Tainet WANpro 2000 Manuale utente
V1.5 07008-00032 2004/03/24
TAINET
WANpro 2000
WAN ACCESS ROUTER
USER'S MANUAL
The Professional Partner
TAINET COMMUNICATION SYSTEM CORP.
Headquarters:
No. 25, Alley 15, Lane 120, Sec. 1. Nei-Hu Rd.,
Taipei 114, Taiwan, R.O.C.
TEL: 886-2-26583000
FAX: 886-2-26583232
Beijing Branch:
3F, A Building, 113 Zhi Chun Lu,
HaiDian District, Beijing, China
Zip Code: 100086
Tel: 86-10-62522081~87
Fax: 86-10-62522077
Copyright © 1999 Tainet Communication Corporation.
All rights reserved.
Printed in Taiwan R.O.C.
Notice
This document is protected by the international copyright law. No part of this
publication may be reproduced by any means without the permission of Tainet
Communication Corporation.
TAINET is a registered trademark, and “WANpro 2000” is a trademark of
Tainet Communication Corporation.
Other product names mentioned in this manual are used for identification
purposes only and may be trademarks or trademarks of their respective
companies.
The information provided from Tainet Communication Corporation is
believed to be accurate. Any changes and enhancements to the product and to
the information thereof will be documented and issued as a new release to this
manual.
FCC NOTICE
This equipment has been tested to comply with limits for a digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with instruction manual, may cause harmful interference to
radio communication.
If the equipment does cause harmful interference to radio or television
devices, the user is encouraged to try to correct the interference by one or
more of the following advises:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
The FCC Rule is available from the U.S. government Printing Office,
Washington, DC 20402, Stock NO. 004-00000345-4.
The shielded RS-232 cable is to be used in order to ensure compliance with
FCC Part 15, and it is the responsibility of the user to provide and use
shielded RS-232 cable from NTU to personal computer.
We will not commit to repair this unconditional fault resulting from the user.
The warranty issue will only protect for right operations mentioned in the
manual, and extra charge for this fault might be noticed if necessary.
Any changes of modifications not expressly approved by the grantee
of this device could void the user’s authority to operate the
equipment.
HOW TO USE THIS MANUAL
This section gives you some ideas about how to use this manual effectively.
It includes brief description of the summary chapters and the symbol used
inside the manual.
Summary Chapters
Section Description
Chapter 1 Quick Start.
Describe quick installation for Tainet’s WANpro 2000
device
Chapter 2 Introduction
General introduction to Tainet’s WANpro 2000 device
Chapter 3 Configure and Monitor Via Front Panel
Provide the procedures to setup the user interface and
using LEDs, status to monitor the device via LCD Front
Panel.
Chapter 4 Configure and Monitor Via PCs or Terminals
Provide the procedures to setup the user interface and
using LEDs, status to monitor the device via PCs or
Terminals.
Provide information to view and check the network
conditions.
Appendix A Interface Specifications & Cable Diagrams
Describe the port connectors and interface information.
Appendix B Technical Specifications
Contains physical, electrical and mechanical
specifications.
Glossary Define acronyms and terms used in this manual.
Symbols Have Been Used
There are eight types of the messaging symbols used inside the text. By the
way, users will be warned in conditions during chapters.
The questions from the section
The extra information provided for the user
Stop here to check conditions
Users are prohibit
Break time
How to contact
Warning messages
WARRANTY AND SERVICE INFORMATION
If there is any question, contact your local sales representative,
service representative, or distributor directly for any help needed.
You might use one of the following methods:
nVia the Internet: visit our world wide web site at
http://www.tainet.net
nVia the Sales Representatives:
HQ
No. 25, Alley 15, Lane 120, Sec. 1 Nei-Hu Rd., Taipei, Taiwan
TEL: (886) 2-2658-3000 FAX: (886) 2-2658-3232
URL: http://www.tainet.net
Moscow Branch
111024, Shosse Entuziastov, Building 14, Room 425, Moscow, Russia
TEL: (7) 095-7850-377 FAX: (7) 095-7850-378
URL: http://www.tainet.ru
Beijing Branch
3F, A Building, 113 Zhi Chun Lu, HaiDian District , Beijng , China
Zip Code: 100086
TEL: Tel: 86-10-62522081~87 FAX: 86-10-62522077
URL: http://www.tainet.com.cn
Guangzhou Representative Office
TEL: (86) 20-8758-5976, 8759-0695 FAX: (86) 20-8758-5976
Shanghai Representative Office
TEL: (86) 21-6487-6066, 6427-0809 FAX: (86) 21-6487-5825
Chengdu Representative Office
TEL: (86) 28-522-4651, 522-4652 FAX: (86) 28-522-4652
CONTENTS
Copyright
FCC Notice
How to Use This Manual
CHAPTER 1 QUICK START...................................................................1
1.1 How to Begin – the first step for the user.....................................2
1.1.1 Unpacking .........................................................................2
1.1.2 Connecting Power to the Device........................................3
1.1.3 Connecting to the Network ................................................3
1.2 How to Operate and Setup Internet Applications..........................4
1.3 How to Operate and Setup Intranet Applications..........................6
CHAPTER 2 INTRODUCTION...............................................................1
2.1 Tainet’s WANpro 2000................................................................2
2.1.1 Features.............................................................................2
2.1.2 Specifications ....................................................................2
2.2 Applications................................................................................4
CHAPTER 3 Configure and Monitor Via Front Panel............................... 1
3.1 Font Panel ...................................................................................2
3.2 Identify LEDs Light Status..........................................................2
3.3 Rear Panel...................................................................................3
3.4 Front Panel Operation..................................................................3
CHAPTER 4 Configure and Monitor Via PCs or Terminals ...................... 1
4.1 Connect WANpro 2000 to PCs or Terminals................................2
4.2 The ‘Configuration’.....................................................................4
4.3 Main Menu:.................................................................................6
4.4 Configuration Menu ....................................................................6
4.4.1. System...............................................................................7
4.4.2. PPP..................................................................................10
4.4.3 FR....................................................................................11
4.4.4. RIP_Setting .....................................................................12
4.4.5. Routing_Table .................................................................14
4.4.6. Security ...........................................................................17
4.4.7 NAT.................................................................................20
4.4.8 Filter................................................................................23
4.4.9 DHCP..............................................................................26
4.5 Monitor Menu ...........................................................................28
4.5.1 Current_Configuration.....................................................28
4.5.2 Routing_Table .................................................................29
4.5.3 ARP_Table ......................................................................31
4.5.4 Statistics ..........................................................................32
4.5.5 NAT_Buffer.....................................................................35
4.5.6 DHCP..............................................................................36
4.6 Device_Control .........................................................................37
4.6.1 Warm_Start......................................................................37
4.6.2 Restore_Default...............................................................37
4.7 Diagnosis Menu.........................................................................38
4.7.1 Ping.................................................................................38
Appendix A Interface Specifications & Cable Diagrams............................ 1
A1. WAN Interface PinOut List (Female Connectors)........................2
A2. Console Cable RJ-45 – DB-25 Connector PinOut........................3
A3. LAN Interface RJ-45 Connector PinOut......................................3
Appendix B Technical Specifications........................................................ 1
B1 LAN Interface .............................................................................2
B2. WAN Interface ............................................................................2
B3. CONSOLE Interface ...................................................................2
B4. Power..........................................................................................2
Glossary...................................................................................................1
FIGURES
Figure 1.1A Front Panel of the Tainet’s WANpro 2000....................................... 1-2
Figure 1.1B Rear Panel of the Tainet’s WANpro 2000 ........................................ 1-2
Figure 1.2 The Internet Connection over PPP................................................... 1-4
Figure 1.3 The Internet Connection over Frame Relay...................................... 1-5
Figure 1.4 The Intranet Connection over PPP................................................... 1-6
Figure 2.1 Applications to xDSL Series Modem............................................... 2-4
Figure 3.1A Front Panel of the Tainet’s WANpro 2000....................................... 3-2
Figure 3.1B Rear Panel of the Tainet’s WANpro 2000 ........................................ 3-3
Figure 3.2 General Initialized Procedures of the WANpro 2000 Device........... 3-4
Figure 3.3 LCD Menu Tree.............................................................................. 3-6
Figure 4.1 The Console Port Connection to PCs or Terminals .......................... 4-3
Figure 4.2 Main Menu Tree.............................................................................. 4-5
Figure 4.3 Example of WANpro 2000 application............................................ 4-7
Indice
Altri manuali Tainet Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza