Tait TWX500 Manuale utente
Important Safety Information
Caution:For safe operation, storage and maintenance information, read all included safety
documentation. Use only Tait approved accessories and software.
Do not operate this device while charging.
Do not use this device while operating a moving vehicle.
Programming and maintenance must be carried out by a certified Tait technician. Do not
open the device. Contact your Tait representative for more information.
Not suitable for use in an explosive environment.
Product Overview
EN
1 Lanyard hook
2 Antenna
3 Home/Power button
4 Speaker
5 SIM card slot
6 USB-C Charging
7 Function key
8 Press To Talk (PTT)
9 Microphones
10 LED
11 Selector dial
12 3.5mm audio jack
13 Belt clip
14 Emergency button
15 OLED display
4 dBm
What's Included
n 1 x TWX550 Tait Wearable device
n 1 x USB-C charging cable
n 1 x belt clip
n 1 x Safety and Compliance Manual
n 1 x Quick Start Guide
Frequencies and Transmitters
Region LTE FDD WCDMA
Asia Pacific 1, 3, 5, 8, 9, 18, 19, 26, 28 1, 5, 6, 8, 19
Europe 1, 3, 7, 8, 20, 28A 1, 3, 8
North America 2, 4, 5, 12, 13, 14, 66, 71 2, 4, 5
Mode Maximum
Output
LTE
WiFi (2.4GHz)
WiFi (5GHz)
Bluetooth®
BLE
Battery
This product uses a lithium-ion battery. The battery is sealed and inaccessible. It is not user-serviceable.
25.3 dBm
16.8 dBm
12.9 dBm
4.5 dBm
Getting Started
Attaching the Belt Clip
n Ensure either cover or connector is fitted
n Push the top of the belt clip onto the bottom of
the clip holder
n Push the battery clip up until it clicks into place
The connector can be fitted with the lanyard
hook facing up or down as preferred.
Charging the Device
Before using the device, it should be charged.
n Insert the USB-C cable and connect to a USB power supply capaple of at least 2A , or
n dock the device in a Tait charging dock (optional).
Turning On/Off
n On - push the Home button
n Off - Hold the Home button down or select Menu > Power > Shutdown
n Restart - select Menu > Power > Reboot
Basic Care
n Do not leave the wearable in extreme temperatures
n Do not immerse in water Use a moistened or anti-static cloth to clean
n Do not use a dry or electrostatically charged cloth
Viewing Compliance Information
Select Menu > System > Regulatory Information
DRAFT - Issue 01 - November 2021
TWX500
Safety and Compliance Information
Important: Read carefully before use. Keep for future reference.
Forthelatestuserdocumentation,visithttps://partnerinfo.taitradio.com/.
Important: Veuillez lire ces informations avec attention avant toute utilisation. Conservez-les à titre
de référence.
Pouraccéderauxmanuelsd'utilisationlesplusrécents,veuillezvisiterhttps://partnerinfo.taitradio.com/.
Wichtig: Bitte dieses Dokoment vor der Benutzung lesen und als zukünftige Referenz aufbewaren.
DieaktuelleBenutzerdokumentationfindenSieaufhttps://partnerinfo.taitradio.com/.
Importante: Leia com atenção antes de usar. Guarde para referência futura.
Paraadocumentaçãomaisrecentedousuário,porfavorvisitehttps://partnerinfo.taitradio.com/.
Leer detenidamente antes de usar. Mantener para referencia futura.
Paraverladocumentaciónmásrecienteparaelusuario,visitehttps://partnerinfo.taitradio.com/.
2
Tait International Ltd - November 2021
3
Tait International Ltd November 2021
Tait Communications
Corporate Head Office
Tait International Limited
P.O. Box 1645
Christchurch
New Zealand
Imported into the EU
by:
Tait Communications
GmbH
Stipcakgasse 40
1230 Vienna
Austria
Imported into the UK by:
Tait Europe Limited
Unit A, Buckingham Business Park,
Anderson Road
Swavesey
Cambridge, CB24 4UQ
United Kingdom
For the address and telephone number of regional offices, refer to
our website: www.taitradio.com
About this document
Before using the radio, please read the important safety and com-
pliance information below.
For information about the way your radio operates, see the user’s
guide or contact your radio provider.
Copyright and Trademarks
All information contained in this document is the property of Tait
International Limited. Allrights reserved. Thisdocument may not, in
whole or in part, be copied, photocopied, reproduced, translated,
stored, or reduced to any electronic medium or machine-readable
form, without prior written permission from Tait International Lim-
ited.
The word TAIT, TAITNET and the TAIT logo are trademarks of
Tait International Limited.
All trade names referenced are the service mark, trademark or
registered trademark of the respective manufacturers.
By using a Tait product you are agreeing to be bound by the terms of
the Tait Software Licence Agreement.Please read the Tait Software
Licence Agreement carefully before using this Tait product. If you do
not agree to the terms of the Tait Software Licence Agreement, do
not use the Tait Product. The full agreement is available at www.-
taitradio.com/our-resources/legal#Tait_Software_Licence_Agree-
ment
If you have any enquiries regarding this document, or any comments,
suggestions and notifications of errors, please contact your regional
Tait office.
Intellectual Property Rights
This product may be protected by one or more patents or designs of
Tait International Limited together with their international equi-
valents, pending patent or design applications, and registered trade
marks, for a complete list please check www.taitradio.com/patent
The AMBE+2™ voice coding Technology embodied in this product
is protected by intellectual property rights including patent rights,
copyrights and trade secrets of Digital Voice Systems, Inc. This voice
coding Technology is licensed solely for use within this Com-
munications Equipment. The user of this Technology is explicitly
prohibited from attempting to decompile, reverse engineer, or dis-
assemble the Object Code, or in any other way convert the Object
Code into a human-readable form.
Environmental Responsibilities
Tait International Limited is an environmentally responsible com-
pany which supports waste minimization, material recovery and
restrictions in the use of hazardous materials. TheEuropean Union’s
Waste Electrical and Electronic Equipment (WEEE) Directive and
The Waste Electrical and Electronic Equipment Regulations 2013
No. 3113 require that this product be disposed of separately from the
general waste stream when its service life is over. For more inform-
ation about how to dispose of your unwanted Tait product, visit the
Tait WEEE website at www.taitradio.com/our-resources/-
compliance#WEEE. Please be environmentally responsible and dis-
pose through the original supplier, or contact Tait International
Limited.
Tait will comply with environmental requirements in other markets
as they are introduced.
Contact Information
Safety and compliance information
Thisradioisdesignedtocomplywithapplicableregulations.Unauthorizedaccessandrepairof
thisproductwillvoidthewarranty.Anymodificationsorchangesmadetotheradiothatarenot
expresslyapprovedbyTaitInternationalLtdcouldinvalidatecompliancerequirementsandvoid
theuser’sauthoritytooperatetheradio.
Servicingmustbeperformedbyanauthorizedserviceprovider.ContactyourTaitrepresentativeforalistof
authorizedserviceproviders.
Listening at a safe level
Listeningathighvolumescancausehearingdamage.Alwaysreducethevolumetoacomfortable
listeninglevel.
Interference with electronic devices
Warning Some electronic devices may be prone to malfunction due to a lack of pro-
tection from the RF energy that is present when your radio is transmitting.
ExamplesofelectronicdevicesthatmaybeaffectedbyRFenergyare:
n aircraftelectronicsystems
n vehicularelectronicsystemssuchasfuelinjection,anti-skidbrakes,andcruisecontrol
n medicaldevicessuchaspacemakersandhearingaids
n medicalequipmentinhospitalsorhealthcarefacilities.
Switchofftheradiobeforeboardinganaircraft.Usingyourradiowhileintheairisnotpermitted.
Consultthemanufacturer(oritsrepresentative)ofanysuchelectronicdevicestodeterminewhetherelec-
troniccircuitsinthosedeviceswillperformnormallywhentheradioistransmitting.
Warning If you have a pacemaker:
n immediatelyturnofftheradioifyoususpectitisinterferingwiththepacemaker
n keeptheradioatleast6inches(15cm)fromthepacemakerwhiletheradioison
n usetheradioonthesideoppositetothepacemakertominimizeinterference
n nevercarrytheradioinabreastpocket
Ifthereisinterferencebetweenyourhearingaidandtheradio,pleasediscussanalternativesolution
withthehearingaidmanufacturer.
Radio frequency exposure information
Thisradioemitsradiofrequency(RF)energy(radiowaves)primarilywhencallsaremade.RFisa
formofelectromagneticenergy(likesunlight),andmaximumlevelsofexposuretoRFareregulated
toensureyoursafetyandthesafetyofthosearoundyou.
TocomplywithRFexposureregulations,pleasereadthefollowinginformationbeforeusingthisradio.
4
Tait International Ltd - November 2021
positions and locations (worn on the body)as required by the
performed in
FCC
62479:2010,EN50566:2017,EN50663:2017.
Controlling exposure to RF energy
Warning Only use Tait approved accessories. Unapproved accessories could increase
the SAR values.
Compliance with RF energy exposure standards
ThisdeviceisincompliancewithSARaccordingtoANSI/IEEEC95.1-1992,CanadaRSS102,2013/35/EU
andothers.
Thisdevicewastestedinaccordancewiththemeasurementmethodsandproceduresspecifiedin
IEEE1528,CanadaRSS102,ICNIRPandEN62479,EN50566,EN50663.
Thisdeviceisdesignedtonotexceedthelimitsforexposuretoradiowaves(radiofrequencyelec-
tromagneticfields)andcomplieswith:
a. EN
TheEN62479:2010SARlimitforgeneralpopulationdevicesis2.0W/kgaveragedover10gramsof
tissue.
b. IndustryCanadalicense-exemptRSSstandard(s),RSS-102.
c. FederalCommunicationCommissionoftheUnitedStates
Warning Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. The antenna
(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter not approved by Tait.
IC radiation exposure statement
5
Tait International Ltd - November 2021
The device has been tested and complies with SAR limits, users can obtain Canadian information on
RF exposure and compliance
10
SAR tests are conducted using standard operating positions accepted by the
transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at
the highest certified power level, the actual SAR level of the device while operating can be well below the
maximum value.
Before a new model device is a available for sale to the public, it must be tested and certified to the FCC
that it does not exceed the exposure limit established by the FCC, Tests for each device are
.
For face-up, mm was used for test, this equipment should be installed and operated with minimum distance
mm.
Non-compliance with the above restrictions may result in violation of RF exposure guidelines.
10
Indice
Lingue:
