Technica Engineering 1000Base-T1 SPY mini Manuale utente

USER MANUAL

100BASE-T1

MEDIACONVERTR

BCM

Manual-Version: 2.0

Hardware-Version: all

November 2018

1000BASE-T1

MEDIACONVERTER

1000 BASE-T1 MediaConverter User Manual

CONTENT

1GENERAL INFORMATION........................................................................................... 3

1.1 Functionality and Features of the 1000BASE-T1 Media Converter .................. 3

1.2 Warranty and Safety Information ........................................................................ 4

1.3 Declaration of conformity .................................................................................... 5

2HARDWARE INTERFACES .......................................................................................... 6

2.1 Connectors............................................................................................................ 6

2.1.1 nano-MQS Connector .................................................................................... 6

2.1.2 RJ45 Ethernet connectors ............................................................................ 8

2.2 Other Interfaces .................................................................................................... 8

2.2.1 DIP-Switches .................................................................................................. 8

2.2.2 Status LEDs.................................................................................................... 8

3CONFIGURATION OF THE DEVICE............................................................................. 9

4ADDITIONAL INFORMATION.................................................................................... 11

5LIST OF FIGURES....................................................................................................... 12

6CONTACT................................................................................................................... 13

1000 BASE-T1 MediaConverter User Manual

1GENERAL INFORMATION

1.1 Functionality and Features of the 1000BASE-T1 Media

Converter

The Technica Engineering 1000Base-T1 MediaConverter converts the new Standard

1000Base-T1 to the widely known 1000Base-T and vice versa. Data Transfer is full

duplex in both directions.

Additional to this it has option to convert 100Base-TX to 100Base-T1 and vice versa.

The mode configuration can be done very easy by DIP Switch.

Features:

•1 Port Gigabit Ethernet 1000 BaseT/ Fast Ethernet 100BASE-TX

•1 Port 100/1000Base-T1 full duplex on a single unshielded twisted pair.

•Automotive Tyco Nano MQS Connectors for 100/1000Base-T1 and Power

Supply

•Robust steel case

•DIP Switches for easy configuration

Figure 1—2: 1000BASE-T1 MediaConverter

Figure 1—1: 1000BASE-T1 MediaConverter

1000 BASE-T1 MediaConverter User Manual

General Information:

Power requirement:

6,5 to 16 Volt DC (nominal 12 Volt DC)

Power consumption:

2 Watt

Weight:

0,25 kg

Size:

92 x 63 x 25 mm

International Protection:

IP 2 0

Operating Temperature:

-40 to +80 °Celsius

LINKS:

The User can download the latest firmware and documentation for the 1000BASE-T1

MediaConvert here:

https://technica-engineering.de/produkt/100base-t1-mediaconverter_bcm/

1.2 Warranty and Safety Information

Before operating the device, read this manual thoroughly and retain

it for your reference.

The latest documentation for the 1000BASE-T1 MediaConverter

can be downloaded here:

https://technica-engineering.de/produkt/1000base-t1-media-

converter/

Use the device only as described in this manual.

Use only in dry conditions.

Do not apply power to a damaged device.

Do not open the device. Otherwise warranty will be lost.

This device is designed for engineering purpose only. Special care

has to be taken for operation.

Do not use this device in a series production car.

As this device is likely to be used under rough conditions, warranty

is limited to 1 year.

Manufacturer liability for damage caused by using the device is

excluded.

1000 BASE-T1 MediaConverter User Manual

1.3 Declaration of conformity

Figure 1—3: Declaration of conformity

1000 BASE-T1 MediaConverter User Manual

2HARDWARE INTERFACES

2.1 Connectors

On the label on top of the device you can see an overview about all HW-Interfaces of

the 1000BASE-T1 MediaConverter.

2.1.1 nano-MQS Connector

The pinning of the ECU connectors is listed on the label on top of the device as well.

(See Figure 2—1).

The Connector color is black.

The power supply for the device is supplied by pin 20 (Ground) and Pin 18 (12Volt).

100/1000Base T1 is connected to pin 3(positive) and pin 5 (negative)

Warning: If you apply a voltage higher than 18 Volt, the device will be damaged!

Figure 2—1: Label of 1000BASE-T1 MediaConverter with pinning information

1000 BASE-T1 MediaConverter User Manual

Function

n.c.

100/1000 BaseT1 Positive

n.c.

