Technics SA-EH670 Manuale utente

AD0105109C2

Tuner/Amplifier

SA-EH670

Colour

(S)...................Silver Type

Areas

(E)...................Europe.

(EG).................Germany, Italy, France, Netherlands and Denmark.

(EP).................East Europe.

SPECIFICATIONS

Unauthorized copying and distribution isaviolation of law.

1. Before Repairs

1. Turn off the power supply. Using a10 , 10 Wresistor, connect

both ends of power supplycapacitors (C701, C703 and C702,

C704) inorder to discharge the voltage.

2. Before turning the power supplyon, after completion of repair,

slowlyapplythe primaryvoltage byusing apower supplyvoltage

controller to make sure that the consumed current at 50 HzinNO

SIGNALmode shouldbe shownbelow with respectto supply

voltage 230 V.

Powersupply

voltage AC 230 V

Consumedcurrent

50 Hz 70 ~ 300

2. Protection Circuitry

The protection circuitrymayhave operatedif eitherof the following conditions is noticed:

-Nosound isheard when the power isswitched ON.

-Sound stops during aperformance.

The functions of this circuitryis toprevent circuitrydamage if, forexample, the positive and

negative speakerconnection wires are shorted, orif speakersystems withanimpedance less

thanthe indicatedratedimpedance of this unit are used.

If this occurs, followthe procedures outlinedbelow.

1. Switch OFF the power.

2. Determine the cause of the problem and correct it.

3. Switch ONthe power once again.

Note:

When the protection circuitryfunctions, the unitwill not operate

unless the power isfirst switched OFF and then ONagain.

3. Accessories

-AC power supplycord / (RJA0019-1X)................................1pc.

-AMloop antenna set / (RSA0022-L)..................................1pc.

-FM indoor antenna / (RSA0007)......................................1pc.

-Speaker cords / (REE1057)....................................2pcs.

-Remote control transmitter / (EUR7702170)..............................1pc.

-Remote control batteries / (R6/LR6, “AA”, UM-3)...................2pcs.

Note: These are availableon sales route.

4. Location of Controls

5. Operation Checks and Component Replacement /

Procedures

-Thissection describes procedures for checking the operation of

the major printed circuitboards and replacing the main

components.

-For reassemblyafter operation checks or replacement, reverse the

respective procedures. Special reassemblyprocedures are

described onlywhen required.

5.1. Checking for the AC INP.C.B.

-Check the AC INP.C.B. as shownbelow.

5.2. Checking for the operation P.C.B.

-Follow the (Step 1) -(Step 3) of item 5.1.

-Check the operation P.C.B. as shownbelow.

5.3. Checking for the mainP.C.B.

-Follow the (Step 1) -(Step 3) of item 5.1.

-Follow the (Step 1) -(Step 6) of item 5.2.

-Check the mainP.C.B. as shownbelow.

5.4. Replacement for the regulator transistor

-Follow the (Step 1) -(Step 3) of item 5.1.

5.5. Replacement for the power IC

-Follow the (Step 1) -(Step 3) of item 5.1.

-Follow the (Step 1) -(Step 6) of item 5.2.

-Follow the (Step 1) -(Step 10) of item 5.3.

6. To Supply Power Source

This unit SA-EH670 is designedtooperate on powersuppliedfromsystemconnected. / For

systemconnection, referto Fig. 6-1.

Fig. 6-1.

Whenthe unit SA-EH670 has totest and service alone, use the following method tosupply

powersource.

1. Short the section between W902APin3and C740 (-) (GND). (Refer

to Fig. 6-2. )

2. Connect thisunitto an AC power supplycord. / (Thisunitcome to

stand-bymode.)

3. Turn the unitON.

Fig. 6-2.

Notes:

Use onlythismethod when checking the voltage.. / Incase of

checking the operations, use the system connections to supply

power source.

7. Self-Diagnostic Function

This unit is equippedwitha self-diagnostic function which, inthe event of a malfunction,

automaticallydisplays a code indicating the nature of the malfunction.

Use this self-diagnostic function whenservicing the unit.

7.1. To displaythe malfunction code

U70 CD:/ U70 DECK:

Automaticallydisplayson the tuner/amplifier when amalfunction

occurs. Refer to Fig. 7-1.

F61:

Automaticallydisplayson the tuner/amplifier when amalfunction

occurs. Refer to Fig. 7-1. Fig. 7-1.

7.2. To return to the normal display

1. For U70 CD/U70 DECK

-Press an anyoperation button on the tuner/amplifier.

-To re-displaythe code, switch the power off (POWER

STANDBYbutton), and then switch power back on again.

2. For F61

-IfF61 isdisplayed, the power will automaticallybe switched

off and the standbyindicator will light up.

-F61 will be displayed for 3seconds, and then the clock will be

displayed.

-To re-displaythe code, switch the power on. F61 will be re-

Indice

Altri manuali Technics Amplificatore

Technics

Technics SU-X820 Manuale utente

Technics

Technics SU-X901 - service Manuale utente

Technics

Technics SU-A808 Manuale utente

Technics

Technics SE-HD81 Manuale utente

Technics

Technics SE-A900S Manuale utente

Technics

Technics SU-8022 Manuale utente

Technics

Technics SU-R1 Manuale utente

Technics

Technics SE-R1 Manuale utente

Technics

Technics SA-CH950 Manuale utente

Technics

Technics su-v909 Manuale utente

Technics

Technics SE-CH610 Manuale utente

Technics

Technics SE-A5 Manuale utente

Technics

Technics SE-CH530 Manuale utente

Technics

Technics SE-CA10 - service Manuale utente

Technics

Technics SA-EH550 Manuale utente

Technics

Technics SUV-500 Manuale utente

Technics

Technics SU-C01 Manuale utente

Technics

Technics SU-A808 Manuale utente

Technics

Technics SU-G75 Manuale utente

Technics

Technics SU-A900 Manuale utente

Technics

Technics SECA-1060 Manuale utente

Technics

Technics SU-V6X - service Manuale utente

Technics

Technics SU-V500M2 Manuale utente

Technics

Technics SU-V2X Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente

Phonic

Phonic XP 3000 Manuale utente