Improper use of this machine can injure
people and damage the equipment.
People using or servicing this machine
must read and follow the instructions in
this manual.
IT IS IMPORTANT TO UNDERSTAND THAT
THIS MANUAL AND MACHINE LABELING
DO NOT COVER EVERY POSSIBLE
DANGER. IT IS IMPOSSIBLE FOR TAYLOR
TOOLS TO KNOW OF ALL POSSIBLE
DANGERS IN OPERATING AND SERVICING
THE BRONCO STRIPPER.
THE PURCHASER MUST GIVE THESE
INSTRUCTIONS TO ALL PEOPLE INVOLVED
WITH OPERATING, ASSISTING IN THE
WORK AREA, AND MAINTAINING THIS
MACHINE.
Training:
Read and understand this manual before
operating the machine.
Learn how to use the controls for steering,
moving and stopping in an open area
unobstructed by people and objects.
Before operating the machine and removing
flooring, learn and understand all
machine labeling for DANGER, WARNING,
CAUTION, and OPERATING INSTRUCTIONS.
NEVER PERMIT CHILDREN TO OPERATE
OR BE IN THE IMMEDIATE AREA WHEN
THE MACHINE IS IN OPERATION. DO NOT
ALLOW ADULTS TO OPERATE THE MACHINE
WITHOUT PROPER INSTRUCTION.
Safe operation of this equipment requires
your complete and unimpaired attention
at all times. Do not operate unit after or
during the consumption of drugs or alcohol.
Keep all people and animals away from
the operating area.
Transportation:
When hauling the machine, always use a
ramp that is rated for the weight of the
machine. Never secure the machine by
the control levers, or similar items that
could be damaged. Secure the machine
by the main body with tie-downs that are
rated for the weight of the machine.
Inspect the job site before floor removal.
Identify low spots, uneven sur faces,
expansion joint locations, obstacles in the
floor and hazardous conditions.
B for starting th machin , ch ck oil
l v l and fill if n c ssary. Ch ck air
filt rs and cl an/r plac as n d d.
El ctric Machin s:
When operating the machine at the job
site, have a qualified electrician inspect
the power source for proper rating of the
overload breaker. If a power source has to
be brought from a sub-panel, always have
a qualified electrician perform the work. A
Ground Fault Interrupter (GFI) should be
used when a chance of moisture on the
job site is possible. The proper location
for the GFI is at the source of the power
(i.e. plug the GFI into the power source
and then plug the machine's extension
cord into the GFI).
Before connecting the machine to the GFI
protected electrical supply, inspect the
cord and the cord connections for
damage, and replace and or repair any
damaged electrical components before
connecting the machine to the power supply.
Propan Machin s
Even though there is a catalytic exhaust
scrubber on the machine, the engine will
produce carbon monoxide. To ensure that
no one is overexposed to the exhaust
gases, you must provide adequate ventila-
tion. A carbon monoxide monitor is supplied
with the machine and should always be
used during operation to ensure proper
ventilation.
Saf ty Pr cautions
3
