Technika T835 Manuale utente

USER MANUAL

Digital TV Recorder

250Gb T835

For assistance, please call our Tesco Electrical Helpline on 0845 4566767

English - 1 -

Contents

Features ................................................................. 1

Accessories ............................................................ 2

Safety Precautions ................................................. 2

Power.................................................................. 2

Overview of the Remote Control ............................ 3

Connections............................................................ 4

Remote Control ...................................................... 5

Connection to the Tv .............................................. 5

Power Connection .................................................. 6

Power On-Off.......................................................... 6

Antenna Connection............................................... 6

Main Interface......................................................... 7

Menu System.......................................................... 7

Channel List........................................................ 7

Deleting Channels ......................................... 8

Renaming Channels ...................................... 8

Adding Locks to Channels ............................. 8

Setting Favourites .......................................... 8

Programme Guide .................................................. 8

TIMERS.................................................................11

RECORDINGS LIBRARY..................................... 12

Play Options: ................................................ 12

Main Title ...................................................... 13

Recording Title.............................................. 13

Chapter Options............................................ 13

SETUP.................................................................. 13

Recordings.................................................... 13

Max Time Shift .............................................. 14

Auto Discard ................................................. 14

Format Disk .................................................. 14

Hard Disk Info ............................................... 14

Recording Format ......................................... 15

Conﬁguration ........................................................ 15

TV Type......................................................... 16

Favourite Mode............................................. 16

Channel List.................................................. 16

Scan Encrypted ............................................ 16

Auto Power Down ......................................... 16

Receiver Upgrade......................................... 16

Parental Locking ........................................... 16

Menu Lock .................................................... 17

Set Pin .......................................................... 17

Low Power ................................................... 17

Language...................................................... 17

Message ....................................................... 17

Speciﬁc Functions of Remote Control .............. 18

Time Shifting(Pause Live Recording) ............... 19

NOTES ................................................................. 20

General troubleshooting ....................................... 21

GENERAL CHARACTERISTICS ......................... 22

Features

• DVB

• 200 Channels

• DVB 7 days event information (7 days EPG)

• TV scart (with RGB and CVBS support)

• Record timer via 7 day EPG

• Automatic search for all channels

• Timer can be used either for recording or as a

sleep timer

• Timer function (TV timer) programmable via EPG

• Favourite list

• Parental lock options at different levels

• DVB-T Compliant

•UHF-IV and UHF-V; 470-862 MHz, 8MHz bandwith

• Supports 16-, 64-QAM modulations

• Manual and automatic search options

• VIDEO & OSD :

• Video: MPEG2, PAL, 4:3/16:9

• Automatic day light saving time updating.

• Decoding & Video Out: PAL

• Audio: MPEG-1 layer I / II, MPEG-2 layer II, MPEG-2

AAC, MPEG-4 AAC

• Multi-format audio decoder

• Multi language audio support (up to 10)

• Audio mute and volume control

• Time shift – pause live TV.

• PIP (Picture in picture)

• Freeview Playback 2 support.

• Auto power down

• Standby Low Power Consumption (Less than or

equal to 1 W)

English - 2 -

Accessories

Remote Controller

RF Cable

Batteries (2 X AAA)

Instruction Book

Safety Precautions

Power

• Always use the provided AC adaptor.

• Operate only from the power source speciﬁed on

the AC adaptor.

• The power adaptor may become hot during normal

operation. This is not a malfunction.

• Please make sure that the adaptor is not covered

while in operation. Leave a space of 15 cm

(minimum) around the AC adaptor.

• The rating information and safety caution of the AC

adaptor are provided on the adaptor.

WARNING: When the set is not in use for a long

time, disconnect from the power.

.Power Cord

Do not place the unit, a piece of furniture, etc., on the

power cord (mains lead), or pinch the cord. Handle

the power cord by the plug. Do not pull out the plug by

tugging the cord and never touch the power cord when

your hands are wet as this could cause a short circuit

or electric shock. Never make a knot in the cord or tie

it with other cords. The power cords should be routed

in such a way that they are not likely to be stepped on.

