Monitor
User Manual
Please read this user manual throughout before using
Ver：A
SWIT ELECTRONICS CO., LTD.
11
Preface
All internal technologies of this product are protected, including device, software and trademark.
Reproduction in whole or in part without written permission is prohibited.
All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks
in this user manual are the property of their respective owners.
Due to constant effort of product development, SWIT reserves the right to make changes and
improvements to the product described in this manual without prior notice.
The warranty period of this product is 2 years, and does not cover the following:
⑴ Physical damage to the surface of the products, including scratches, cracks or other damage
to the LCD screen or other externally exposed parts;
⑵ The LCD dot defects are not over three;
⑶ Any damage caused by using third-party power adaptors;
⑷ Any damage or breakdown caused by use, maintenance or storage not according to the user manual.
⑸ The product is disassembled by anyone other than an authorized service center.
⑹ Any damage or breakdown not caused by the product design, workmanship, or manufacturing
quality, etc.
＊ Any sales personnel have no rights to provide additional warranty.
For any suggestions and requirements on this product, please contact us through phone, fax,
Email, etc.
SWIT Electronics Co., Ltd.
Address: 10 Hengtong Road, Nanjing Economic and Technological Development Zone,
Nanjing 210038, P.R.China
Phone: +86-25-85805753
Fax: +86-25-85805296
Email: contact@swit.cc
http://www.swit.cc
2
Maintenance
Warning
1. In order to reduce the risk of fire and electrical shock, do not lay this product in rain or damp places.
2. Please keep away from the strong magnetic field; it may cause the noise of the video and audio signals.
The power
1. Please use the power adapter provided or recommended by the manufacturer in order to
avoid damage.
2. For a third party power adapter, please make sure the voltage range, supplied power,
and polarity of power lead are fit.
3. Please disconnect the power cable under the following situations:
(A). If you do not operate this monitor for a period of time;
(B). If the power cable or power adaptor is damaged;
(C). If the monitor housing is broken.
The monitor
1. Please don't touch the screen with your fingers, which would probably deface the screen.
2. Please don't press the screen; the LCD is extremely exquisite and flimsy.
3. Please don't lay this product on unstable place.
Cleaning
1. Please clean the screen with dry and downy cloth or special LCD cleanser.
2. Please do not press hard when cleaning the screen.
3. Please do not use water or other chemical cleanser to clean the screen.
The chemical may damage the LCD.
Contents
Preface
Maintanance
Contents
Packing list
Introduction
Installation Dimensions
Operation Instruction
Front Panel
Rear Panel
OSD
Main Menu
Specification
Trouble-Shooting
2
3
3
4
4
5
7
7
8
9
11
20
21
3
Introduction
FM-16B adopts TFT-LCD panel，with resolution of 1920x1080 and 178° x 178° wide viewing angle. It
supports 2 x 3G/HD/SD-SDI, 1x HDMI, 1x VIDEO , and 1 x SDI, 1x HDMI loop through, plus earphone
and speaker out.
Features:
Prevailing slim bezel design
178-degree omnidirectional visual angle
Having multi format input including 3G/HD/SD-SDI,VIDEO and HDMI
Adopting full HD , wide viewing angle TFT glass
Using 10-bit signal processing technology
Support HDR technology and wide range color space
Support multiple color space: SMPTE-C , EBC , ITU709 , ITU2020 , P3
Powerful audio and video analysis function
Support a variety of audio and video auxiliary analysis functions
Colorful marker selection(Marker , Safety area)
Support IMD long-range control
Support Marker , Time Code , MET display
Support presetting the color temperature using customized values
Packing list
Standard package
Monitor
Stands with screws
Power cord
User manual
Warranty card
Protective glass
Battery plate (Gold mount or V-mount mount)
D-tap to 4-pin XLR Cable
C-stand
BS screw-socket connection plate
Carrying case
details
X 1
X 2
X 1
X 1
X 1
X 1
X 1
X 1
X 1
X 1
X 1
No.
1
2
3
4
5
6
7
8
9
10
11
4
Note: When leaving the factory, the battery plate, C-stand, protective glass and BS screw-socket
connection plate shall be installed on the product. The monitor shall be installed in the carrying
case. The inner lining of the carrying case is unfolded, and can be used as the sun hood.
