SYLVI Analog Manuale utente

Instruction Manual
Operation Instructions
How to Set Date & Time:-
Strap Instruction:-
1. Pull out the crown to position B.
2. Turn crown either way to correct date.
3. Fix your correct date & Again pull out the crown to position C.
4. Turn crown either way to correct time.
5. Fix your correct time.
6. Push in the crown to the position A (Normal).
Clasp release
button
Buckle
Buckle Buckle
Buckle
A B C
Strap
Strap
Strap
Hinges
Hinges
Hole to insert strap
Hole to insert strap
- Push the 2(Two) clasp release buttons
on either of the buckle to release the clasp
- Insert your back strap through the hole in the
open hinges and set the strap into the lock hinges
- The buckle will release and
the hinges will open in an outward motion
- Once the strap is set into the lock hinges, press
the buckle and hinges with one thumb and one
nger.Now the watch will be set on your wrist
1
>
3
>
2
>
4
>
04 www.sylvi.in
Note: Do not operate the watch inside water.
Lock hinges
Press to Lock Strap
Lock hinges
2

Instruction Manual
Water Resistant
For information about the water-resistant rating of Sports, Casual, Chronograph,
and Slim watches please refer to page 3.
To ensure water does not enter the watch and cause damage to it,
please follow the instructions listed below:
The water resistant rating provides guidelines for appropriate water-related exposure to
avoid damage to internal watch components. Please see the chart for recommended us-
age guidelines.
Recommendations For Water-Related Use
Indication
None
3 ATM • 30 Meters
5 ATM • 50 Meters
10 ATM • 100 Meters
20 ATM • 200 Meters
SPLASH RESISTANT
(Hand Washing)
SUBMERSIBLE
(Swimming)
SHALLOW DIVING
(Snorkeling)
SCUBA DIVING
(Not Deep Sea)
• Do not adjust the crown while the timepiece is in contact with water.
• Ensure the crown is in the closed position before contact with water. For timepieces with
screw-down crowns, ensure the crown is completely tightened before contact with water.
• For timepieces with pusher-enabled functionality, do not engage the function underwater.
• Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas,
or steam rooms).
• Avoid exposure to water moving with force (i.e. water running from a faucet, ocean
waves, or waterfalls).
• Avoid long exposure to saltwater. After contact with salt water, rinse the watch under
tap water
• If rated 5ATM or higher and wipe dry with a soft cloth.
05 www.sylvi.in

Instruction Manual
Warranty Instructions
Get Additional Warranty
This warranty does not cover:
Your watch is warranted for six (6) months from the original date of purchase under the
terms and conditions of the warranty. The warranty covers manufacturing defects, i.e. the
watch movement, hands, and dial only. The covered components will be repaired or the
watch will be replaced free of component and labor charges if it proves to be defective in
material or workmanship under normal use.
- In case of replacement, we cannot guarantee that you will receive the same model watch.
If your model is not available, a watch of equal value and similar style will be provided.
or
https://sylvi.in/warranty-registration
Click Here to Open
• Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or
bracelet; including plating on the case and/or bracelet.
• Damage resulting from improper handling, lack of care, accidents, normal wear and tear
or aging.
• Water damage if care instructions for the product’s water resistance levels (as per the
product specification) were not followed.
• Products that are not purchased from an authorized retailer.
• This warranty is void if the watch has been damaged by accident, negligence of persons
other than authorized sales or service agents, unauthorized service, or other factors not
due to defects in materials and workmanship. This warranty is void if the serial number or
product date codes or other tracking marks have been removed, altered, or obliterated.
06 www.sylvi.in

Instruction Manual
How to Claim Warranty?
How to Reach Us?
Step 1:
Step 2:
Contact customer care and report your problem. An RMA ID will be generated (Without
RMA ID, warranty cannot be claimed)
The product will have to be sent to service center including the following information.
For any service-related inquiries and feedback, call our number
+919687660234 Monday to Saturday, 9.00 am to 6.00 pm.
(closed on National and Festival holidays).
We promise to reply by the next working day.
RMA ID - Given by customer care executive
Name
Full address
Daytime contact mobile number
Email address
Where your item was purchased from
Model reference of the item (Found on the back of your watch)
Full description of the work required
A copy of your proof of purchase
07 www.sylvi.in
Altri manuali per Analog
1
Indice
Altri manuali SYLVI Orologio






