A damaged power cord can cause ﬁre or give you an

electrical shock. Check the power cord once in a while.

When you ﬁnd it damaged, ask closest service agent for

help. When the AC power cord needs to be changed, it

should be done at a qualiﬁed service shop only.

• Please do not place the set in a place subject to

direct sun light, excessive dust or mechanical shock

or in a location near heat sources.

• Should any solid object or liquid fall into the cabinet,

unplug the apparatus and have it checked by qualiﬁed

personnel before operating it any further.

Apparatus shall not be exposed to dripping or

splashing and no objects ﬁlled with liquids, such as

vases, shall be placed on the apparatus.

The mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

CAUTION

Batteries shall not be exposed to excessive heat such

as sunshine, ﬁre or the like.

English - 3 -

Overview of the Remote Control

Teletext

Swap key

Teletext

TV Swap

PIP mode

(Opens the PIP window)

PIP channel -

(Channel down in the PIP window)

PIP channel +

(Channel up in the PIP window)

English - 4 -

Connections

FRONT VIEW

BACK VIEW

ON/OFF PROG UP

PROG DOWN

250Gb T835 Digital TV Recorder

12345

35026858

SCART (TV)

ANTENNA

OUT DC IN

OPTICAL

AUDIO OUT

1. ANTENNA IN : Aerial input

2. AERIAL OUT :To watch analogue channels on the TV

3. OPTICAL AUDIO : Optical Digital Audio Output

4. TV SCART : TV SCART connection

5. POWER SUPPLY : DC IN (12V)

Be sure that you make all the cable connections. Then plug the unit into the mains supply , a red light will

be seen on the front panel. (Standby mode). When the set-top-box is ﬁrst powered up please wait for a while

before activating the receiver since booting of software will take some time. Then, you can turn on your

digital set-top box by pressing the Standby button on the remote control. The red light on the front panel will

change to off (Power on mode)

English - 5 -

Remote Control

First open the battery cover on the underside of the remote control. Put in both batteries 1.5Volt (RO3/AAA)

referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again. While using

the remote control, direct it towards the front side of the receiver. If the remote control does not work or the

chosen function does not work, the batteries are most probably exhausted and they should be replaced as

soon as possible. Please use only the leak proof batteries. It is best to remove the batteries from the remote

unit if you will not be using the remote control unit for long time.

Connection to the Tv

35026858

SCART (TV)

ANTENNA

OUT DC IN

OPTICAL

AUDIO OUT

Connect your set-top box with a scart cable using the TV scart connector on the rear panel to your television’s

scart connector. The set-top box gives RGB or CVBS output. If you want to get the picture via scart connector

and your TV’s scart connector has an RGB input, then you can switch your digital set-top box to RGB mode, by

toggling TV out menu to RGB mode, in conﬁguration menu. So, you will be able to achieve high performance

from your digital set-top box.

English - 6 -

Power Connection

IMPORTANT: The set-top box is designed to operate on 12 V DC. For this, an adaptor is

used which gives 12 V voltage. Connect this adaptor to a system that supplies 220-240V

AC,50Hz.

• After unpacking, allow the set-top box to reach the ambient room temperature before you connect the set

to the mains.

Power On-Off

Connect all cables before plugging into the mains. After plugging in the mains cord of the set-top-box to the

mains supply, a light will be seen on the front panel (Standby mode). When the set-top-box is ﬁrst powered

up please wait until the box is initialized before activating the receiver since booting of software will take some

time. Make sure that all cable connections are in place. Plug the mains. Please wait until unit is initialized.

This may take almost a minute.

This product conforms the latest European Union Power Consumption Regulations and features low power

standby mode. Product enters into the low power standby mode approximately 2-3 minutes later after you

press standby button to turn off the unit. Until low power mode is activated, clock will be displayed at the

display. When the low power mode is activated, display will be shut down. When you press standby button

during low power mode, it may take a minute until product is initialised. However if you press standby button

before low power mode is activated unit will be initialized in a couple of seconds (Active standby mode).

Although it is not recommended for enviromental reasons, you may disable low power mode in your product

at setup –conﬁguration menu.

Auto Power Down:

This box will automatically switched from active mode into standby mode, after less than three hours in active

mode, following the last user interaction and/or a channel change with an alert message two minutes before

going in to standby mode. The Automatic power-down will be set as default and the user will be able to change

Automatic power down to on or off in the menu

Important Note : If there is any ongoing programme recording or if any EPG programme recordings and/or

manual recordings is set to a nearby time, the unit does not switch to low power mode and remains in active

standby mode until recording tasks have been ﬁnished. At low power mode, the unit initializes a couple of

minutes before the actual time of the incoming recording task.

Important Note : The unit initializes time to time to receive updates from EPG broadcast in order to sycnronize

EPG recording tasks properly. After getting updates, the unit switches to low power mode automatically. This

takes a short while and it is not a malfunction.

Antenna Connection

35026858

SCART (TV)

ANTENNA

OUT DC IN

OPTICAL

AUDIO OUT

English - 7 -

Main Interface

When the box is switched on from stand-by mode for

the ﬁrst time or after ﬁrst time installation, the following

menu message will be displayed.

After hard disk initializing process, First Time

Installation Menu window is displayed on the screen.

In this window, set the TV type with “ ”/“ ” keys and

press OK to continue.

Then “Do you want to start an automatic channel

scan?” pop-up menu is displayed. Auto search can

be started by selecting the “Yes” button. The box

will automatically ﬁnd the channels and store them

for you.

To start installation process, select “Yes”, to cancel

select “No”.

The set-top box will automatically tune to the channels.

You can press the “MENU” button at any time during

the process.

Menu System

Main menu is accessed by pressing the MENU key

on the remote control. Navigate with “ ”/“ ” keys

among the menus and press OK to activate menus.

In some sub-menus, press the BACK button to return

to the previous menu, otherwise, use it to exit from

the menu. In all menus there is an Info banner at the

bottom of the screen. These are functions that can be

used in the current menu.

The Main Menu is accessed, pressing the MENU

button. The items accessed through the Main Menu

are:

1.)Channel List

2.)Programme guide

3.)Timers

4.)Recording Library

5.)Setup

Channel List

Channel list is the place where the channels are

managed. The following operations can be performed

in this menu:

1. Navigating the whole list of channels

2. Deleting unwanted channels

3. Renaming channels

4. Adding locks to channels

5. Setting the favourite list

Channel table is the place where the channels are

managed.

English - 8 -

Navigating the Entire Channel List

In the channel table “ ”/“ ” moves the selection to the

previous or next .To exit menu and watch a speciﬁc

channel highlight it using, “ ”/“ ” then press OK key

while the “SELECT” option at the bottom of the screen

is highlighted. If the selected channel is password

protected then a pop up menu is displayed. If the

correct code is entered, the selected channel can be

watched. You can now select another channel in the

list. The scroll Bar in middle of the screen shows relative

position of the currently visible channels with respect to

the whole list.

Deleting Channels

To delete a channel highlight it using “ ”/“ ”, then

highlight the “Delete” button using “ ”/“ ” and press

OK. A message is displayed to conﬁrm your decision,

if you still want to delete select “YES”, with the <

> buttons or the operation will be cancelled if you

select “NO”.

Renaming Channels

To rename a specific channel, the name must be

highlighted and then select the “Edit Name” button

and OK button must be pressed. Following previous

procedure, the name appears on the middle of the

screen with the ﬁrst character highlighted. Now “ ”/“

” moves to the previous/next character. “ ”/“ ” toggles

the current character, i.e., ‘b’ character becomes ‘a’ on

“” and ‘c’ on “ ”. Pressing the numeric buttons ‘0...9’

replaces the highlighted character with the characters

printed above the button one by one as the button is

pressed. Pressing MENU cancels the editing and OK

saves the new name.