Installation Dimension
The main body (in mm)
5
141.5 100.0
383.01
100.44
242.31
267.00
3.30
383.01
274.10
66.90
48.70
128.00
The monitor can be mounted to a standard rack or mounted at the foot.
1. Foot mounting instructions: There are screw holes at the rear panel of the monitor, which are
labeled in the following figures. Assemble the parts of the stands, then insert the stands into the
case, and fasten it with the screws provided. The installation is as follows:
Istallation
6
Figure 1
Figure 2
Right Stand
Insert the
stands into the case
Left Stand
Pan Head Screw 4-M4*8
Pan Head
Screw 4-M4*8
Operation Instructions
·Front Panel
7
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
⑴ Input selection: Used to switch an input signal
⑵ Adjust upward
When working with main menu, toggle this button to select the next item or increase the number
When not displaying the Main menu , display the Fast menu
⑶ Adjust downward
When working with main menu, toggle this button to select the next item or decrease the number
When not displaying the Main menu, display the Fast menu
⑷ Return/Exit
With the Main menu: when working with the Main menu, LEFT button achieve the following functions:
● Back to the higher level menu
● Back to the higher level menu and not save the setting of the menu item value
● Quit the Main menu
With the Fast menu: when displaying the Fast menu, press LEFT button to decrease the item value.
⑸ Select next
With the Main menu:
● Enter into the next level menu.
● Turn Page: when the current selection in the sub-menu list is Next Page, press this button to turn
to the next page circularly.
With the Fast menu: when displaying the Fast menu, press RIGHT button to increase the item value.
Fast Menu: When not displaying the Main menu, press UP or DOWN button to display the
Fast Menu list, toggle among these menu items: Volume, Brightness, Contrast, Saturation,
Backlight and Sharpness.
Volume: 0~31 value adjustment and the default value is 16
Brightness: 0~100 value adjustment and the default value is 50
Contrast: 0~100 value adjustment and the default value is 50
Saturation: 0~100 value adjustment and the default value is 50
Backlight: 0~10 value adjustment and the default value is 5
Sharpness: 0~63 value adjustment and the default value is 8
8
⑹ Save/Return/Main menu
Display the Main menu: press OK/MENU button, it will display the main menu at the center of
the screen.
Save/Back: confirm the selection and back to the higher level menu.
Turn Page: when the current selection in the sub-menu list is Next Page, press this button to
turn to the next page circularly.
⑺ Function button F1: F1 FUNCTION and U1 User Preset button
⑻ Function button F2: F2 FUNCTION and U2 User Preset button
⑼ Function button F3: F3 FUNCTION and U3 User Preset button
⑽ Function button F4: F4 FUNCTION and U4 User Preset button
Click the function key to enter the key operation item of the corresponding function key, and
continuously click the key to switch the associated operation item value. Long press the function
key seconds to switch to the user preset “user 1”, and the preset name is displayed on the left
side of the screen.
⑾ Power on/off: Used to power on or standby
·Real Panel
(3) (2)(1)
(4)
(5)
(6)
(7)
(8) (9)
(10)
(11)
(12)
⑴ Power Switch: Push the button to the direction “-” to switch on the power, or push the button
to the direction “O” to switch off the power
⑵ AC Power Input: AC IN, 100~240V 50/60HzAC
⑶ DC Power Input: DC IN, XLR 3pin, 11~17V 3ADC
⑷ SDI Input: SDI1 IN, BNC
⑸ SDI Input: SDI2 IN, BNC
⑹ SDI Output: SDI1 OUT, BNC
⑺ VIDEO Input: VIDEO IN, BNC
⑻ HDMI IN : HDMI IN, HDMI Type-A, support HDCP, compatible with dvi1.0
⑼ Headphone: 3.5mm Stereo Jack
⑽ Audio Input: AUD IN, 3.5mm Stereo Jack
⑾ USB: Used for LUT input and firmware upgrading
⑿ RS485X2: RS485-1, RS485-2, RJ45 connector, support for cascade connection and IMD remote
control
Pin
1,2
3
4
5
6
7 ，8
RS485
GND
Tx-
Rx+
Rx-
Tx+
NC
9
·OSD
⑴ Status Information
The Status Information is displayed in the top left corner of the screen, and includes the input
channel and signal format. You can define it in USER CONFIG menu.
The Status Information usually displays as the following situations:
◇ “UNKNOW” appears if an unsupported signal is input.
