Synology DVA1622 Manuale

Synology Network Video Recorder DVA1622

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3

Synology DVA1622 at a Glance 4

System Modes and LED Indicators 5

Other LED Indicators 7

Hardware Specication 8

Spare Parts 9

Optional Accessories 9

Safety Instructions 10

Chapter 2: Hardware Setup

Tools and Parts for Component Installation 11

Install Drives 11

Start up Your Network Video Recorder 12

Chapter 3: Install DSM on Network Video Recorder

Install DSM 14

Learn More 15

Synology_HIG_DVA1622_20211227

Thank you for purchasing this Synology product! Before setting up your new Network Video Recorder, please

check the package contents to verify that you have received the items below. Also, make sure to read the safety

instructions carefully to avoid harming yourself or damaging your Network Video Recorder.

Note: All images below are for illustrative purposes only, and may di󰀨er from the actual product.

Package Contents

Main unit x 1 AC power cord x 1

AC Power Adapter x 1

Screws for 2.5" drives x 10 Drive tray key x 2 RJ-45 LAN Cable x 1

Before You Start 1

Chapter

4Chapter 1: Before You Start

Synology DVA1622 at a Glance

No. Article Name Location Description

1 Drive Tray

Front

Install drives (hard disk drives or solid state drives) here.

2 Drive Tray Lock Lock or unlock drive trays.

3 STATUS Indicator Displays the status of the system. For more information, see

"System Modes and LED Indicators".

4 DRIVE Status

Indicator

Displays the status of each drive. For more information, see "Other

LED Indicators".

5 USB 3.2 Gen 1 Port Connect external drives or other USB devices to the Network

Video Recorder here.

6 Power Button

1. Press to power on your Network Video Recorder.

2. To power o󰀨 your Network Video Recorder, press and hold until

you hear a beep sound and the Power LED starts blinking.

7 Fan

Back

Disposes of excess heat and cools the system. If the fan

malfunctions, the Network Video Recorder will emit a beeping

sound.

8 1GbE RJ-45 Port Connect RJ-45 network cable here.

9 Reset Button

1. Mode 1: Press and hold until you hear a beep sound to restore

the IP address, DNS server, and password for the admin

account to default.

2. Mode 2: Press and hold until you hear a beep, release the

button immediately, then press and hold again until you hear

three beeps to return the Network Video Recorder to "Not

Installed" status so that DiskStation Manager (DSM) can be

reinstalled.

For detailed information on how to reset your Network Video

Recorder, please refer to this article.

10 HDMI Output Connect HDMI cable here.

11 Power Port Connect power cord here.

12 Kensington

Security Slot Attach a Kensington security lock here.

13 USB 3.2 Gen 1 Port Connect external drives or other USB devices to the Network

Video Recorder here.

5Chapter 1: Before You Start

System Modes and LED Indicators

System Modes and Denitions

There are 7 system modes in Network Video Recorder. The system modes and their denitions are as below:

System mode Denition

Powering on

Network Video Recorder is powering on when you press the power button or

restarting when you run operations in DSM. During the boot up process, the device

also performs hardware initialization, such as hardware reset or BIOS initialization.

Shutting down Network Video Recorder is shutting down when you press the power button or run

operations in DSM.

DSM not ready

DSM is not ready for use. This could either be:

• Network Video Recorder is powered on, but DSM is not properly installed.

• Network Video Recorder is currently powering on and initializing services

necessary for DSM to fully function.

• The attached UPS device has insu󰀩cient power; DSM stops all services to

prevent data loss (enters safe mode).

DSM is ready for use DSM is fully functioning and users can sign in.

Hibernation Network Video Recorder has been idle for a while and is now in Hibernation mode.

Application

Certain packages/services (e.g., USB Copy and Find me service) while in operation

will control the actions of the LED. After the operation is complete, the LED indicator

will return to its normal state.

Powered o󰀨 Network Video Recorder is powered o󰀨.

Identify System Modes

You can identify the system mode through the POWER and STATUS LED indicators. Please refer to below table

for more details.

System mode

LED Indicator

POWER STATUS

Green Green Orange

Powering on Blinking O󰀨 O󰀨

Shutting down Blinking Static O󰀨

DSM not ready Static Blinking O󰀨

DSM is ready for use Static Static O󰀨

Hibernation Static O󰀨 O󰀨

Application Static Switching

Powered o󰀨 O󰀨 O󰀨 O󰀨

Note: If the STATUS LED remains static orange or continuously blinks orange, this indicates there are

system errors such as fan failure, system overheating, or volume degrade. Please sign in to DSM for detailed

information.

