Powering The Camera
The dome requires a 12V DC regulated power supply and has a standard 2.1mm
DC socket for connecting the power. It is recommended to use a power supply that is
rated higher than the current consumption of the camera i.e. the current consumption
is 350mA add approximately 30% so use a power supply of 500mA or above.
Accessing The Camera’s Menu
The camera’s menu system can be accessed and controlled in three ways. The fi rst
method is using the in-line joystick on the camera’s video lead. The second method is
to use an up the Co-ax controller which can be done whilst next to the DVR. The third
method is to use RS485 control equipment such as a keyboard or DVR.
Up The Co-ax Menu Control
Up the Co-ax otherwise known as UTC is a method of controlling the cameras OSD
using the Co-ax cable. This is achieved using a REM088 in-line controller. The big
benefi t of confi guring a camera via UTC is that it can be done next to the DVR and
monitor. The Co-ax cable carrying the camera’s video is simply connected to the
controller which is then connected to the DVR. Once the camera has been setup, the
controller can be removed and the camera is then connected to the DVR as normal.
Menu Page 1
Menu Item Options
LENS AUTO / MANUAL
AUTO: 1. TYPE: DC / VIDEO
2. MODE: AUTO / OPEN / CLOSE
3. SPEED: 0 - 255
SHUTTER/AGC AUTO / MANUAL
AUTO: HIGH LUMINANCE
1. MODE: SHUT+AUTO IRIS /
AUTO IRIS
2. BRIGHTNESS: 0 - 255
LOW LUMINANCE
1. MODE: AGC / OFF 2. BRIGHTNESS: X0.25 - X1.00
MANUAL: 1. MODE: SHUT+AGC
2. SHUTTER: 1/50 - 1/10000
3. AGC: 6.00 - 44.80
WHITE BAL ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
ATW: 1. SPEED: 0 - 255
2. DISPLAY CNT: 0- 255
3. ATW FRAME: X0.50 - X2.00
4. ENVIRONMENT: INDOOR /
OUTDOOR
USER1: USER1 WB
1. B-GAIN: 0 - 255 2. R-GAIN: 0 - 255
USER2: USER2 WB
1. B-GAIN: 0 - 255 2. R-GAIN: 0 - 255
MANUAL: 1. LEVEL: 0-255
BACKLIGHT OFF / BLC / HLC
PICT ADJUST 1. MIRROR: ON / OFF
2. BRIGHTNESS: 0 - 255
3. CONTRAST: 0 - 255
4. SHARPNESS: 0 - 255
5: HUE: 0 - 255
6: GAIN: 0 - 255
7: DEFOG: OFF / LOW / MID /
HIGH
Menu page 1 continued on next page.
01246 200 000 systemq.com
For more information on menu options and
what they do see online tip 295
295
4
Options Available
PART CODE DESCRIPTION
CAM533UW Internal 700TVL IR Dome
All specifi cations are approximate. System Q Ltd reserves the right
to change any product specifi cations or features without notice.
Whilst every effort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or non-
performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as defi ned by your local council.
WEE/CG0783SS
Other Products To Consider
Internal 2.8-12mm
Vari-focal 720TVL
Dome Camera With
WDR, UTC & RS485
CAM526UW
Up The Co-ax In-line
Controller
REM088
Specifi cation
FUNCTION SPECIFICATION
CCD 1/3” Sony Super HAD II
Resolution 700TVL
Lens 2.8 - 12mm Vari-Focal
(2M Pixel)
Min. Illumination 0.001 Lux (0 Lux IR On)
IR LEDs 21
IR Range 20m
Video Output 1v p ~ p, 75Ω
Video Connection BNC
Power/Current 12vDC (± 10%) 350mA
Power Connection 2.1mm Socket
S/N Ratio More than 52dB
Gain Control Automatic
Operating Temp. -10°C ~ +50°C
Dimensions 127mm(D) x 95mm(H)
Features
•2.8 - 12mm Vari-Focal Dome
•2 Megapixel Lens
•700 TVL
•21 IR LEDs
•20m IR Range
•Up the Co-ax OSD control
•Wide Dynamic Range
•12V DC
•Digital Noise Reduction
CAM533UW - Vari-focal IR Dome Camera With UTC & WDR
