Teccpo TDGS01G Manuale utente
User Manual
TECCPO 3.6V USB
Built-in Battery Grass and Shrub shear
Model:TDGS01G
CONTENT
.
.
W y .
-EN-
-01-
-02-
-EN-
1 Grass cutter blade 2 Blade release mechanism
3 Safety lock-off 4 ON button
5 Shrub cutter blade 6 Blade guard
7 USB cable 8 Interlock butten (handle)
8
3
4
2
1
6
5
Fig.1
7
Product description
-03-
-EN-
Fig.2 Fig.3
A
2
c c
B
Fig.4 Fig.5
-EN-
-04-
Pictogram illustration and explanation
1 2 3 4 5 6
7 8 9
1 Warning!
2 After-running of the appliance!
3 Read the operation instructions
4 Do not use tool in wet weather conditions
5 Keep third persons out of the danger zone
6 Attention: Environmental Protection! This device may not be disposed of with
general/household waste. Dispose of only at a designated collection point.
7 Protection class III
8 Guaranted acoustic capacity level LWA 87 dB(A)
9 Rechargeable battery contains lithium! Recycle defective rechargeable batteries!
-EN-
TECCPO 3.6V USB Grass and Shrub shear
Technical Specifications
Battery voltage/operation voltage V DC 3,6
Battery type Ah 1,5
Operating time min. max. 35
No-load Speed n0 rpm 1000
Cutting width * mm 70
Cutting length ** mm 115
Cutting thickness ** mm 8
Weight kg 0,85
Measured Acoustic capacity level dB(A) 87 k=3,0 dB (A)
Noise pressure level as per (DIN EN
60745-2-15) dB (A) 73 k=3,0 dB (A)
Vibrations (DIN EN 60745-2-15) m/s2 <2,5
-The specified vibration emission value was measured by a standardized test methods and can
compare with other power tools are used.
-The specified vibration emission value can also be necessary for the assessment of work breaks
are used.
-The specified vibration emission value can vary during the actual use of the electric tool by spec-
ifying the value,
depending on the way how to use the power tool.
-Note: You create the privilege against vascular pulsations of the hands in time breaks.
-Try to keep the stress due to vibration as low as possible. For example, measures to
reduce vibration stress are wearing gloves when using the tool and limiting the work time.
All phase of the operating cycle must be considered in this regard, (for example, times
when the power tool is switched off, and times when the power tool is switched on but is not run-
ning under load).
-Always keep hands and feet away from the cutting tools, particularly when switching onthe motor!
-05-
-EN-
-06-
Attention: Noise protection! Please observe the local
regulations when operating your device
Intended use
As required, this device may be converted via simple replacement of the included attachments
into grass shears or bush shears.
Hints for your work with the tool
The shrub trimmer cuts ornamental shrubs and light undergrowth or bushes. The device is also
well suited for ornamental cuts as, for example, for the care of graves.
The battery-powered grass and shrub shear can not and should not replace your hedge
shears.
They are exclusively designed to trim and cut back ornamental shrubs and brush wood with a low
wood thickness. Any other use is not deemed appropriate and the manufacturer/ supplier is not
liable for damages resulting from such use.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Important! It is prohibited to use the tool to chop material for composting because of the potential
danger to per- sons and property.
The grass shears allow for clean cuts of lawn edges or hardly accessible lawn areas.
Each type of use other than those given in these instructions for use can damage the machine
and cause serious risk to the user.
Please always observe the safety instructions in order to safeguard your guarantee claimand in
the interests of product safety. Due to the machine’s design, we are unable to fully exclude all re-
sidual risks.
Residual dangers
Residual risks always remain even if the hedge trimmer is used properly. The hedge trimmer‘s
design can entail the following hazards:
•Contact can be made with the unprotected blade (resulting in cutting injuries)
•Reaching into or grabbing the hedge trimmer while it is in operation (resulting in cutting injuries)
•Unanticipated, sudden movement of the plant material being cut (resulting in cutting injuries)
•Ejection or catapulting of damaged cutting teeth
•Ejection or catapulting of the plant material being cut
•Hearing damage if the specified hearing protection is not worn
•Inhalation of cut materials
-07-
-EN-
Important!
When using the equipment, a few safety precautions must be observed to avoid injuries and dam-
age. Please read the complete operating instructions and safety regulations with due care. Keep
this manual in a safe place, so that the information is available at all times.
If you give the equipment to any other person, hand over these operating instructions and safety
regulations as well. We cannot accept any liability for damage or accidents which arise due to a
failure to follow these instructions and the safety instructions.
General safety instructions
Attention! Read all instructions contained here- in. Failure to
observe the following instructions may result in electric shock,
burns and/or severe injury. The term ‘power tool’ used in the
following includes both mains-operated tools (with mains supply)
and battery-operated tools (without mains supply).
KEEP THESE INSTRUCTIONS CAREFULLY!
1）Working area
•Keep your working area clean and tidy. Untidy and poorly lit
working areas may lead to accidents.
•Do not operate the tool in potentially explosive environments
containing com- bustible fluids, gases or dusts.Power tools ge-
nerate sparks that may ignite dusts or fumes.
•Keep children and other persons away when you are operating
the power tool. Distractions may result in he operator loosing co-
ntrol over the tool
2）Electrical safety
•The mains plug of the power tool must fit into the mains socket.
The plug must not be modified in any way. Do not use adapter
plugs/ce earthing.
Unmodified plugs and fitting sockets reduce the risk of electric
shock.
•Avoid physical contact with earthed surfaces as pipes,
heaters, ovens and re- frigerators. There is an increased risk of
electric shock if your body earthed.
Indice
Altri manuali Teccpo Utensili elettrici
