Synology DiskStation DS218+ Manuale utente

Synology DiskStation DS218+

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3

Synology DiskStation at a Glance 4

Safety Instructions 5

Chapter 2: Hardware Setup

Tools and Parts for Drive Installation 6

Install Drives 6

Start Up Your DiskStation 9

Add a Memory Module on DiskStation 10

Chapter 3: Install DSM on DiskStation

Install DSM with Web Assistant 12

Learn More 12

Appendix A: Specications

Appendix B: LED Indicator Table

Synology_HIG_DS218+_20170829

Thank you for purchasing this Synology product! Before setting up your new DiskStation, please check the

package contents to verify that you have received the items below. Also, make sure to read the safety instructions

carefully to avoid harming yourself or damaging your DiskStation.

Note: All images below are for illustrative purposes only, and may differ from the actual product.

Package Contents

Main unit x 1 AC power cord x 1

AC power adapter x 1

RJ-45 LAN cable x 1

Screws for 2.5” drives x 10

Before You Start 1

Chapter

4Chapter 1: Before You Start

Synology DiskStation at a Glance

No. Article Name Location Description

1 Status Indicator

Front Panel

Displays the status of the system. For more information, see "Appendix B: LED

Indicator Table".

2 LAN Indicator Displays the status of the network connection. For more information, see

"Appendix B: LED Indicator Table".

3 Disk Indicator Displays the status of the installed drives. For more information, see "Appendix B:

LED Indicator Table".

4 USB 3.0 Port Connect external drives or other USB devices to the DiskStation here.

5 Copy Button

Lights up when you connect a USB device (e.g. digital camera, USB storage

device, etc.). Press the copy button to copy data from the connected USB device

to internal drives.

6 Power Button

1. Press to power on the DiskStation.

2. To power off the DiskStation, press and hold until you hear a beep sound and

the Power LED starts blinking.

7 Fan

Back Panel

Disposes of excess heat and cools the system. If the fan malfunctions, the

DiskStation will emit a beeping sound.

8 USB 3.0 Ports Connect external drives or other USB devices to the DiskStation here.

9 RESET Button

1. Press and hold until you hear a beep sound to restore the default IP address,

DNS server, and passwords for the admin account.

2. Press and hold until you hear a beep sound, then press and hold again until

you hear three beep sounds to return the DiskStation to “Not installed” status

so that DiskStation Manager (DSM) can be reinstalled.

10 LAN Port Connect a network cable here.

11 eSATA Port Connect external SATA drives here.

12 Power Port Connect the AC adapter here.

13 Kensington

Security Slot Attach a Kensington security lock here.

5Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or

aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is

correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected from

the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.

Tools and Parts for Drive Installation

• A screwdriver (only for 2.5” drives)

• At least one 3.5” or 2.5” SATA drive (please visit www.synology.com for compatible drive models)

Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please

back up any important data before installation.

Install Drives

1 Remove the drive bay cover from the front panel.

2 Push the latch upward and pull the handle to remove the drive tray from your DiskStation.

Hardware Setup 2

Chapter

7Chapter 2: Hardware Setup

3 Load drives in the drive trays.

• For 3.5” drives: Remove the fastening panels from the sides of the drive tray. Place the drive in the drive

tray. Then insert the fastening panels to secure the drive in place.

• For 2.5” drives: Remove the fastening panels from the sides of the drive tray and put them in a safe place.

Place the drive in the blue area (shown below) of the drive tray, turn the tray upside down, and then tighten

the screws provided to secure the drive.

4 Insert the loaded drive tray into the empty drive bay. Make sure the side marked with "UP" is facing up, and

insert the drive tray into the empty drive bay. You should hear a click when the tray is locked in place.

5 Repeat the steps above to install the other drive if you have prepared one.

8Chapter 2: Hardware Setup

6 Drives are numbered as shown below.

7 Replace the hard drive bay cover to nish the installation.

Note: If you want to create a RAID volume, we recommend that all installed drives are of the same size to make the

best use of drive capacity.

9Chapter 2: Hardware Setup

Start Up Your DiskStation

1 Use the LAN cable to connect the DiskStation to your switch, router, or hub.

2 Connect the AC adapter to the power port of the DiskStation. Connect one end of the AC power cord to the AC

power adapter, and the other to the power outlet.

