Sytech SY-HV27 Manuale utente

SY·HV27

KETTLE

USER

MANUAL

Welcome

Congratulations on the purchase of your new kettle SY-HV27. In order to fully benefit from this product

please read the following instructions carefully. Store this user manual in a safe place for future

references.

Safety instructions

oThis appliance is designed for domestic use only and not for commercial applications

Sytech is not responsible for damage resulting from improper use or from non-

compliance with the user manual.

oThis appliance is designed for boiling water only. Never operate the kettle with any

liquids other than water.

oBefore inserting the mains plug into the socket, ensure that the power voltage and

rating comply with the rated electric parameter shown on the appliance label.

oDo not operate the appliance with wet hands.

oNever allow the base or the bottom of the kettle to make contact with water. Never

immerse the base or the kettle in water. Should any of the above occur, contact

Sytech Service Centre before using it again.

oIn order to comply with safety regulations and to avoid hazards, repairs of electrical

appliances must be carried out by qualified personnel. If repairs are needed, please

contact Sytech Service Centre.

oIf the supply cord is damaged, contact Sytech Service Centre.

oDO NOT operate the appliance if:

The appliance or the power cord are damaged

The appliance has been dropped.

oAlways remove the plug from the wall socket:

After use

In case of any malfunction

Before cleaning

oWhen removing the plug from the wall socket, never pull on the power cord.

oAlways place the appliance away from children.

oChildren must be supervised to ensure that they do not play with the appliance.

oDo not attempt to remove any parts of the housing nor insert any metal objects into

the interior of the appliance.

oTo prevent damage to the power cord, always keep it away from sharp edges or

corners.

oDo not place the power cord over or near hot surfaces.

oDo not expose the appliance to rain or moisture and do not operate the appliance

outdoors or with wet hands.

oOnly use clean cold water, and let the water run for approximately 1-2 minutes before

filling.

oDiscard water after boiling for the first time.

oNever operate the kettle dry. Always ensure the kettle is filled with water before

operating it.

oCAUTION: The appliance operates at very high temperatures; there is a chance of

scalding from the escaping water or steam. Do not touch any part of the kettle except

the handle when the appliance is in use and ensure that the lid is properly closed.

oWhen using the appliance, always pay attention to the water level marking on the

exterior of the kettle. Do not let the water level drop below the minimum level and

never exceed the maximum level.

oIf the kettle is overfilled, boiling water may overflow causing the risk of scalding.

oAlways place the appliance on a firm and uniform surface.

oThis appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instructions concerning use of the appliance by a

person responsible for their safety.

oWARNING: never open the lid when the water is boiling.

oAlways use the kettle with the base provided.

General description

1) Lid

2) Handle

3) On/Off switch

4) Base

5) Function Indicator light

6) Water level indicator

Operation guidelines

Before the first use

oPrior to initial use, clean the kettle by going through several boiling cycles using clean water each time and

filling the kettle to its maximum capacity. The water will reach boiling point after approximately 5 minutes. At

this point the appliance switches off automatically. Whilst the water is boiling, a red light will indicate that the

water is boiling, once this has finished, the red light will turn off to indicate that the boiling process has

finished.

Using the kettle

oPlace the heating base on a firm and uniform surface

oPour the desired amount of water into the kettle and make sure the lid is closed properly. The water level can

be measured by the level mark on the exterior of the appliance. Once the appliance is functioning, do not

touch any part other than the handle.

oPlace the kettle carefully onto the base.

oInsert the plug into the wall socket.

oTurn on the appliance to start the heating process; a red light will turn on inside the unit showing that it is

operating.

oAs soon as the water has boiled, the appliance will switch off automatically and the light will turn off. If a lower

water temperature is desired, the appliance can be switched off manually as well.

oThe water may now be poured safely through the spout into another container.

Safety cut-out feature

oThe kettle is equipped with a safety cut out feature. Should the kettle have no water and the switch is turned

on, the switch will automatically turn off.

oIn such cases, unplug the appliance and reuse it after 30 seconds.

Decalcifying

oIf the appliance switches off before reaching boiling point, it is a sign that decalcifying is needed.

oAny regular de-scaling agent may be used, provided that the relevant instructions are observed.

oTo clean the kettle thoroughly after decalcification, let it go through several boiling cycles using clean water

each time. Rinse the kettle with clean water afterwards and let it dry before re-use.

Cleaning and care

oAlways ensure that the plug is disconnected from the wall socket, and that the unit has fully cooled down

before cleaning the kettle.

oDo not use abrasive cleaning products.

oDo not immerse the base or kettle in any liquids. To clean the body (exterior), use a slight moist lint-free

cloth.

oIt is advisable to remove lime deposits from the kettle at regular intervals.

Specifications

Supply Voltage: 220~ 50Hz,

Power: 1500W.

Capacity: 1.8 Litres

Material: Plastic

Environment

This marking indicates that this product should not be disposed with other household wastes

throughout the EU. To prevent possible harm to the environment or human health from

uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material

resources. To return your used device, please use the return and collection systems or contact the

retailer where the product was purchased. They can take this product for environmental safe

recycling.

Declaration of Conformity

Manufacturer Name: Satyatrade S. L.

Address: Pol. Ind. La Raya. C/ Guadalquivir, 2.

Camarma de Esteruelas, 28816 Madrid

Tel: 902 430 967

Fax: 91 8864285

NIF: B83254763

Manufacturing country: China

Description: Water kettle

Sytech® SY-HV27 complies with the following directives:

EMC Standard: Directive: 2014/30/EU

LVD Standard: Directive: 2014/35/EU

LFGB Standard: EN13130-1:2004

ROHS standard: 2011/65/EU Restriction of Hazardous Substance

Signed: Ajeet Nebhwani Utamchandani

Sole Administrator

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Sytech Bollitore

Sytech

Sytech SY-HV10 Manuale utente

Manuali Bollitore popolari di altre marche

IKEA

IKEA UPPHETTA Manuale utente

Krups

Krups BW500B55 Manuale utente

Clas Ohlson

Clas Ohlson KE7086-BH Manuale utente

Brock

Brock WK 0902 GR Manuale utente

inventum

inventum CBW010 Manuale utente

Westfalia

Westfalia Retro 81 48 86 Manuale utente

Ovente

Ovente KS88 Series Dimensioni

HUSLOG

HUSLOG AK-0832 Manuale utente

Saturn

Saturn ST-EK840 Manuale utente

Wilfa

Wilfa TK-1200B Manuale utente

HOME ELEMENT

HOME ELEMENT HE-KT150 Manuale utente

Breville

Breville Crystal Clear BKE290 Manuale utente

ECG

ECG RK 1745 Manuale utente

cecotec

cecotec THERMOSENSE 600 TOUCH BLACK Manuale utente

Kalorik

Kalorik JK 39825 Manuale utente

tomado

tomado TM-1971 Manuale utente

Cosori

Cosori CS108-NK Manuale utente

Electrolux

Electrolux E7K1-6BP Manuale utente