Synapse SDI110 Manuale utente
Warranty & Registration
Thank you for purchasing a Bluefish444
Synapse SDI110
For your warranty to be valid and to obtain free email and telephone support please register your product at;
www.bluefish444.com ,select “Register here”.
Or type in http://www.bluefish444.com/products/warranty/register.asp.
You will be presented with a Product Registration page.
Enter theserial number as shown here.
Your serial number is located underneath your converter and is also attached to this warranty and registration
document, located above.
Registering your product will activate your 1 year warranty. If you do not register your product, the
warranty will not apply and you will not receive any email or phone support from Bluefish444.
By registering your product you will also be notified of new product releases, seminars, news, driver updates and
announcements.
Support Contacts
World North America Europe
9am to 5pm
(GMT+10 hours)
tel: +61 (0)3 9682 9477
support@bluefish444.com
9am to 5pm
(GMT -5 hours)
tel: +1-818-633-8866
tel: +1-617-418-1792
support-usa@bluefish444.com
9am to 5pm
tel: +44 (0)20 8868 2575
support@bluefish444europe.com
S/N
1
2
OFF ON
3
4
5
6
7
8
NA NA
HDMI Output
Type A HDMI
USB
Mini-A
SDI Output
BNC
SDI Input 2
BNC
Power Input
+12v DC
AES/EBU Output
1/4in Stereo TRS jack
Analog Output
1/4in Stereo TRS jack
DVI outHDMI Out
HDMI Converter OnHDMI Converter O
HDMI Pattern OnHDMI Pattern O
Status OSD OnStatus OSD O
PsF Mode OnPsF Mode O
De-Interlace OnDe-Interlace O
NANA
*NOTE: Only one conversion process can take place at once, either Down Conversion,
De-Interlace or PsF mode.
*NOTE: The user may be required to power cycle the converter when an Input signal is changed
and/or the DIP switches are re-congured.
Converter Conguration
Synapse converters are congured via DIP switches on the side of the converter. SDI conversion to the
HDMI signal includes video scaling, PsF mode and de-interlacing, all congured via the DIP switches.
The SDI input signal is displayed as an SDI loop through on the SDI output BNC. A second SDI input is
provided for redundancy, providing a fail safe mechanism should an input be lost.
Conguration DIP switches
Video/Audio
Processing
SDI Input 1
BNC
SDI 110
SDI => HDMI
SDI110 User Manual
Bluesh444 17b Market Street, South Melbourne Victoria, 3205 Australia
support@bluesh444.com
http://www.bluesh444.com
Input format
HD-SDI
Output Format
HMDI
1080p60 1080p60
1080p59,94
1080p59,94
1080p50 1080p50
1080p30 1080p30
1080p29,97 1080p29,97
1080p25 1080p25
1080p24
1080p24
1080p23,976 1080p23,976
1080i60 1080i60
1080i59,94 1080i59,94
1080i50 1080i50
720p60
720p60
720p59,94 720p59,94
720p50 720p50
576p PAL
PAL - i50 PAL - i50
NTSC - i59,94 NTSC - i59,94
Synapse converters support the following Input, and Output formats:
OR
LED Status
Off
Green
Orange
Green + Orange
HDMI Out
NA
SD
HD
3G
SDI Audio Present
NA
SD
HD/3G
NA
USB Not connected Connected NA NA
SDI 1 In
Inacve
SD
HD
3G
SDI 2 In Inacve SD HD 3G
Power Status
Not Connected
Connected
NA
NA
Synapse converters come with Status LED’s for each connection these LED’s can be used to diagnose connection issues.
See table below:
Down
Conversion
De-Interlace
720p60 NA
720p59,94
NA
720p50 NA
NTSC - i59,94 NA
NTSC - i59,94 NA
PAL - i50 NA
PAL - i50
NA
PAL - i50 NA
NTSC - i59,94 1080p30
NTSC - i59,94 1080p29,97
PAL - i50 1080p25
NTSC - i59,94
NA
NTSC - i59,94 NA
PAL - i50 NA
NA NA
NA 625p25
NA 525p29,97
OR
SDI 110
SDI => HDMI
SDI110 User Manual
Bluesh444 17b Market Street, South Melbourne Victoria, 3205 Australia
support@bluesh444.com
http://www.bluesh444.com
Altri manuali Synapse Convertitore multimediale