◇ “NO SIGNAL” appears if no signal is input
◇ The signal is normal, for example: 1080i59.94, 720P50, etc.
⑵ Waveform and Vector
This is effective only for SDI signal. The waveform and vector of the input signal are configurable
in the MAIN Menu.
⑶ Aspect Marker
It is used to mark different area of the image. You can set whether to display it or not and their
displaying mode in USER CONFIG menu.
⑷ Area Marker
It is used to mark different area of the image. You can set whether to display it or not and their
displaying mode in USER CONFIG menu
⑸ Center Marker
It is displayed in the center of the screen, and marks the center of the image. You can set whether
to display it or not in USER CONFIG menu.
⑹ Audio Meter
It is displayed for audio monitoring. You can set its groups, position and mode in USER CONFIG menu.
⑺ Time Code
It is displayed at the bottom of the image, the format is HH:MM:SS:FF, if there is no timecode avail
able, the monitor will display --:--:--:--.
⑻ IMD
The IMD text displays at the bottom of the screen, the length can’t exceed 16 characters, and you
can choose letter, number or other character for it. The color of IMD can be setted for three colors:
RED、GREEN and YELLOW.
Status Information
Aspect Marker
Area Marker
Center Marker
KEY INHIBIT
Wave Form
Timecode
Audio Meter
IMD
Introduction of audio and video functions
10
8-ch embedded audio meters
Under SDI and HDMI, it displays 8 channels embedded audio meters. The audio meter is green,
and will turn yellow when audio exceeds -20dB, and turn red when audio exceeds -9dB.
Time code（SDI）
Under SDI input, it can display the SMPTE time code (VITC1, VITC2 or LTC) on the top of the screen,
which is used extensively for synchronization, and for logging and identifying material in recorded
media. If no Timecode information is detected, it will be displayed as “TC UNLOCKED”.
Waveform (Y, Cb, Cr, R, G, B)
Under SDI and HDMI input, totally 6 kinds of waveforms which are Y, CB, CR, R, G and B can be
selected so as to check the brightness and chroma distribution.
Vector
The displayed vector scope pattern is available under both SDI and HDMI, represents saturation as
distance from the center of the circle, and hue as the angle, in standard position, around it.
Histogram (R, G, B)
The histogram is a bar graph that shows the distribution of luminance values in the picture. There’re
R, G, B histograms that individually displayed simultaneously, available under both SDI and HDMI.
Peaking focus assist (red/blue/white switch)
The Peaking focus assist function is to mark the sharpest edges of the image with red or blue color
under SDI and HDMI input, for users to check if the subjects are focused.
User can set function Keys F1～F4 to turn on or off this function.
Zebra stripes
Zebra Stripes are used to check if the image is over exposed or not by showing black and white lines
on the monitor. It is considered over exposed when luminance value exceeds 90%.
User can set function Keys F1～F4 to turn on or off this function.
False Color
The false color is used to aid in the setting of camera exposure. Under false color mode, there’s a color
chart on the bottom of screen for reference. The color from the dark to the bright will be displayed as
blue, cyan, green, yellow, orange and red in a consecutive way. User can set function Keys F1～F4 to
turn on or off this function.
IMD
When using external control unit, it can display the video source ID and tally information on the
screen.
◆
◆
◆
◆
◆
◆
◆
◆
◆
Indice
Altri manuali SWIT Monitor
SWIT
SWIT S-1173H Manuale utente
SWIT
SWIT BM-215NDI Manuale utente
SWIT
SWIT S-1053F Manuale utente
SWIT
SWIT M-1093F Manuale utente
SWIT
SWIT S-1073F Manuale utente
SWIT
SWIT s-1222F Manuale utente
SWIT
SWIT S-1071C Manuale utente
SWIT
SWIT S-1051H Manuale utente
SWIT
SWIT S-1243F Manuale utente
SWIT
SWIT S-1071H+ Manuale utente
SWIT
SWIT S-1051C Manuale utente
SWIT
SWIT S-1173F Manuale utente
SWIT
SWIT S-1242H Manuale utente
SWIT
SWIT S-1071H Manuale utente
SWIT
SWIT S-1223F Manuale utente
SWIT
SWIT M-1071H Manuale utente
SWIT
SWIT ProHD DT-X91F Manuale utente
SWIT
SWIT M-1051H Manuale utente
SWIT
SWIT S-1071F Manuale utente
SWIT
SWIT S-1071C Manuale utente
