Syris v300TM Manuale utente
Gebruikershandleiding (Dutch)
v300™/v600™ Visualisatiesysteem
Manuel d’Utilisation (French)
Système de visualisation v300™/v600™
Benutzerhandbuch (German)
v300™/v600™ Visualisierungssystem
Manuale del Proprietario (Italian)
v300™/v600™ Sistema di Visualizzazione
Manual del Propierario (Spanish)
Sistema de Visualización Serie v300™/v600™
Doc #5002
Revision 3 (July 2004)
v300TM/v600TM Visualization System
International Owner’s Manual
Revision 3 (July 2004) English
v300TM/v600TM Visualization System
Owner’s Manual
2 www.syrisscientific.com
Syris Scientific, LLC
Contact Information
Manufacturer
Syris Scientific, LLC
22 Shaker Road
Gray, Maine, USA 04039
Phone: 207.657.7050
Fax: 207.657.7051
Email: techsupport@syrisscientific.com
Web: www.syrisscientific.com
Service Center Hours:
Monday – Friday
8:00AM – 5:00PM US Eastern Time
Authorized European Representative
CEpartner4U BV
Esdoornlaan 13,
3951DB Maarn
The Netherlands
Phone: +31 (0)343.442.524
Cell: +31 (0)6.516.536.26
Fax: +31 (0)343.442.162
Email: offi[email protected]
Contact: Theo Nusselder / Harry Teirlinck
v300/v600 Owner’s Manual
Doc #5002 (English) 07/2004 3
Introduction
Thank you for purchasing the Syris Scientific v300/v600 Visualization System.
This unique, patented Visualization System is the result of many years of research,
development, testing, and field application. You will enjoy many years of procedural
benefits by following the care and use instruction provided in this manual. Please do
not hesitate to call our service group at 800.714.1374 or 207.657.7050 if we can
be of any assistance in the use of your new system.
Syris Scientific, LLC
Table of Contents
Legend 4
Safety Warnings and Hazards 5
Product Description 6
Product Setup 8
Product Operation 10
Illuminator Replacement 11
Handling, Cleaning, and Storage 14
General Specifications 15
Parts/Accessories List 15
Warranty Information 16
Warranty Registration Card 19
4 www.syrisscientific.com
Syris Scientific, LLC
Legend
The following symbols can be found on components of the v300 and v600
Visualization Systems.
Symbol Title Definition
Attention! Consult accompanying
documents
Dangerous Voltage! Warning, dangerous
voltage present
CE Conformity Mark
Product conforms to the
requirements of applicable
EU directives
On
Off
Direct Current (DC)
Alternating Current (AC)
Volts Direct Current
Amperes
v300/v600 Owner’s Manual
Doc #5002 (English) 07/2004 5
Safety Warnings and Hazards!
General Hazards
Only individuals familiar with the operation and safe use of this system should
operate it.
Keep the system out of reach of children.
Do not walk on or wheel objects over cables and cords.
Do not overextend the cables and cords to prevent premature wear.
Do not drop any component of the system. Physical shock may cause
permanent damage.
Do not clean the components of the system with abrasives or solvents.
Do not autoclave any component of the system.
Do not insert objects into any opening of a component of the system.
Do not direct light from the Illuminator Module at the eyes of anyone, or look
into the Illuminator Module while it is on.
Do not use the system as a light to navigate your environment.
Electrical Hazards
Never immerse any component of the system in water or other liquids.
Use only an approved, grounded outlet.
Do not allow metal objects or body parts to touch electrical connections.
Do not use any other power supply with this system. Damage resulting from
use of a power supply other than the Power Supply Module voids the warranty.
Always use the Power Control Module when using your system. The system
is intended to function with the module to provide a safety interface between
the user and the power supply.
Unplug the Power Supply Module when connecting or disconnecting cables to
any component of the system.
Fire Hazards
Do not operate the system in a flammable or explosive atmosphere.
Do not block any opening of the system. Doing so may cause overheating of
the Illuminator Module.
Avoid operating the system in dusty environments.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6 www.syrisscientific.com
Syris Scientific, LLC
Product Description
This Owners Manual applies to the v300 and v600 Visualization Systems.
A diagram and list of the components of each system are presented here.
v300 Visualization System (Figure 1)
Components Part Number
1 v300 Headgear Z2001-00
v300 Illuminator Z2074-00
2 Upper DC Power Cable Z1762-00
3 Power Control Module Z2076-00
4 Lower DC Power Cable Z2079-00
5 Power Supply Z2077-00
6 AC Power Cable
7 Power Control Module Belt Z1763-00
8 Lens Wipes
Figure 1. v300 Visualization System Components
1
2
3
4
5
6
7
8
v300/v600 Owner’s Manual
Doc #5002 (English) 07/2004 7
v600 Visualization System (Figure 2)
Components Part Number
1 v600 Headgear Z1924-00
v600 Illuminator Z2073-00
2 Upper DC Power Cable Z1762-00
3 Power Control Module Z2076-00
4 Lower DC Power Cable Z2079-00
5 Power Supply Z2077-00
6 AC Power Cable
7 Power Control Module Belt Z1763-00
8 Lens Wipes
IMPORTANT! Syris Scientific is not responsible for any damage that may have
resulted from shipping. Should you find any damage to your system, please
call the shipping company immediately to fill out a claim.
Figure 2. v600 Visualization System Components
1
2
3
4
5
6
7
8
8 www.syrisscientific.com
Syris Scientific, LLC
Product Setup
The following procedures may be used to adjust the headband and complete the
wiring setup for either the v300 or v600 Visualization System.
Headband Adjustment (Figure 3)
1) Begin by adjusting the height of the top strap of the Headgear. This strap is
adjusted by separating the strap and sliding it to a new position. The strap is
secured by locking the plastic buttons on the lower strap into the holes of the
upper strap.
2) Loosen the Headgear headband by pushing the knob at the back of the
headband and turning it counter-clockwise.
3) Position the Headgear on your head, ensuring that the front of the headband
sits comfortably above your eyebrows. If the Headgear sits too high or two low
on your head, repeat step one.
4) Tighten the headband by pushing the knob at the back of the headband and
turning it clockwise.
5) Adjust the position of the Visi-Shield by turning the knobs on either side of the
Headgear. When properly positioned, the magnifying lens should be in your
normal line of sight.
6) It is critical that the top strap of the headgear be adjusted to allow the
rear section of the headgear to fit below the protuberance at the base
of your skull! The system will be extremely uncomfortable without this
adjustment! See Fig. 3 below.
Figure 3. v300/v600 Headgear Adjustment
v300/v600 Owner’s Manual
Doc #5002 (English) 07/2004 9
Wiring Setup (See Figures 1 or 2)
1) Plug the Upper DC Power Cable into the back of the Illuminator Module.
2) Plug the phone plug of the Upper DC Power Cable into either side of the Power
Control Module.
3) Plug the phone plug of the Lower DC Power Cable into the remaining side of
the Power Control Module.
4) Plug the female DIN connector of the Lower Power Cable into the male DIN
connector of the Power Supply.
5) Plug the IEC connector of the AC Power Cord into the IEC port on the Power
Supply.
6) Plug the AC plug of the AC Power Cord into an approved outlet.
After completing the wiring setup procedure, turn the switch of the Power Control
Module to on. You should immediately hear the fan of the Illuminator Module turn
on. To prevent shock to the Illuminator Module, the system is designed to gradually
turn on the Illuminator over a five second period.
IMPORTANT! If there is no evidence of the light or fan when you turn the
system on, immediately turn off the Power Control Module. Check the wiring
setup again.
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Syris Lampada frontale