3 Press the power button to turn on your DiskStation.

Your DiskStation is now online and detectable from a network computer.

10 Chapter 2: Hardware Setup

Add a Memory Module on DiskStation

The optional Synology memory module is designed for DiskStation memory expansion. Follow the steps below to

install, check, or remove a memory module on your DiskStation.

To install a memory module:

1 Shut down your DiskStation. Disconnect all cables connected to your DiskStation to prevent any possible

damages.

2 Remove the two hard drive trays from the two drive bays. An empty memory slot is located on the inner right

side of your DiskStation.

Important: When you remove the drive trays, you expose sensitive internal components. Avoid touching anything

other than the memory assembly when you remove or add a memory module.

3 Insert the new memory module into the empty slot:

a Align the notch on the gold contacts of the memory module with the notch on the empty slot. Insert the

memory module into the slot. Make sure the module is properly inserted.

b Push down on the memory module with moderate pressure until you hear a click.

Important: Hold the memory module by its edge, and do not touch the gold contacts.

Note: Synology will not provide complete product warranty or technical support if a non-Synology memory module is

used for memory upgrade.

4 Insert the two hard drive trays back into the hard drive bays.

5 Reconnect the cables you removed in step 1, and then press and hold the power button to turn on your

DiskStation.

To make sure DiskStation recognizes the new memory capacity:

1 Install DiskStation Manager (DSM). Please see the next chapter for more information.

2 Log into DSM as admin or a user belonging to the administrators group.

3 Check Total Physical Memory in Control Panel > Info Center.

If your DiskStation does not recognize the memory or does not start up successfully, please make sure that the

memory module is installed correctly.

Indice

Altri manuali Synology Server di archiviazione di rete

Synology

Synology DS223j Manuale utente

Synology

Synology DiskStation DX213 Manuale utente

Synology

Synology RS812RP+ Manuale utente

Synology

Synology 16-disk storage server Manuale utente

Synology

Synology DS216play Manuale utente

Synology

Synology DiskStation Manuale utente

Synology

Synology RackStation RS3412RPxs Manuale utente

Synology

Synology DiskStation Manuale utente

Synology

Synology NAS DS220+ Manuale utente

Synology

Synology DiskStation DS114 Manuale utente

Synology

Synology DiskStation DX213 Manuale utente

Synology

Synology DiskStation DS112 Manuale utente

Synology

Synology DiskStation DS212j Manuale utente

Synology

Synology DiskStation DS712+ Manuale utente

Synology

Synology RackStation RS3617xs Manuale utente

Synology

Synology DS1511+ Manuale utente

Synology

Synology DiskStation DS213air Manuale utente

Synology

Synology RackStation RS814+ Manuale utente

Synology

Synology DiskStation DS212j Manuale utente

Synology

Synology DiskStation DS413j Manuale utente

Synology

Synology DiskStation DS1812+ Manuale utente

Synology

Synology DS2413+ Manuale utente

Synology

Synology DiskStation DX213 Manuale utente

Synology

Synology RackStation RS212 Manuale utente

Manuali Server di archiviazione di rete popolari di altre marche

HP NetStorage 6000 Manuale utente

Seagate

Seagate U10 ST320423A Manuale utente

D-Link

D-Link ShareCenter Pro DNS-1200-05 Manuale utente

Avid Technology

Avid Technology VideoRAID ST Guida di sicurezza

Western Digital

Western Digital My Cloud Home Duo Manuale utente

PrimeArray

PrimeArray 4xxx Manuale utente

Buffalo

Buffalo TeraStation WSS WSH5010N6 Manuale utente

Planex

Planex MZK-NAS01SG Manuale utente

Intel

Intel SS4000-E - Entry Storage System NAS Server Manuale utente

Allnet

Allnet ALL69000 Manuale utente

Adaptec

Adaptec 5325301580 Manuale utente

Motorola

Motorola EXORdisk II Manuale utente

Sony

Sony XDAAI1PK Manuale utente

Cisco

Cisco Linksys NAS200 Istruzioni operative originali

Sans Digital

Sans Digital MR4UT6G Manuale utente

AIC

AIC FB128-LX Manuale utente

Dell

Dell PowerVault NX3500 Istruzioni utente

Buffalo

Buffalo HD-RQSSU2/R5 Manuale utente