- 5 -
The device generates precise sine signals (per manent positive) and
square signals (zero – symmetric or permanent positive) and sends them
under software control to an output port.
A special feature is the integrated SMA RT-WAVE. If selected, it w ill
modulate the assigned w ave form w ith a high frequency.
Special accessories, like the UV-Light Adapter or the Flat Magnetic Coil
Adapter, can be connected to the Pow erPort w ithout a separate amplifier.
The intensity of the square signals delivered can, depending on the
application, either be adjusted manually or automatically.
A TIMER can be assigned individually to each frequency or as a global
function.
The settings for the special application modes WOBBLE, ENV ELOP, and
for the signal amplitudes, are also accessible.
The DIRP-function (Dual Integration Resonance Procedure) can be used
to scan automatically for resonance answ ers to frequencies send to a
user. The procedure can be used in the complete frequency band of the
device. Graphical edit functions support the analysis of the DIRP – results.
An EA P (electro acupuncture) capability is integrated for diagnostic use by
experts. The optional EA P-SET is needed to use this feature.
A broad band application of frequencies (SWEEP) can be selected from
an individual touch screen w indow.
The device provides a significantly larger storage capability than older F-
SCA N models. 100 applications of up to 50 frequencies, complete w ith
names and all individual settings, or the complete results of DIRP runs
and EA P analysis, can be stored. In addition, up to 460 user defined
frequency sets (up to 30 values each) can be saved in the F-SCAN3
memory.
A pow erful state of the art 32-bit micro-processor controls all functions.
Custo mized ChipCard-functions support the data transfer betw een our
products F-SCAN3, F-SCAN MOBILE, F-SCAN COMPA CT and the
MinDevice.
We are convinced that the touch panel operation w ill be mastered by all
users without problems.
