TDS Metrocom ACTIONTEC Scheda informativa del prodotto
helpful resources, features and utilities:
http://www.tdsmetro.net
TDS Metrocom Internet Services Homepage
http://www.tdsmetro.com
TDS Metrocom Homepage
http://www.tdsmetro.net/faq
TDS Metrocom Frequently Asked Questions
http://speedtest.tdsmetro.net/speedtest
TDS Metrocom DSL Speed Test
http://www.tdsmetro.net/spyware
TDS Metrocom Spyware Information
http://www.tdsmetro.net/virus
TDS Metrocom Virus Information
R0007-0405
1
CONTENTS
ACTIONTEC DSL GATEWAY SETUP INSTRUCTIONS:
DSL Kit Contents 2
DSL Filter Installation 4
Actiontec DSL Gateway Installation 6
CONFIGURING YOUR COMPUTER
Windows XP 8
Window 98, Me, NT & 2000 10
Mac OS X 11
Mac OS 8/9 12
CONFIGURING YOUR COMPUTER FOR STATIC IP*
Configuring Your Gateway for Static IP 13
Windows XP 15
Window 98, Me, NT & 2000 17
Mac OS X 19
Mac OS 8/9 20
CONFIGURING YOUR COMPUTER FOR E-MAIL
Configuring Your E-mail 21
Configuring Outlook Express 5.0/6.0 22
Accessing Your WebMail 23
TROUBLESHOOTING: 24
SYSTEM REQUIREMENTS: 27
SUPPORT SERVICES: 28
*Complete only if you purchased a Static IP package.
2
DSL KIT CONTENTS
1. Actiontec DSL Gateway
2. Power cord
3. Ethernet (yellow) cable
3
DSL KIT CONTENTS
6. Splitter
4. DSL (gray) cable
5. DSL filters
1. 1 Actiontec DSL Gateway
2. 1 Power cord (Color:Black)
3. 1 Ethernet cable (Color:Yellow)
4. 1 DSL cable (Color:Gray)
5. 4 DSL filters (Color:White)
6. 1 Splitter (Color:White)
If you did not receive these items,
please call TDS Metrocom Repair
at 1.877.METROCOM (877.638.7626).
Verify your computer meets the system
requirements listed on page 27 of this
User Guide.
your DSL kit should include:
4
DSL FILTER INSTALLATION
TDS Metrocom provides DSL filters to ensure
that your DSL service does not interfere with
your telephone service. All analog telephony
devices* should be connected to your phone
jacks through a provided DSL filter (figure 7).
Unused phone jacks do not require a DSL filter.
Note: If you need additional filters or you
have a wall-mounted telephone, please call
TDS Metrocom Repair at 1.877.METROCOM.
1. Connect a DSL filter to your phone jack.
(figure 8)
2. Connect the analog device to the DSL filter.
Note: Phone cords that are 10 feet or less
are recommended. Using longer phone
cords between the phone jack and the
Actiontec DSL Gateway may cause slower
speeds or an interruption in service.
*Analog telephony devices include telephones,
answering machines, fax machines, dial-up modems,
some satellite dish receivers, security systems, and
many other devices.
figure 8
please note:
IMPORTANT: Do not install a DSL filter between
the Actiontec DSL Gateway and the phone jack. TDS
network
interface
answering
machine
fax machine
telephone
computer
DSL modem
FILTER
FILTER
FILTER
figure 7
5
DSL FILTER INSTALLATION
If you want to have a phone (or other analog
telephony device) and the Actiontec DSL
Gateway connected to the same phone jack,
you will need to use the provided splitter.
1. Connect the splitter to your phone jack.
(figure 9)
2. Connect a DSL filter to one side of
the splitter.
3. Connect your phone (or other analog
telephony device) to the DSL filter.
4. Connect the DSL (gray) cable to the
remaining side of the splitter.
5. Connect the remaining end of the DSL
(gray) cable to the Phone port on the
back of the Actiontec DSL Gateway.
Note: If your DSL light is not solid green
after 5 minutes, the splitter may be
defective. Remove it and verify the
DSL light is solid green.
figure 9
to the
Actiontec DSL
Gateway
6
ACTIONTEC DSL GATEWAY INSTALLATION
The Actiontec DSL Gateway needs proper
ventilation to function. Place your Actiontec DSL
Gateway in an adequately ventilated area and
away from heat sources.
Steps for wiring a single computer:
1. Plug the end of the power cord into the power
port on the back of the Actiontec DSL Gateway.
(figure 10)
2. Plug the other end of the power cord into
a power outlet. (A power strip with surge
protection is recommended.)
3. Turn the power switch on.
4. Plug one end of the Ethernet (yellow) cable into
the Ethernet Network Interface Card (NIC) in
your computer. (figure 11)
Note: Your computer may look
slightly different.
5. Plug the remaining end of the Ethernet cable
into one of the yellow Ethernet ports on the
back of the Actiontec DSL Gateway. (figure 12)
6. Connect one end of the DSL (gray) cable
to the phone port on the back of the Actiontec
DSL Gateway. (figure 13 next page)
7. Connect the remaining end of the DSL (gray)
cable into your phone jack.
(figure 14 next page)
figure 10
figure 11
figure 12
7
ACTIONTEC DSL GATEWAY INSTALLATION
figure 14
figure 13
Wiring for use with up to four computers
(Optional–not supported by TDS Internet
Services Technical Support):
1. Verify each computer meets the system
requirements listed on page 27 of this
User Guide.
2. Purchase an Ethernet cable for each PC.
3. Plug one end of the Ethernet cable into the
Ethernet Network Interface Card (NIC).
4. Plug the remaining end of the Ethernet cable
into one of the yellow Ethernet ports on the
back of the Actiontec DSL Gateway.
5. Repeat these steps for any additional PCs.
Note: Each additional computer must also be
configured. See chapter entitled “Configuring
Your Computer”.
If you have:
Windows XP page 8.
Windows 98, Me, NT or 2000 page 10.
Mac OS X page 11.
Mac OS 8/9 page 12.
8
CONFIGURING YOUR COMPUTER FOR WINDOWS XP
1. Select
Start
then
Control Panel.
(figure 15)
2. Click
Network and Internet Connections
.
(figure 16)
Note: If you do not see
Network & Internet
Connections
, skip to the next step.
3. Click
Internet Options
. (figure 17)
figure 15
figure 16
figure 17
9
CONFIGURING YOUR COMPUTER FOR WINDOWS XP
4. Select the
Connections
tab. (figure 18)
5. Select
Never dial a connection
.
Note: If the
Never dial a connection
option is disabled (grayed out), skip to
the next step.
6. Click
LAN Settings
.
7. Verify all boxes are
unchecked
and
click
OK
. (figure 19)
8. Click
OK
. (figure 18)
Note: If you purchased a Static IP package,
proceed to page13 and complete the Static
IP setup for Windows XP. If you did not pur-
chase a Static IP package
you may proceed to page 21.
figure 18
figure 19
Altri manuali per ACTIONTEC
1
Indice
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
