Teamco SNOWBLAST 9600A Manuale utente

9600A

Published 04/08

OPERATOR’S MANUAL

SNOW BLOWER

This Operator's Manual is an integral part of the safe operation of this machine and must

be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety

and Operation Instructions contained in this manual before operating the equipment. C01-

Cover

$0.00

SNOWBLAST

Teamco Inc.

27050 S. Katie Rd.

Suite 400

Tea, SD 57064

605-498-0610

[email protected]

To the Owner/Operator/Dealer

All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded

operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has

designed this implement to be used with all its safety equipment properly attached to minimize the chance of

accidents.

BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the

rules of safety and common sense!

WARRANTY INFORMATION:

Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration

Form in full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on the

Warranty Card and on the Warranty Form that you retain

TABLE OF CONTENTS

SAFETY SECTION .............................................................................................................. 1-1

General Safety Instructions and Practices ......................................................................................................... 1-2

Operator Safety Instructions and Practices .......................................................................................................1-3

Connecting or Disconnecting Implement Safety Instructions and Practices ......................................................1-5

Equipment Operation Safety Instructions and Practices ....................................................................................1-6

Transporting Safety Instructions and Practices .................................................................................................1-9

Maintenance and Service Safety Instructions and Practices ........................................................................... 1-11

Concluding Safety Instructions and Practices ..................................................................................................1-13

Decal Location .................................................................................................................................................1-14

Decal Description ............................................................................................................................................. 1-16

Federal Laws and Regulations ........................................................................................................................1-22

INTRODUCTION SECTION ................................................................................................. 2-1

ASSEMBLY SECTION ........................................................................................................ 3-1

HYDRAULIC CHUTE ROTATION CYLINDER ..................................................................................................3-2

OPERATION SECTION ....................................................................................................... 4-1

OPERATOR REQUIREMENTS .........................................................................................................................4-3

TRACTOR REQUIREMENTS ............................................................................................................................ 4-4

ROPS and Seat Belt ..........................................................................................................................................4-4

Tractor Safety Devices .......................................................................................................................................4-4

Tractor Horsepower ...........................................................................................................................................4-4

3-Point Hitch ......................................................................................................................................................4-5

Power Take Off (PTO) ....................................................................................................................................... 4-5

Tire Spacing .......................................................................................................................................................4-6

GETTING ON AND OFF THE TRACTOR .........................................................................................................4-6

Boarding the Tractor .......................................................................................................................................... 4-6

Dismounting the Tractor ..................................................................................................................................... 4-7

STARTING THE TRACTOR .............................................................................................................................. 4-7

CONNECTING THE SNOW BLOWER TO THE TRACTOR .............................................................................4-8

Connecting the Snow Blower to the Tractor ......................................................................................................4-8

DRIVELINE ATTACHMENT ..............................................................................................................................4-9

Connecting Snow Blower Hydraulic Lines to the Tractor .................................................................................4-10

PRE-OPERATION INSPECTION AND SERVICE ...........................................................................................4-10

Tractor Pre-Operation Inspection/Service ........................................................................................................ 4-11

Snow Blower Pre-Operation Inspection/Service .............................................................................................. 4-12

DRIVING THE TRACTOR AND SNOW BLOWER .......................................................................................... 4-16

Starting the Tractor .......................................................................................................................................... 4-18

Brake and Differential Lock Setting .................................................................................................................. 4-18

Driving the Tractor and Snow Blower ..............................................................................................................4-19

Crossing Ditches and Steep Inclines ...............................................................................................................4-20

OPERATING THE TRACTOR AND SNOW BLOWER ....................................................................................4-21

Foreign Debris Hazards ...................................................................................................................................4-21

Engaging the Power Take Off (PTO) ...............................................................................................................4-22

PTO RPM and Ground Speed .........................................................................................................................4-22

OPERATING THE SNOW BLOWER ............................................................................................................... 4-23

Shutting Down the Implement .......................................................................................................................... 4-25

DISCONNECTING THE SNOW BLOWER FROM THE TRACTOR ................................................................ 4-25

SNOW BLOWER STORAGE ...........................................................................................................................4-27

TRANSPORTING THE TRACTOR AND SNOW BLOWER .............................................................................4-27

Transporting on Public Roadways ................................................................................................................... 4-29

Hauling the Tractor and Implement ..................................................................................................................4-32

TROUBLESHOOTING GUIDE ........................................................................................................................4-33

MAINTENANCE SECTION .................................................................................................. 5-1

NUTS AND BOLTS ............................................................................................................................................5-2

DRIVE CHAIN .................................................................................................................................................... 5-2

SHEAR BOLTS ..................................................................................................................................................5-2

LUBRICATION ...................................................................................................................................................5-3

PTO Shaft ..........................................................................................................................................................5-3

Spout Bracket ....................................................................................................................................................5-3

Fans ...................................................................................................................................................................5-4

Oil Reservoir ...................................................................................................................................................... 5-4

GREASE SCHEDULE ....................................................................................................................................... 5-5

STORAGE .........................................................................................................................................................5-5

PROPER TORQUE FOR FASTENERS ............................................................................................................5-6

DEALER’S PREDELIVERY SERVICE GUIDE

for the 9600A

DETAILS OF ITEMS LISTED BELOW ARE COVERED IN THIS OPERATOR’S MANUAL

______ Set up machine as outlined in the shipping instructions attached to these instructions.

______ Check that all safety decals are in good condition, replace if necessary.

______ Check that gearboxes have been filled with oil.

______ Check that all grease fittings have been lubricated.

DEALER’S DELIVERY GUIDE

______ Mounting and removal from tractor

______ Operation

______ Adjustments

______ Lubrication

______ Maintenance

______ Operator’s safety precautions

______ User’s responsibility and warranty

______ Operator’s manual delivered to owner

______ Operator’s instructed on contents of owner’s manual

Safety Section 1-1

SAFETY SECTION

SAFETY

9600A 04/08Safety Section 1-2

SAFETY

General Safety Instructions and Practices

A careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to

the owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and

observing certain precautions. The first section of this manual includes a list of Safety Messages that, if

followed, will help protect the operator and bystanders from injury or death. Read and understand these Safety

Messages before assembling, operating or servicing this Implement. This equipment should only be operated

by those persons who have read the Manual, who are responsible and trained, and who know how to do so

responsibly.

The Safety Alert Symbol combined with a Signal Word, as seen below, is used throughout this

manual and on decals which are attached to the equipment. The Safety Alert Symbol means:

“ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” The Symbol and Signal Word

are intended to warn the owner/operator of impending hazards and the degree of possible injury

faced when operating this equipment.

Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH OR

VERY SERIOUS INJURY.

Indicates an imminently hazardous situation that, if not avoided, COULD result in DEATH

OR SERIOUS INJURY.

Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR

INJURY.

Identifies special instructions or procedures that, if not strictly observed, could result in

damage to, or destruction of the machine, attachments or the environment.

NOTE: Identifies points of particular interest for more efficient and convenient operation or repair.(SG-1)

Practice all usual and customary safe working precautions and above all---remember safety is

up to YOU. Only YOU can prevent serious injury or death from unsafe practices.

READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or

death may occur unless care is taken to follow the warnings and instructions stated in the

Safety Messages. Always use good common sense to avoid hazards. (SG-2)

Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las

medidas de seguridad. (SG-3)

2008 Teamco Inc.

SAFETY

9600A 04/08Safety Section 1-3

SAFETY

Operator Safety Instructions and Practices

Engine Exhaust, some of its constituents, and certain vehicle components contain or emit

chemicals known to the state of California to cause cancer and birth defects or other

reproductive harm. (SG-30)

Battery posts, terminals and related accessories contain lead and lead compounds,

chemicals known to the state of California to cause cancer, birth defects or other

reproductive harm. (SG-31)

The rotating parts of this machine continue to rotate even after the PTO has been turned off.

The operator should remain in his seat for 60 seconds after the brake has been set, the

PTO disengaged, the tractor turned off, and all evidence of rotation has ceased. (S3PT-10)

“Wait a minute...Save a life!”

Never crawl under a raised Implement supported solely by the Tractor 3-Point hitch.

Release of the control lever or mechanical failure will result in the Implement falling and

possible injury or death. Always securely block up the Implement before crawling

underneath to perform repairs and service. (S3PT-19)

Never operate the Tractor or Implementuntil you have readand

completely understand this Manual, the Tractor Operator’s Manual, and

each of the Safety Messages found in the Manual or on the Tractor and

Implement. Learn how to stop the tractor engine suddenly in an

emergency. Never allow inexperienced or untrained personnel to

operate the Tractor and Implement without supervision. Make sure the

operator has fully read and understood the manuals prior to operation.

(SG-4)

The operator and all support personnel should wear hard hats, safety

shoes, safety glasses, and proper hearing protection at all times for

protection from injury including injury from items that may be thrown by

the equipment. (SG-16)

PROLONGED EXPOSURE TO LOUD NOISE MAY CAUSE

PERMANENT HEARING LOSS! Tractors with or without an Implement

attached can often be noisy enough to cause permanent hearing loss.

We recommend that you always wear hearing protection if the noise in

the Operator’s position exceeds 80db. Noise over 85db over an

extended period of time will cause severe hearing loss. Noise over 90db

adjacent to the Operator over an extended period of time will cause

permanent or total hearing loss. NOTE: Hearing loss from loud noise

[from tractors, chain saws, radios, and other such sources close to the

ear] is cumulative over a lifetime without hope of natural recovery. (SG-I7)

2008 Teamco Inc.

SAFETY

9600A 04/08Safety Section 1-4

SAFETY

Do not approach the front of the snow blower while the fan is rotating. Contact with the

rotating fan can result in serious injury or even death. Stay away until all motion has

stopped and the snow blower is securely blocked up before removing material, performing

service, and making repairs. (SSB-05a)

Always readcarefully andcomply fully with the manufacturer’s

instructions when handling oil, solvents, cleansers, and any other

chemical agent. (SG-22)

KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement

and possible serious injury or death. (SG-24)

Never allow children to play on or around Tractor or Implement. Children can slip or fall off

the Equipment and be injured or killed. Children can cause the Implement to shift or fall

crushing themselves or others. (SG-25)

NEVER use drugs or alcohol immediately before or while operating the

Tractor and Implement. Drugs and alcohol will affect an operator’s

alertness and coordination and therefore affect the operator’s ability to

operate the equipment safely. Before operating the Tractor or

Implement, an operator on prescription or over-the-counter medication

must consult a medical professional regarding any side effects of the

medication that would hinder their ability to operate the Equipment safely.

NEVER knowingly allow anyone to operate this equipment when their

alertness or coordination is impaired. Serious injury or death to the

operator or others could result if the operator is under the influence of

drugs or alcohol. (SG-27)

Prolongedoperation may cause operator boredom and fatigue affecting safe operation.

Take scheduled work breaks to help prevent these potentially impaired operating

conditions. Never operate the Implement and Tractor in a fatigued or bored mental state

which impairs proper and safe operation. (SG-32)

DO NOT operate this Implement on a Tractor that is not properly maintained. Should a

mechanical or Tractor control failure occur while operating, immediately shut down the

Tractor and perform repairs before resuming operation. Serious injury and possible death

could occur from not maintaining this Implement and Tractor in good operating condition.

(SG-36)

2008 Teamco Inc.

Indice

Manuali Spazzaneve popolari di altre marche

Murray

Murray 624504X4A Manuale utente

Blizzard

Blizzard POWER PLOW 8100PP Manuale utente

Craftsman

Craftsman 486.24837 Manuale utente

Yard-Man

Yard-Man E2B5 Manuale utente

ST ST 526 A Manuale utente

MTD

MTD 3AA Manuale utente

Toro

Toro Power TRX 1428 OHXE Manuale utente

Ryobi

Ryobi RYAC800 Manuale utente

Poulan Pro

Poulan Pro 416829 Manuale utente

Poulan Pro

Poulan Pro 437986 Manuale utente

MTD

MTD 319-180-00 Manuale utente

Brute

Brute 1695565 Manuale utente

Egholm

Egholm City Ranger 2250 Manuale utente

Poulan Pro

Poulan Pro 420915 Manuale utente

GreenWorks

GreenWorks SNF402 Manuale utente

LOFTNESS

LOFTNESS 601D1 Manuale utente

LOFTNESS

LOFTNESS 1082I Manuale utente

LOFTNESS

LOFTNESS 481EL Manuale utente