figure1 figure2
Note：1、Do not move the camera immediately after shooting is successful. Wait for one second
to ensure the quality of the photo and give sufficient exposure time.
2、Be sure to take photos when the light is good, and the camera is placed in the shooting
environment, such as the room, the best effect is in the middle.
4. Power off
1）.Turn off the camera
Hold the "power " button on the remote control for 3 seconds, and the buzzer on the remote
control will "drop" and then release the "power" button. The remote control screen will be shown
as“TECHE...”， When the camera's physical switch is turned off, the remote control screen shows
that the camera has been turned off .
2）.close the remote control
When the camera is completely turned off, Press the unlock on remote control for a while，then
the screen of remote control will be out， and now remote control is turned off successfully
5. Data Transmission
Keep the camera battery connected and turn on the "battery box switch" to keep the camera in
power.(when connecting to a computer, it is necessary to turn on the camera's physical switch)
Connect the data cable interface to the camera interface, and the USB interface is connected to
the computer USB interface;
At this point, wait for the computer to automatically enumerating 8 disks, 8 storage usb flash disk;
