Using the Appliance
This appliance is able to prepare a huge range of dishes; you may get help from the recipe
book.
Hot Air Frying
1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the pan out of the I fryer (fig.4)
3. Place the ingredients in the basket. (fig.5)
Note: Do not exceed the MAX indication (see section 'settings’ in this chapter), as it may
affect the quality of the food.
4. Slide the pan back into the fryer (fig.6)
Never use the pan without the basket in it.
Caution: Do not touch the pan during and in short-time after use, as it gets very hot.
Only hold the pan by the handle.
5. Turn the temperature control knob to the proper temperature. See section ‘Settings
in this chapter to determine the right temperature (fig.7).
6. Determine the required preparation time for the ingredient (see section Settings in
this chapter).
7. To switch on the appliance, turn the timer knob to the required preparation time
(fig.8).
Add 3 minutes to the preparation time if the appliance is cold
Note: If you want, you can also preheat the appliance without any ingredients inside.
In that case, turn the timer knob for more than 3 minutes and wait until the heating-up light
goes out (after about 3 minutes). Then fill the basket and turn the timer knob to the required
preparation time.
- The power-on light and the heating-up light go on. (fig.9)
- The timer starts counting down the set preparation time.
- During the hot air frying process, the heating-up light comes on and goes out from
time to time. This indicates that the heating element is switched on and off to
maintain the set temperature.
- Excess oil from the ingredients is collected on the bottom of the pan.
8. Some ingredients require shaking halfway during the preparation time (see section
“Settings” in this chapter). By this way, pull the pan out of the appliance by the
handle and shake it. Then slide the pan back into the fryer (fig.10).
Caution: Do not press the button of the handle during shaking. (fig.11)
Tip: You can remove the basket from the pan and shake the basket only to reduce the
weight,. Do like this, pull the pan out of the appliance, place it on a heat-resistant surface
and press the button of the handle.
Tip: If you set the timer half of the preparation time, you have to shake the ingredients
when you hear the timer bell ringing. However, this means that you have to set the timer
again to the remaining preparation time after shaking.
9. When you hear the timer bell, the set preparation time has elapsed. Pull the pan out
of the appliance and place it on a heat-resistant surface.
