Tactacam 4.0 Manuale utente
(844) 482-2822
WWW.TACTACAM.COM
WWW.TACTACAM.COM
TACTACAM.COM
MODELS: 4.0 , 3.0 AND 2.0
TACTACAM QUICK START GUIDE
1
Congratulations on your new Tactacam
This is a Quick Start Guide to show you the basics of your new Tactacam. The full
user manual along with video tutorials are conveniently located on the included SD
card. You can nd the SD card in the SD card slot of your new Tactacam. You can
also visit Tactacam.com for the most up-to-date info on your Tactacam.
Please make sure you register your camera within 10 days of purchase at:
https://www.tactacam.com/warranty-registration/
Also make sure you follow us on Facebook, Instagram and Twitter for the latest
updates from the Tactacam team:
https://www.facebook.com/tactacam
https://www.instagram.com/tactacam #Shareyourhunt
https://twitter.com/tactacam
*Make sure to share your hunt with us by submitting your videos at: https://www.tactacam.com/share/
To download this user manual visit tactacam.com/support
(844) 482-2822
TACTACAM 2.0
4.0 , 3.0 AND 2.0
GET TO KNOW YOUR TACTACAM
1. 360° weatherproof mic
2. 2.5 hour record time on
a single charge
3. 2 hour record time on a
single charge
4. True Full HD
1080p-30fps
3x zoom optimized for
distance
5. True Full HD 2.7k
@30fps
5x zoom optimized for
distance
6. True Full HD 2.7k
@30fps
5x zoom optimized for
distance
7. “Quick change” Mode
8. “Quick change” Mode/
WiFi button
9. Power Button/One
touch record with
vibration indicator
10. Battery indicator lights
1
2
6
89
10
5
79
10
4
9
12
3
TACTACAM 3.0
TACTACAM 4.0
2
TACTACAM.COM
4.0 , 3.0 AND 2.0
TACTACAM QUICK START GUIDE
Before you start lming, charge your Tactacam completely and select the proper
SD Card: The included 8GB micro SD card is not compatible with 2.7k
No damage occurs to the camera or battery if used before being fully charged.
Unlock the back cap and then twist counter-clockwise to access the rear
of the camera.
(Tactacam 2.0 Unscrew the back cap.)
You should see the Following.
SD card slot and SD Card (Included 8GB SD Card not compatible with 2.7k mode)
USB port (Charging and Downloading)
Removable battery (Up to 2.5 hours continuous recording time)
Mini HDMI output (4.0 and 3.0 Only)
List of the preset modes for your camera (4.0 and 3.0 Only)
Your Tactacam’s serial number.
(Note Tactacam 2.0’s serial number is located in the Waterproof cap only.)
12
1
2
5 6
4
3
12
1
2
3
4
5
6
3
(844) 482-2822
CHARGE YOUR TACTACAM
To Charge, plug the supplied USB cord into your Tactacam USB port after
plugging the supplied charger into a wall socket. The camera charge status
light (red) turns on during charging and turns off when charging is complete.
When charging the camera with a computer, be sure that the computer is
connected to a power source then plug the supplied USB cord into one of
your computer’s USB ports. If the camera status lights (red) do not turn on to
indicate charging, use a different USB port.
For more battery information, visit tactacam.com/support
Mini USB
4
TACTACAM.COM
SD CARD + DOWNLOADING
The included microSD is 8GB and will hold only short amounts of
HD video and is not recommended for 2.7k video. On the SD, card
you will nd a video tutorial along with the user manual pre-installed.
Before extended hunts we recommend upgrading the card with one
of the recommended SD cards for your camera. We do offer 32 and
64 GB micro SD cards: www.tactacam.com/product-category/acces-
sories. (64GB cards for 4.0 and 3.0 only)
NOTE: You should always format your SD cards before using in
your Tactacam for the rst time or after it has been installed in
any other device. Only use high quality class 10 or higher micro
SD cards. Tactacam SD cards, Lexar, or SanDisk Ultra Extreme
are recommended.
Please see more info on SD cards @ tactacam.com/support
Use one of the following methods to access the video tutorial and full user
manual located on your microSD card.
1. Using the provided USB cord connect your Tactacam to your
computer. Power on your camera to allow the computer and camera to
communicate. (3.0 and 4.0 models only). You will see an icon on your
computer desktop (usually named TACTACAM). Open it and download
the videos and user manual to your computer. Any videos taken with
your Tactacam will be in the “Video” folder.
2. Remove your microSD card from your Tactacam and insert
the microSD card into the provided microSD card adapter.
