Swordfish 5-in-1 Creative Trimmer Manuale utente
5-in-1 Creative Trimmer
Multi-blade folding paper trimmer
To download or view these instructions in other
languages please scan the QR code or visit
www.snopakebrands.com
Operating Instructions
www.snopakebrands.com
Blade Selector Cutting Head End Cap
Guide Rail
For further information
or to register your product
visit www.snopakebrands.com
SCAN ME
2
Corner
Trimmer
Cutting Mat
Strip
Pressure
Plate
Operating Instructions
www.snopakebrands.com 3
SPECIFICATIONS
Colour
White & Purple
Suitability
Home
Swordfish Product Code
40343
Maximum Paper Size
A4
Cutting Length (mm)
320
Sheet Capacity
(Based on 80gsm paper)
Straight Cut - Up to 8 Sheets
Wavy Cut - Up to 5 Sheets
Perforated Line - Up to 5 Sheets
Score Line - Up to 1 Sheet
Corner-Trim - Up to 5 Sheets
Replacement Cutting Head Code
40344
Replacement Cutting Strips Code
40346 (pack of 3)
Replacement Corner Trimmer Code
40345
Product Warranty (years)
2
This space-saving rotary 5-in-1 Creative Trimmer will enable you to make straight
cuts, wavy cuts, perforations and score-lines with ease. The cutting head holds
four dierent rotary blades – changing from one to another is quick and easy.
The removable corner-trimmer produces neat round corners on your work.
And – when you have nished, the Creative Trimmer folds away for easy storage!
Operating Instructions
www.snopakebrands.com
Operation
Remove any staples or paper-clips from the paper that you wish to cut.
1
Unfold the baseplate and
set it on a stable worktop.
Position the paper under the
transparent pressure-plate.
Open the transparent cover on the cutting
head and select the desired blade by rotating
the silver thumb-wheel.
Closing the transparent cover will lock
the desired blade in place. If the cover
does not close completely, please adjust
the thumbwheel.
Slide the cutting head to one end of the guide rail.
2
6
3
4
5
4
Operating Instructions
www.snopakebrands.com
Helpful Hints
•Do not exceed the stated capacity of each blade as this will damage the
trimmer and produce inaccurate cuts
•For precise work, cut as few sheets at a time as possible
•Always perform some test cuts – especially when cutting a new material
•For best results, press down rmly on the cutting head then slide it slowly
and steadily
Operation continued
7
8
Use one hand to press
down on the pressure-plate,
to hold the paper in place.
With the other hand, press
down rmly on the cutting
head whilst sliding it along
the guide-rail.
Note: increased pressure will be
required when cutting multiple
sheets of paper
5
Operating Instructions
www.snopakebrands.com
Using the Corner Trimmer
Replacing the Cutting Head
Remove the corner-trimmer
from the Creative Trimmer
and place it on a stable
work-top.
Insert the paper into the silver corner.
Press down rmly on the raised boss.
Waste clippings will be collected in the corner-trimmer. To empty, turn the
corner-trimmer upside-down and remove the clear base.
1
2
3
4
6
The corner-trimmer supplied is attached to the trimmer by a hook-and-loop fastener,
so that it is always handy. It will produce a neat, rounded corner on up to 5 sheets of
80gsm paper at a time.
Even the blades in a Swordsh trimmer will eventually become dull and require
replacement. New cutting heads, fully assembled and complete with four blades,
are available from your usual Swordsh dealer (the product code is 40344).
Operating Instructions
www.snopakebrands.com
Replacing the Cutting Mat Strip
1
3
5
2
4
7
Remove the guide-rail end-stop
by sliding it upwards
Lift and remove the transparent
pressure-plate
Note that a replacement cutting-mat strip is packed inside the guide rail.
Further cutting strips are available in packs of 3, code 40346.
Remove the guide rail and cutting
head.
Caution – do not touch
the blades – they are
extremely sharp!
The cutting mat can now be
removed and rotated or replaced
The rotary blades run on a replaceable cutting-mat strip. In time, this will wear and
require replacement. However it will have a long life as it can be both rotated and
ipped. To remove or replace the cutting mat:
When re-assembling your Swordsh 5-in-1 Creative Trimmer, please ensure that the
transparent pressure-plate is correctly located and that the rotary blades are running
on the cutting mat, not on the pressure-plate.
www.snopakebrands.com
To fi nd out more information on the full range of products,
visit us at www.snopakebrands.com
Pencil Sharpeners
Paper Shredders Document Laminators
Have you seen the rest of the
Swordfish range?
The Triple
1200XXCD
800XC
Pointi VariPoint
SuperSlim Series
A4
HyperSpeed
A3
Indice
Altri manuali Swordfish Tagliabordi
