Tack life T6 Manuale utente
User Manual
Jump Starter
Model: T6
English
Deutsch
Français
Español
Italiano
日本語
01~07
08~15
16~23
24~31
32~39
40~46
Contents
USER MANUAL
Thank you for choosing Tacklife T6 jump starter ! Always follow the basic security
instructions. Please carefully keep this manual for further reference.
A. PARTS AND FUNCTIONAL DESCRIPTION：
1.
2.
3.
4.
5.
6.
7.
8.
9.
12V Jump start socket
15V 1A input port
12V 10A output port
USB 5V 2A output port
USB Quickcharge output port
LED Switch
LED Flash Light(SOS)
Indicator
Switch
- 01 -
1
2
3
45
6
7
9
8
300PSL
12VAIR COMPRESSOR
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
15V 1A input port
Wall Charger
Car Charger
12V Jump start socket 12V 10A output port
USB output port
Intelligent jumper
cable
For 12V Automotive
Products
B. INDICATOR DESCRIPTION
Press the switch button, the indicators will display electricity as follow:
During charging, the indicators flash cyclically and show real-time power. All lights will
go out when it is fully charged or the charging is paused.
C.RECHARGING INSTRUCTIONS:
1. Recharging via wall charger
Insert one end of the wall charger into the 15V/1A input, then plug the other end into
the universal socket.
2. Recharging via car charger
Insert one end of the car charger into the 15V/1A input, then plug the other end into
your car cigarette lighter socket,
Power indicator light
T6 power
no one
0%
one
20%
two
40%
three
60%
four
80%
five
100%
- 02 -
Jump Start 12V Vehicle Instruction:
1.
2.
3.
Connect the blue plug of jumper cable to the host and make
sure the Cable Indicator is off.
Connect jumper cable correctly to the vehicle battery: red
clamp to the positive (+) battery terminal, black clamp to the
negative (-) battery terminal.
Operate as following instruction of the Cable Indicator:
BOOST
reverse correct
Beep,Be ep
Beep,Be ep
GREEN LIGHT on:
Connection is correct and the
circuit is working, can be used
as emergency start.
GREEN LIGHT blinking with
buzzing:
Voltage of vehicle battery is
low. Please press the “BOOST”
button and start car within 30s
after GREEN LIGHT becomes
solid.
RED LIGHT on with buzzing:
Connection is reversed. Please
reconnect and wait to start the
unit with GREEN light on.
No Lights on, No Buzzing:
Vehicle battery might have been
completely damaged. Please
make sure the connection is right,
then press the "BOOST" button
and start your vehicle within 30s
after the GREEN light becomes
solid.
- 03 -
4.
5.
Charging Cell Phone or Tablet Instruction:
1.
2.
3.
4.
Supply Power for 12V Automotive Products
1.
2.
3.
Switch Instructions:
One click to switch on after correctly connecting jumper cables or charging cables. The
unit will automatically shut off after 30s when not using.
LED Flash Light Instructions:
Press the LED switch to light on LED flash light. Then hold the button slightly to appear
3 modes of LED light in order (normal. strobe. SOS. off).
Turn the vehicle ignition switch to START position.
Remove the jumper cable after the vehicle being started.
Select appropriate charging cables for your mobile devices.
Connect one end to your device and the other end to the 5V/2A or Quickcharge port
of the unit.
Press switch button softly to begin your charging.
Tips: the Quickcharge port has faster charging speed and better adaptability for
iPhone/iPad/iPod.
Plug one end of the cigarette lighter adapter into your auto product.
Plug the other end of the adapter into the 12V/10A output port on the unit.
Press the switch button to starter power supply.
- 04 -
D. PARTS LIST:
E.TECHNICAL SPECIFICATIONS：
Size: 6.3 x 3 x 1.6 inches
Weight: 1.16 pounds
Capacity: 16500mAh/61Wh
Output: 5V/2A, 5V/9V, 12V/10A, 12V Jump Starter Socket
Input: 15V/1A
Full Charge Time: 5h
Starting Current: 300A
Peak Current: 600A
Operating Temperature: -20°C(-4℉) ~ 60°C(140℉)
F. FAQ:
1.
2.
3.
4.
5.
6.
number
①
②
③
④
Parts Name
Host
Micro USB Cable
Wall Charger
Car Charger
Quantity
1
1
1
1
number
⑤
⑥
⑦
Parts Name
Inttelligent Jumper Cable
Cigarette Lighter Adapter
User Manual
Quantity
1
1
1
How to turn off this unit ?
The product has intelligent detecting function, once there is no loading, or electrics
charging is end, it will automatically shut off to save power.
How long dose it take to recharge it fully ?
Approx 5 hours through the 15V/1A input.
How many times can this unit charge a cellphone ?
Take iPhone6 as an example, this unit can recharged it 7 times from no power to full
charged.
How many times can this unit jump start vehicles after a full charging ?
Approx 30 times.
What's the service time of Tacklife T6 jump starter ?
Usually 3-5 years in normal condition.
How long can this battery keep powerful after a full charging ?
This T6 jump starter is scientifically designed to be stored for 6-12 months without
using. However, in order to extend the service time, it is recommended to recharge
it every three months.
- 05 -
G. TROUBLE SHOOTING:
If the following Remedies can not solve your problem, please stop using T6 and
contact the merchant who you bought it from.
H. COMPOSITIONS AND AMOUNT OF TOXIC AND HARMFUL
SUBSTANCES IN T6 JUMP STARTER:
I. Warning:
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
Finding
No response
when pressing
the switch button.
Cause
Low voltage protection of
T6 cut off the circuit
Remedies
Recharge the unit to activate it.
TOXIC AND HARMFUL SUBSTANCES
Pb
O
Hg
O
Cd
O
Cr（Vi）
O
PBB
O
PBDE
O
O：Indicate all homogeneous materials’hazardous substances
content are below the MCV limit specified in the Standard 2002/95/EC(RoHs).
Read the user manual carefully before using this unit.
Jump start 12V vehicles only. DO NOT hazard to use it to aircraft or ship that has
overloaded engines.
DO NOT use this unit if any clamp or cord is damaged.
DO NOT use it in place of a vehicle battery.
DO NOT use it as a battery charger.
Never leave it connected to the vehicle battery after cranking your car successfully.
Use the jumper cable provided with the unit only.
Make sure the BLUE plug of the jumper cable is fully inserted into the jumping
socket. Otherwise, the BLUE plug would be melted.
Make sure all the battery connections are clean and well connected before
jumping start. If the vehicle battery is too dirty or over corroded, the unit may not
work as so powerful.
DO NOT jump start more than 3 times in a row. It could damage the unit by
overheat. Let it cool down for 2 minutes before next round.
DO NOT connect the positive and negative pins together when it is power on.
Only jump start when at least 3 indicators are lit.
DO NOT use by young or infirm persons without supervision.
DO NOT use as a toy.
DO NOT immerse the product in water.
DO NOT use the product in explosive atmospheres, such environment with
flammable liquid, gas or dust.
DO NOT disassemble and modify this product. Only a professional technician may
repair it.
DO NOT expose this product to extreme heat or fire.
In order to avoid a short circuit caused by metals incautiously fall into the hole,
please remove your ornaments such as rings, necklace bracelets before using it.
DO NOT drop the unit. Please have it checked by a technician if it is badly broken.
DO NOT store in locations where the temperature may exceed 70°C.
Charge at ambient temperature between 0°C and 60°C .
Only charge it with the provided charger in the package.
DO NOT use the unit to jump start a vehicle while charging the internal battery.
Please immediately put it to recycle if this unit start to leak liquid.
Battery leakage can occur under extreme conditions. Please do not directly touch
it by hands when this condition happens. If there is direct skin contact, please
immediately wash your hands with soap. If it comes to your eyes, you must wash
your eyes with running cold water for 10 minutes and go to hospital immediately.
This unit contains lithium battery, at the end of the product life, please dispose it
according to your local regulation.
- 06 -
Read the user manual carefully before using this unit.
Jump start 12V vehicles only. DO NOT hazard to use it to aircraft or ship that has
overloaded engines.
DO NOT use this unit if any clamp or cord is damaged.
DO NOT use it in place of a vehicle battery.
DO NOT use it as a battery charger.
Never leave it connected to the vehicle battery after cranking your car successfully.
Use the jumper cable provided with the unit only.
Make sure the BLUE plug of the jumper cable is fully inserted into the jumping
socket. Otherwise, the BLUE plug would be melted.
Make sure all the battery connections are clean and well connected before
jumping start. If the vehicle battery is too dirty or over corroded, the unit may not
work as so powerful.
DO NOT jump start more than 3 times in a row. It could damage the unit by
overheat. Let it cool down for 2 minutes before next round.
DO NOT connect the positive and negative pins together when it is power on.
Only jump start when at least 3 indicators are lit.
DO NOT use by young or infirm persons without supervision.
DO NOT use as a toy.
DO NOT immerse the product in water.
DO NOT use the product in explosive atmospheres, such environment with
flammable liquid, gas or dust.
DO NOT disassemble and modify this product. Only a professional technician may
repair it.
DO NOT expose this product to extreme heat or fire.
In order to avoid a short circuit caused by metals incautiously fall into the hole,
please remove your ornaments such as rings, necklace bracelets before using it.
DO NOT drop the unit. Please have it checked by a technician if it is badly broken.
DO NOT store in locations where the temperature may exceed 70°C.
Charge at ambient temperature between 0°C and 60°C .
Only charge it with the provided charger in the package.
DO NOT use the unit to jump start a vehicle while charging the internal battery.
Please immediately put it to recycle if this unit start to leak liquid.
Battery leakage can occur under extreme conditions. Please do not directly touch
it by hands when this condition happens. If there is direct skin contact, please
immediately wash your hands with soap. If it comes to your eyes, you must wash
your eyes with running cold water for 10 minutes and go to hospital immediately.
This unit contains lithium battery, at the end of the product life, please dispose it
according to your local regulation.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
- 07 -
Multifunktionelle Auto Notstart Leistung
Anleitung
Vielen Dank für die Verwendung von Smart Start-Stromversorgung. Bevor Sie dieses
Produkt benutzen, lesen Sie bitte die Anweisungen sorgfältig durch, und Sie sollen die
Anleitung für zukünftige Referenzen aufbewahren.
A. Einzelteile und Funktionen anzeigen
1.
2.
3.
4.
5.
6.
7.
8.
9.
Auto Start-Anschluss
15V 1A Eingangsbuchse
12V 10A Ausgangsbuchse
USB5V 2A Ausgangsbuchse
Schnelle USB-Aufladeausgang
LED Schalter
LED Taschenlampe(Lichter für Hilfe)
Batterieanzeige
Schalter
- 08 -
1
2
3
45
6
7
9
8
Indice
Lingue:
Altri manuali Tack life Avviamento remoto