6Chapter 1: Before You Start

Transitions between System Modes

To better understand the transition between system modes, please refer to below examples:

• Powered on with no DSM installed:

Powered o󰀨 > Powering on > DSM not ready

• Powered on with DSM installed:

Powered o󰀨 > Powering on > DSM not ready > DSM is ready for use

• Enter hibernation then wake up from hibernation:

DSM is ready for use > Hibernation > DSM is ready for use

• Shutdown Network Video Recorder:

DSM is ready for use > Shutting down > Powered o󰀨

• Power failure with UPS attached:

DSM is ready for use > DSM not ready (due to power failure, DSM enters safe mode) > Shutting down >

Powered o󰀨 > Powering on (power has recovered, DSM will reboot)> DSM not ready > DSM is ready for use

7Chapter 1: Before You Start

Other LED Indicators

LED Indicator Color Status Description

DRIVE status

Green

Static Drive ready and idle

Blinking Accessing drive

Orange1Static

Locating drive

Drive deactivated by user

Port disabled2

Removing this drive will cause system

damage; this is the only drive with

DSM installed

O󰀨 No internal Drive

Rear 1GbE LAN

(on lower side of jack)

Green

Static

1 Gbps connected

Orange 100 Mbps connected

O󰀨 10 Mbps connected/No network

Rear 1GbE LAN

(on upper side of jack)

Green

Static Network connected

Blinking Network active

O󰀨 No network

Note:

1 When the drive LED indicator is red/orange, we recommend you sign in to DSM and go to Storage

Manager > HDD/SSD for more information.

2 Please try to restart your Network Video Recorder or re-insert the drives, then run the HDD/SSD

manufacturer's diagnostic tool to check the health status of the drives. If you can sign in to DSM, please

run the built-in S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact

Synology Technical Support for help.

8Chapter 1: Before You Start

Hardware Specication

Item DVA1622

Compatible Drive Type 2.5"/3.5" SATA x 2

External Port

• USB 3.2 Gen 1 x 2

• HDMI Output x 1

LAN Port 1GbE RJ-45 x 1

Size (H x W x D) (mm) 166 x 106 x 223

Weight (kg) 1.51

Supported Client

• Windows 7 onwards

• macOS 10.12 onwards

File System

• Internal: Btrfs, ext4

• External: Btrfs, ext4, ext3, FAT32, NTFS, HFS+, exFAT1

Supported RAID Type

• Basic • JBOD • RAID 0 • RAID 1

• Synology Hybrid RAID (1-Disk Fault Tolerence)

Agency Certication • FCC Class B • CE Class B • UKCA • BSMI Class B

• EAC • VCCI • RCM • KC • RoHS Compliant

HDD Hibernation Yes

Scheduled Power On/O󰀨 Yes

Wake on LAN Yes

Language Localization

Environment Requirement

• Line voltage: 100 V to 240 V AC

• Frequency: 50/60 Hz

• Operating Temperature: 32 to 104˚F (0 to 40˚C)

• Storage Temperature: -5 to 140˚F (-20 to 60˚C)

• Relative Humidity: 5% to 95% RH

Note: Model specications are subject to change without notice. Please refer to www.synology.com for the latest information.

1Support for exFAT can be enabled by purchasing and downloading exFAT Access in Package Center.

9Chapter 1: Before You Start

Spare Parts

Visit www.synology.com/products/spare_parts if you need to replace system fans, disk trays, or power supply

units

Model Name Picture Description

Disk Tray (Type D9) 3.5"/2.5" Drive Tray With Lock

FAN 92*92*25_1 System Fan 92*92*25 mm

Adapter 60W_1 Adapter 60W Level VI

Optional Accessories

With Synology accessories, you can customize your Network Video Recorder to t di󰀨erent business

environments without worrying about compatibility and stability. Visit www.synology.com/compatibility for more

information.

10 Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Ensure a stable environment

with no abrupt changes in temperature or humidity.

Place the unit right side up at all times.

Keep the unit away from liquids.

Before cleaning, unplug the power cord. Do not use chemical or aerosol cleaners. Wipe

with damp paper towels.

To prevent the unit from falling over, do not place it on carts or any unstable surfaces.

The power cord must plug into the correct supply voltage. Ensure the supplied AC voltage

is correct and stable.

Warning, electric shock hazard. To remove all electrical current from the device, ensure

that all power cords are disconnected from the power source.

Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries

appropriately.

Power cord must be plugged into a socket-outlet with earthing connection.

Keep body parts away from moving fan.

Indice

Altri manuali Synology Hardware di rete

Synology

Synology USB Station 2 Manuale utente

Synology

Synology EDS14 Manuale utente

Synology

Synology RackStation RS217 Manuale

Synology

Synology DS1520+ Manuale

Synology

Synology NVR216 Manuale utente

Synology

Synology SA6400 Manuale utente

Synology

Synology DX517 Manuale utente

Synology

Synology RackStation RS2416+ Manuale utente

Synology

Synology BeyondCloud Manuale utente

Synology

Synology NVR1218 Manuale

Synology

Synology RX1217 Manuale

Synology

Synology RX1217sas Manuale

Synology

Synology DiskStation DS1815+ Manuale utente

Synology

Synology NAS RS4021xs+ Manuale

Synology

Synology RX415 Manuale utente

Synology

Synology DVA3219 Manuale

Synology

Synology DVA3221 Manuale

Synology

Synology DiskStation DS216+II Manuale utente

Synology

Synology DS116 Manuale utente

Synology

Synology DiskStation DS1517 Manuale

Synology

Synology DS107 Manuale utente

Synology

Synology RackStation RS18017xs+ Manuale

Synology

Synology DS411j Manuale utente

Synology

Synology DS115 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente