TechNexion TEP-0700-IMX7 Manuale utente

TEP-0700-IMX7 MODULAR HMI PRODUCT MANUAL

(TEP-0700-IMX7)

VER. 1.01

March 11, 2019

TEP-0700-IMX7 HARDWARE MANUAL –VER 1.00 –MAR 11 2019

Page 2of 26

REVISION HISTORY

Revision

Date

Originator

Notes

1.00

July 30, 2018

TechNexion

First public release

1.01

March 11, 2019

TechNexion

Ordering table update

TEP-0700-IMX7 HARDWARE MANUAL –VER 1.00 –MAR 11 2019 
Page 3of 26 
TABLE OF CONTENTS 
 
Introduction ...............................................................................................................................................4 
1. General Care and Maintenance .........................................................................................................4 
TEP-0700-IMX7 Product Overview...........................................................................................................5 
1. Functional Block Diagram ..................................................................................................................5 
2. Dimensions.........................................................................................................................................6 
3. Device Cut-out Dimensions For Mounting Though a Panel...............................................................7 
4. External Connectors...........................................................................................................................8 
5. Internal Board Connectors ...............................................................................................................11 
External Connectors................................................................................................................................13 
1. Serial Port Connector (RS-XXX)......................................................................................................13 
2. CAN Bus Connector (CANBus)........................................................................................................14 
3. Digital I/O Connectors (GPIO1/GPIO2)............................................................................................14 
4. S1 Button..........................................................................................................................................15 
5. RST Button.......................................................................................................................................15 
6. LED Light Indicator...........................................................................................................................15 
7. USB OTG (Type-C) Connector ........................................................................................................16 
8. MicroSD Card Slot............................................................................................................................16 
9. Nano-SIM Card Slot .........................................................................................................................16 
10. Gigabit Ethernet Interface ..............................................................................................................17 
11. USB Host Connector......................................................................................................................17 
12. Power Input Connector...................................................................................................................17 
13. Grounding.......................................................................................................................................18 
14. Antenna Holes................................................................................................................................18 
Internal Connectors and Expansion Options ..........................................................................................19 
1. RTC Battery Connector....................................................................................................................19 
2. M.2 KEY-B 3G/4G LTE Module Connector......................................................................................20 
3. SW3 Panel Backlight Switch ............................................................................................................20 
4. SW2 Panel Scanning Direction Switch.............................................................................................20 
Mounting..................................................................................................................................................21 
1. VESA Mounting................................................................................................................................21 
2. Surface Mounting and O-ring Installation.........................................................................................22 
Ordering Information ...............................................................................................................................23 
1. Custom Part Number Rule ...............................................................................................................23 
2. Standard Package Contents ............................................................................................................24 
Important Notice......................................................................................................................................25 
Disclaimer ...............................................................................................................................................26 

TEP-0700-IMX7 HARDWARE MANUAL –VER 1.00 –MAR 11 2019

Page 4of 26

1. Introduction

1.1. General Care and Maintenance

Your device is a product of superior design and craftsmanship and should be treated with care.

The following suggestions will help you.

•Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain

minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.

•Do not use or store the device in dusty or dirty areas. Its parts and electronic components can be

damaged.

•Do not store the device in hot areas. High temperatures can shorten the life of electronic devices,

damage batteries, and warp or melt certain plastics.

•Do not store the device in cold areas. When the device returns to its normal temperature,

moisture can form inside the device and damage electronic circuit boards.

•Do not open the device while power is on.

•Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and

fine mechanics.

•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

•Do not paint the device. Paint can clog the parts and prevent proper operation.

•Unauthorized modifications or attachments could damage the device and may violate regulations

governing radio devices.

These suggestions apply equally to your device, battery, charger, or any enhancement. If any device is

not working properly, take it to the nearest authorized service facility for service.

Regulatory information

Disposal of Waste Equipment by Users in Private Household in the European Union

This symbol on the product or on its packaging indicates that this product must not be

disposed of with your other household waste. Instead, it is your responsibility to dispose

of your waste equipment by handing it over to a designated collection point for the

recycling of waste electrical and electronic equipment. The separate collection and

recycling of your waste equipment at the time of disposal will help to conserve natural

resources and ensure that it is recycled in a manner that protects human health and the

environment. For more information about where you can drop off your waste equipment

for recycling, please contact your local city office, your household waste disposal service or the shop

where you purchased the product.

We hereby declare that the product is in compliance with the essential requirements and

other relevant provisions of European Directive 2014/53/EU (Directive on the

harmonisation of the laws of the Member States relating to the making available on the

market of radio equipment and repealing Directive 1999/5/EC).

TEP-0700-IMX7 HARDWARE MANUAL –VER 1.00 –MAR 11 2019

Page 5of 26

2. TEP-0700-IMX7 Product Overview

2.1. Functional Block Diagram

TEP-0700-IMX7 HARDWARE MANUAL –VER 1.00 –MAR 11 2019

Page 6of 26

2.2. Dimensions

The following figure shows the TEP-0700-IMX7 dimensions (unit: mm):

TEP-0700-IMX7 HARDWARE MANUAL –VER 1.00 –MAR 11 2019

Page 7of 26

2.3. Device Cut-out Dimensions For Mounting Though a Panel

The TEP-0700-IMX7 can be mounted on the front or the back of the panel. In order to mount it from the

front, a nominal rectangular cutout must be made in the panel. The following drawing shows the

dimensions of the cut-out area (unit: mm):

TEP-0700-IMX7 HARDWARE MANUAL –VER 1.00 –MAR 11 2019

Page 8of 26

2.4. External Connectors

The TEP-0700-IMX7 has a number of external connectors.

Rear view:

16 15 12 13

17 11

18 9

19 7

1 2 3 4 5 6

External Connectors:

No.

Description

No.

Description

RS-XXX (Serial Port) connector

USB OTG (Type-C) connector

CANBus (CAN Bus) connector

MicroSD card slot

GPIO1 connector

Nano-SIM card slot

GPIO2 connector

Antenna hole

LAN2 RJ45 connector

Antenna hole

USB Host connector

S1 Boot Select button

LAN1 RJ45 and PoE (optional)

Reset button

Power Input connector

LED Light indicator

Grounding screw

Antenna hole

TEP-0700-IMX7 HARDWARE MANUAL –VER 1.00 –MAR 11 2019

Page 9of 26

Bottom view:

5 6

1 2 3 4

Right side view:

10 14

7 8 9 11 13

External Connectors:

No.

Description

No.

Description

RS-XXX (Serial Port) connector

USB OTG (Type-C) connector

CANBus (CAN Bus) connector

MicroSD card slot

GPIO1 connector

Nano-SIM card slot

GPIO2 connector

Antenna hole

LAN2 RJ45 connector

Antenna hole

USB Host connector

S1 Boot Select button

LAN1 RJ45 and PoE (optional)

Reset button

Power Input connector

LED Light indicator

Grounding screw

Antenna hole

TEP-0700-IMX7 HARDWARE MANUAL –VER 1.00 –MAR 11 2019

Page 10 of 26

Left side view without side cover:

15 17 18

16 19

External Connectors:

No.

Description

No.

Description

RS-XXX (Serial Port) connector

USB OTG (Type-C) connector

CANBus (CAN Bus) connector

MicroSD card slot

GPIO1 connector

Nano-SIM card slot

GPIO2 connector

Antenna hole

LAN2 RJ45 connector

Antenna hole

USB Host connector

S1 Boot Select button

LAN1 RJ45 and PoE (optional)

Reset button

Power Input connector

LED Light indicator

Grounding screw

Antenna hole

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TechNexion Pannello touch

TechNexion

TechNexion TEP-0500-IMX6UL Manuale utente

TechNexion

TechNexion TWP-1010-IMX6 Manuale utente

TechNexion

TechNexion TEP-0500-IMX7 Manuale utente

TechNexion

TechNexion TEP-1560-BSW Manuale utente

TechNexion

TechNexion TWP-1010-BSW Manuale utente

TechNexion

TechNexion TOUCAN TC-0710 SLIM HMI Manuale utente

Manuali Pannello touch popolari di altre marche

FlowLine

FlowLine Data loop Manuale utente

ALPEX

ALPEX AEx-8 P Series Manuale utente

Ltech

Ltech E5S Manuale utente

Harman

Harman AMX MODERO S MSD-701-L2 Manuale utente

Acnodes

Acnodes PC 1150 Manuale utente

AIS

AIS IP10IA99 series Manuale utente

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuale utente

YASKAWA

YASKAWA TP 610C Manuale utente

B&R

B&R Power Panel C Series Manuale utente

Beijer Electronics

Beijer Electronics X2 control Manuale utente

AXIOMTEK

AXIOMTEK GOT321W-521 Manuale utente

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuale utente

Qomo

Qomo QIT1386 Manuale utente

DFI

DFI KS104-CD Manuale utente

AMX

AMX AXP-PPC Guida

Sartorius

Sartorius X3 PR 5410 Manuale utente

AMX

AMX Modero X Series Manuale utente

Advantech

Advantech TPC-30 Series Manuale utente