5
(844) 482-2822
SD CARD + DOWNLOADING
REFORMATTING YOUR CARD
GETTING TO KNOW YOUR TACTACAM:
6
Insert the microSD card adapter into your computer which will
allow you to use the standard SD card reader on your computer
to access the les.
If you haven’t downloaded the included video tutorial and user manual
from the SD card and saved in a safe place, please do so for future
reference. Next reformat your SD card before use. When you refor-
mat a SD card it erases all data on the card. If you need assistance
reformatting your card see the following:
For a Mac: How to Format an SD Card With a Mac (with Pictures) |
eHow
For a PC: Formatting a memory card, ash drive or device using a PC
NOTE: It is Best to format your SD cards before using and only
use SD cards approved by Tactacam for Tactacam cameras. When
formatting your SD card use FxFAT. For a list of the recommended
microSD cards, visit tactacam.com/support
NOTE: Use care when handling memory cards. Avoid liquids, dust,
and debris. As a precaution, power off the camera before inserting or
removing the card. Check manufacturer guidelines regarding use in
acceptable temperature ranges.
TACTACAM.COM
POWERING ON AND RECORDING
GETTING TO KNOW YOUR TACTACAM:
7
1. Push the Rec/Power button. You will
feel the camera vibrate 2 times and see a
blinking green light coming from the rec/
power button. The green LED must be
blinking for the camera to be recording.
Note: Tactacam 2.0 will vibrate 1 long
and 2 short times when powered On. The
process takes approximately 3 seconds.
(Note: if light does not begin to ash make
sure your sd card is installed, formatted
and not lled with videos)
2. To pause your recording quickly push
the Rec/Power button. The camera will
vibrate 1 time and the green light will stop
blinking.
3. To power your camera completely off
just push and hold the Rec/Power button
for 4 sec.
4. The camera automatically will power
off to save battery when not recording (left
in pause mode) after 3 min (Tactacam 2.0
powers off after 5 min)
(844) 482-2822
POWERING ON AND RECORDING
GETTING TO KNOW YOUR TACTACAM:
8
“Quick Change” video modes. (Tactacam 4.0 and 3.0 only)
Three preset video modes
Green = Standard recording in 2.7K @ 30fps
Blue = 5x zoom mode in 1080 @ 60fps to get you even closer to
the subject. This is the recommended setting for best lming.
Light Blue = Slow motion recording at 120fps provides smooth
playback of your shot placement. Best results with lighted arrow
nock or tracer round ammo.
BLACKOUT MODE (Tactacam 4.0 and 3.0 only)
To enter Blackout mode press the MODE button when the camera is
recording.
NOTE: You can only enter and exit the Blackout mode when the camera is recording.
When in Blackout mode (4.0/3.0 models only) your camera functions
will remain the same, however all lights on the camera will turn off.
You will only feel the camera vibrate. 2 vibrations = recording and 1
vibration = pause. If at any time you get confused just push and hold
the rec/power button for 4 sec and the camera will power off.
NOTE: When using Black out mode periodically conrm you are in the correct mode/
Recording/ Paused to avoid missing your footage opportunity. The battery indicator light
will blink to inform you of LOW status (last 5%) of the battery when in Blackout mode.
TACTACAM.COM
DOWNLOAD YOUR APP: 4.0
GETTING TO KNOW YOUR TACTACAM:
9
(WiFi 4.0 only)
Note: your camera funtions can only be controlled by your phone when your are connected to the
WiFi. This setting lets you connect your camera to the Tactacam App for mobile remote connection.
When wireless is on, a blue LED shows by the wireless status icon just in front of the rec/power
button. The blue wireless LED will blink when not connected for 1 min then power itself off. Once
connected the blue LED will go solid. The WiFi will remain connected the life of the battery. How to
get connected?
1. Download the Tactacam App
Download and open the Tactacam APP from your App store on your Phone or Tablet. Follow the
App’s on-screen instructions.
2. Connect to your Tactacam
To turn on your Tactacam WiFi = While your Tactacam is in pause mode push and hold the Mode
Button for 2 sec you will see the blue LED indicator light turn on and start blinking.
3. From your mobile device select the Tactacam WiFI (There is no default password for your
Tactacam WiFi.)
4. Open the Tactacam App and connect to your Tactacam.
Android users: You will need to download a .MOV video player for your device, we recommend MX
Media player you can nd it in the Android app store
5. Turn WiFi Off - Press and hold the WiFi/Mode button for 4 sec. This will Turn off your WiFi and
disconnect you from your mobile device.
For complete pairing instructions, visit tactacam.com/support.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Tactacam Fotocamera d'azione
