TDK SmartBug MD-42688-P Manuale utente
SW-000103
InvenSense reserves the right to change the detail
specifications as may be required to permit
improvements in the design of its products.
InvenSense, Inc.
1745 Technology Drive, San Jose, CA 95110 U.S.A
+1(408) 988–7339
www.invensense.com
Document Number: SW-000103
Revision: 1.1
Release Date: 07/15/2020
SmartBug User Guide
SW-000103
Document Number: SW-000103 Page 2 of 51
Revision: 1.1
TABLE OF CONTENTS
1SmartBug Module.................................................................................................................................................. 3
2Installing and Running SMARTBUG APP ................................................................................................................ 4
3Connecting to the SmartBug Module .................................................................................................................... 7
BLE Connection ............................................................................................................................................ 7
USB Connection ......................................................................................................................................... 10
WiFi Connection......................................................................................................................................... 12
4Sensor Data Mode ............................................................................................................................................... 19
5Smart Door Lock .................................................................................................................................................. 25
6Asset Monitoring ................................................................................................................................................. 27
7HVAC Monitoring................................................................................................................................................. 31
8Sensor Fusion....................................................................................................................................................... 33
9Air Mouse ............................................................................................................................................................ 34
10 SD Card Logging Through the App ....................................................................................................................... 35
11 Standalone SD Card Logger.................................................................................................................................. 36
12 Access SD Card Log .............................................................................................................................................. 42
13 Conversion of the SD Card Logs........................................................................................................................... 44
14 Device Power and Reset ...................................................................................................................................... 45
15 OTA Firmware Upgrade ....................................................................................................................................... 46
16 Use Debug menu to see messages log ................................................................................................................ 49
17 Revision History ................................................................................................................................................... 50
SW-000103
Document Number: SW-000103 Page 3 of 51
Revision: 1.1
1SMARTBUG MODULE
Figure 1. SmartBug Module
SW-000103
Document Number: SW-000103 Page 4 of 51
Revision: 1.1
2INSTALLING AND RUNNING SMARTBUG APP
1. Go to the Microsoft App Store and search for SmartBug.
SW-000103
Document Number: SW-000103 Page 5 of 51
Revision: 1.1
2. Click on Install.
SW-000103
Document Number: SW-000103 Page 6 of 51
Revision: 1.1
3. Go to the Type here to search Window and type Smart. Then select the SmartBug to run the SmartBug
app. It can also be pinned to the taskbar for quick access.
SW-000103
Document Number: SW-000103 Page 7 of 51
Revision: 1.1
3CONNECTING TO THE SMARTBUG MODULE
There are three types of connections available on the SmartBug Module to connect to the SmartBug App:
•BLE (Bluetooth Low Energy)
•USB
•WiFi
For a WiFi connection, an Add-On board will be required.
Step 1: Connect to USB cable to turn on and charge the module. When the USB cable is connected, the green
LED will start blinking. Battery charging will occur while the USB cable is connected. The USB connection can
also be used to access SmartBug features through the App while in USB Mode
Step 2: Disconnect the cable. If the LED is blinking red, more charging is needed. If the LED is blinking blue, it
is charged enough, and it is now advertising for a BLE connection with the SmartBug App.
Step 3: IF BLE is not connected to the SmartBug App and the module experiences no motion within 30
seconds, the module will go into sleep mode, and the LED will turn off. Some gentle physical motion will be
required to turn on the module and start BLE advertisement again.
In order to enable WiFi, a BLE connection needs to be established first, and an Add-On board needs to be
connected to the SmartBug module.
The detailed procedure to connect BLE, USB, or WiFi for Master and slave is given below:
Note: Slave mode should only be used for the HVAC application.
BLE CONNECTION
1. Go to the Settings page.
2. Click Select master to choose the connection type.
SW-000103
Document Number: SW-000103 Page 8 of 51
Revision: 1.1
3. Select one of three options: BLE, USB, or WiFi.
Bluetooth Discovery Routine
1. Click on Search to discover the SmartBug module.
SW-000103
Document Number: SW-000103 Page 9 of 51
Revision: 1.1
2. Bluetooth Device Detection:
3. Bluetooth Device Selection
a. Select the device and click OK.
When the BLE device is selected, press the Connect button to connect the SmartBug module to the SmartBug App.
After clicking connect, wait a few seconds until the Master device parameters appear. If the Auto connect
checkbox is checked, the selected device will connect automatically on the application restart.
SW-000103
Document Number: SW-000103 Page 10 of 51
Revision: 1.1
Connecting BLE for the first time
When connecting BLE for the first time, the app will ask to pair with it. Click Yes.
The pairing is a secure BLE connection required by the Air mouse HID driver. This ensures smooth functionality of
the Air Mouse Application and smooth overall BLE connectivity.
USB CONNECTION
1. USB Device Detection
a. Click on Search to discover the SmartBug module.
Indice
Manuali Modulo wireless popolari di altre marche
Cooper Wiring Devices
Cooper Wiring Devices ESPIRE RF RFAPM Manuale utente
Yuga
Yuga CLM920 Manuale utente
Waldmann
Waldmann TALK Bluetooth Manuale utente
Telit Wireless Solutions
Telit Wireless Solutions UC864-G Manuale di installazione
Ebyte
Ebyte E07-900M10S Manuale utente
Quectel
Quectel SC690A Series Supplemento
Panasonic
Panasonic INDUSTRY PAN9028 Guida rapida alla configurazione
Ebyte
Ebyte E70-433NW30S Manuale utente
LongSung Technology
LongSung Technology U9507E Manuale utente
Wistron NeWeb
Wistron NeWeb DNUR-S2 Manuale utente
Ebyte
Ebyte E49-400M20S4 Manuale utente
RF-Star
RF-Star SimpleLink RF-BM-2652P1 CC2652P Manuale utente