100/1000 BaseT1 Negative

n.c.

Battery +12 Volt Input

n.c.

n.c

Battery Ground Input

Table 2—1: Pinning of black MQS connector

The Tyco Electronics (TE) nano Micro Quad Lock System (nano-MQS) is used.

Name

Picture

Part Number

20POS NANOMQS REC HSG

CODE A

2141404-1

NANOMQS RECEPTACLE

TERMINAL

2-1703930-1

Table 2—2: Parts of nano-MQS connector

http://www.te.com/usa-en/product-2141404-1.html

http://www.te.com/usa-en/product-2-1703930-1.html

http://www.te.com/usa-en/product-4-1579014-0.html

http://de.farnell.com/te-connectivity/2-1703930-1/contact-socket-

crimp/dp/2528666

Note: You can use the official Tyco tool for these crimp contacts:

TE CONNECTIVITY CS11K NANO-MQS, 0.13-0.35 SQ.M

TE Internal Number: 4-1579014-0

1000 BASE-T1 MediaConverter User Manual

Official Crimp Tool:

Name

TE CONNECTIVITY CS11K NANO-MQS, 0.13-0.35 SQ.M

TE Internal Number

4 -1579014 –0

Distributor

Börsig GmbH

www.boersig.com

Address

Siegmund-Loewe-Str. 5

74172 Neckarsulm

2.1.2 RJ45 Ethernet connectors

There is one RJ45 Standard Ethernet connector for Fast Ethernet (100BASE-TX).

2.2 Other Interfaces

2.2.1 DIP-Switches

The 1000BASE-T1 MediaConverter has two DIP-Switches for configuration (see

Chapter 3).

2.2.2 Status LEDs

The 1000BASE-T1 MediaConverter has two status LEDs at the frontside of the case

for the 1000BASE-T1 Port.

Upper LED:

Green Color. It is lit if there is a linkup on the 1000BASE-T1 port.

Lower LED:

Yellow Color. It is toggling if there is communication on the 1000BASE-T1 port

1000 BASE-T1 MediaConverter User Manual

3CONFIGURATION OF THE DEVICE

The 1000BaseT1 Media converter is configured by 2 DIP Switches on the front of the

device.

DIP-Switch

Status

Description

ON (up)

OFF (down)

100/1000 BASE-T1 Port is set to Master

100/1000 BASE-T1 Port is set to Slave

ON (up)

OFF (down)

The device is set to 1 Gbit Mode.

The device is set to 100 Mbit Mode.

Table 3—1: Configuration of DIP-Switches

Note: In a 100/1000 BaseT1 System, one device must be set to Master, the other link

partner must be set to Slave Mode.

1000 BASE-T1 MediaConverter User Manual

41000BASE-T1 Filter

The following 1000BASE-T1 Filter is used in the 1000BASE-T1 MediaConverter:

The Pulse AE5002 is used.

Figure 4—1: Used Filter in 1000BASE-T1 MediaConverter

Altri manuali per 1000Base-T1 SPY mini

Indice

Altri manuali Technica Engineering Convertitore multimediale

Technica Engineering

Technica Engineering 100BASE-T1 MEDIACONVERTER BCM Manuale utente

Technica Engineering

Technica Engineering USB-100BASE-T1 Manuale utente

Technica Engineering

Technica Engineering 1000Base-T1 SPY mini Manuale utente

Technica Engineering

Technica Engineering 100Base-T1 SFP Manuale utente

Technica Engineering

Technica Engineering MATEnet 100BASE-T1 Manuale utente

Technica Engineering

Technica Engineering 100Base-T1 SFP Manuale utente

Technica Engineering

Technica Engineering TE-1350 Manuale utente

Technica Engineering

Technica Engineering 1000Base-T1 SPY mini Manuale utente

Technica Engineering

Technica Engineering 100/1000BASE-T1 MEDIACONVERTER MATEnet Manuale utente

Technica Engineering

Technica Engineering USB 100BASE-T1 MEDIACONVERTER Manuale utente

Technica Engineering

Technica Engineering USB 100BASE-T1 MEDIACONVERTER Manuale utente

Technica Engineering

Technica Engineering 100BASE-T1 MEDIACONVERTER NXP Manuale utente

Technica Engineering

Technica Engineering 100/1000BASE-T1 MEDIACONVERTER MATEnet Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente