Syinix 32E1C Manuale utente
32E1C
Please read this instruction manual carefully before usage and save it for future reference.
Veuillez lire attentivement ce mode d'emploi avant de l'utiliser et conservez-le pour référence ultérieure.
2
Introduction
English
Warning
Istal the v in the room where direct sunlight does not fll on the TV. Total darkness or a reflection
on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV unit and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or
premature component failure.
Do not install the TV in a location near heat sources such as radiator, air ducts,
direct sunlight, or in a place somewhere like close compartment and close area.
Do not cover the ventilation openings when using the TV.
The indicator light will last about 30 seconds to go out after cutting off the electricity,
during this period, you cannot repower it on until the indicator light goes out.
To prevent the spread of fire, keep candles or other open flames away from
this product at all times.
Thanks a lot for your attention!
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to alert the user to avoid the risk of electric shock, do not
disassemble this equipment by anyone except qualified service personnel.
This symbol is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the equipment.
This equipment is a Class II or double insulated electrical appliance.
It has been designed in such a way that it does not require a safety connection to
electrical earth.
3
Caution
English
Caution
Caution
Caution
Caution
High voltages are used in the operation
of this product. Do not open the product's
casing. Refer servicing to qualified service
personnel.
To prevent fire or electrical shock hazard,
do not expose the unit to rain or moisture.
Do not place objects filled with liquids,
such as vases, on the apparatus.
Do not drop or push objects into the
television cabinet slots or openings.
Never spill any kind of liquid on the
television receiver.
Avoid exposing the main unit to direct sunlight
and other sources of heat. Do not put
the television receiver directly on other products
which give off heat: e. g. video cassette players
amplifiers. Do not block the ventilation holes
at the back cover. Ventilation is essential to
prevent failure of electrical component. Do
not squash power supply cord under the main
unit or under the other heavy objects.
Caution
Caution
Caution
Caution
Never stand or push or lean on the product
or its stand.
You should pay special attention to children.
Do not place the main unit on an unstable
cart stand, shelf or table. Serious injury to an
individual, and damage to the television,
When the product is not to be used for
longer period of time, it is advisable to
disconnect the AC power cord from the
AC outlet.
The LED panel used in this product is made
of glass, therefore it can break when the
product is dropped or applied with impact.
Be careful not to be injured by broken glass
pieces in case the LED panel breaks.
may result if it falls.
4
Menu Operation
English
User can press ▲/▼to select OSD
Language, then press ◄/►/OK button
to adjust OSD Language you want.
INPUT SOURCE
Press ▲/▼to select Home Page or
Auto Scan.
Press ►/OK button to confirm.
Press ▲/▼to select Auto Scan/Manual
Scan/Channel Edit.
Press ►/OK button to confirm.
Press "SOURCE" button to enter the SOURCE menu.
Press ▲/▼button to select the source you want
Press "OK" button to enter the source.
Press "EXIT" button to quit.
5
Brightness
Picture Mode
Adjust the absolute value of color (tones) lightness/darkness.
Adjust the lighter and darkness areas of the image.
Enhancing the object edges for the picture detail.
Adjust the intensity of the color in the picture.
Adjust the hue (Red, Green, Blue) of the picture.
Select the color temperature of the picture.
Set the picture aspect ratio.
Contrast
Sharpness
NR/Dynamic Contrast.
Select the Medium/Strong/Off/Weak to improve the quality
of the picture.
Advanced Settings
Select the Medium/Strong/Off/Weak to improve the dynamic
contrast.
Dynamic Contrast
NR
Saturation
Hue
Color Temp
Aspect Ratio
English
PICTURE MENU
Press "MENU" to enter the main menu.
Press "◄/►" buttons to select “Picture”.
Standard/Dynamic/Movie/Energy saving/Personal.
6
English
Sound Mode Standard/Movie/Music/Sports/Personal.
Adjust the high frequency sounds.Treble
Bass Adjust the low frquency sounds.
Adjust the level of sound coming from the left and right speakers.Balance
Surround Sound Off/On.
PCM/Auto/Off.Digital Audio out
Press the "◄/►" to select On/Off.
When set on, it will level out the sound being heard when sudden
changes in volume occur during commercial breaks or channel
changes.
AVL
SOUND MENU
Press "MENU" to enter the main menu.
Press "◄/►" buttons to select “Sound”.
7
English
CHANNEL MENU
Press "MENU" to enter the main menu.
Press "◄/►" buttons to select "Channel".
Press "▲/▼" button to select：Auto Scan/Manual Scan/Channel Edit.
Auto Scan：
Tuning the program automatically.
Press“EXIT”button to stop searching.
Manual Scan：
Press the frequency of channel
and searching.
8
Enter Password Initial password: 0000.
Off/On.Enable
Channel Locked Lock TV program.
Lock the key panel button.Keypad Locked
New Password Set new password.
Reset the lock mode settings to the default settings.Clear Lock
Select "Channel Edit" to edit the program have
searched.
Press "RED" button delete the program have
searched.
Press "GREEN" button to skip the programs.
Press "YELLOW" button to move the program
Press "BLUE" button to add or delete the
channel in your favourite list.
English
LOCK MENU
Press "MENU" to enter the main menu.
Press "◄/►" buttons to select "Lock" .
9
OSD Language Select the On-screen display language.
Select teletext language.Teletext
Blue Screen On/Off.
OSD Time/Sleep Timer/Auto Standby.Time Settings
Select the time in hours (1 Hours, 2 Hours, 4 Hours, off ) that you want
the TV to remain on after your last operation. Cancel by setting it
into Off mode.
Auto Standby
Press ▲/▼button to select HDMI CEC Control(HDMI CEC Control/
TV Auto Power On/Device Auto Standby/Speaker preference/
Amplifier Support ARC).
HDMI CEC Control
Press ▲/▼button to select "Reset" to clear what you have set in,
and the TV will return in the default setup mode.
Reset
OSD Time Select the time in seconds(5 seconds /10 seconds /15 seconds /Off)
that you want the On-screen menu remain display after your last
operation.
Select the time in minutes (5 mins, 15 mins, 30 mins, 60 mins, 90 mins,
120 mins, 240 mins, off ) that you want the TV to shut off automatically
after you set the time. Cancel by setting it into Off mode.
Sleep Timer
English
SETUP MENU
Press "MENU" to enter the main menu.
Press "◄/►" buttons to select "Setup".
Indice
Lingue:
Altri manuali Syinix TV