Adding Locks to Channels

Channel Locking provides a password-protected

access to channels selected by parents. In order to

lock a channel you should know the parental Lock

password (set to 0000 in the factory and can only be

changed from the Conﬁguration Menu), then highlight

the channel to be locked and select the “Lock” button,

when OK is pressed a password dialog is displayed.

Enter the parental Lock code, press OK and the Lock

icon will be displayed in front of the selected channel.

Repeat the same operation to cancel the Lock.

Setting Favourites

Favourite list provide an easy way to group programmes

in a customizable way. In the channel list Table menu

the programmes can only be added or removed from

a favourite list.

In order to add or remove a programme from a

favourite list, highlight the “Favourite” button using “

”/“ ” buttons, the favourite submenu will be displayed.

Then select the programme to be added / removed

to/from the favourite list using “ ”/“ ”, choose the

favourite list name (in which the programme will be

added) using “ ”/“ ” buttons then press OK. The

favourite programme icon will be displayed or removed

in/from the selected programme bar. Pressing Menu

button saves all your settings.

Pressing Menu button saves all your settings.

Programme Guide

Press GUIDE button to view the EPG menu. It is able

to get Information of the channel - programmes weekly

by means of 7-DAY–EPG. All programmes of channels

are displayed. The current programme is highlighted

and if you press the info button, there will be a brief

information about the programmes of the channel, such

as: name, short/extended event description, start & end

time. By pressing “ ”/“ ” buttons continuously the time

scale can be changed. If there is any event information

English - 9 -

data available only programme names and dates are

displayed. Across the bottom of the screen there is an

info bar showing all the available commands which are

listed below.

RED BUTTON (SHRINK) : make the info boxes

smaller.

GREEN BUTTON (EXPAND) : make the info boxes

larger.

YELLOW BUTTON(PREV DAY) : displays the

programmes of previous day.

BLUE BUTTON (NEXT DAY) : displays the

programmes of next day.

INFO (DETAILS) : displays the short extended

programmes in detail.

OK (OPTIONS) : shows the programme options

include “Select Channel,

“Record / Delete Timer”, “Series Record / Series

Delete Timer”, “Check Conﬂicts” and “Set Reminder

/ Delete Reminder”.

NUMERIC BUTTONS (JUMP) : go to preferred

channel directly via numeric buttons.

(RECORD) : the unit will record the selected

progamme.

(PAGE LEFT) : moves the page to left.

(PAGE RIGHT): moves the page to right.

TEXT (SEARCH) : activates “Search” window.

X(NOW) : shows the current programme.

Programme Option

In EPG menu, press the OK button to enter the

“Programme Options” menu.

Select Channel

In EPG menu, using this option, you can switch to

channel of the programme which is selected.

Record/Delete Timer

In EPG menu, after you have selected a programme,

press the OK button and select the “Record” option

in the menu which appears and press the OK

button again. So a recording is set to the selected

programme. This option operates like the RECORD

button.

To cancel an already set recording, highlight that

programme and press the OK button and select

the option “Delete Timer”. The recording will be

cancelled.

Record Series/Delete Series Number

In EPG menu, after you have selected a programme,

press the OK button and select the “Record Series”

option in the menu which appears and press the

OK button again. So a series recording is set to

the selected programme. With this feature, you can

record a programme and all of it’s following parts

within 7 days. The information belonging to the

selected programme will be saved from the software

and following parts of the selected programme

which are not included in the period of 7 days, will be

automatically added day by day. The letter “s” denotes

that these recordings are series records.

To cancel an already set series recording, highlight

that programme and press the OK button and select

the option “Delete Series Timer”. The recordings will

be cancelled.

Note: Series programme information should be

broadcasted by the broadcaster

Check Conﬂicts

A conﬂict is caused, if more than two programmes are

set for recording in the same time interval or if two

reminders have the same starting time. In the EPG

menu, press the OK button. In the following window,

select the option “Check Conﬂicts” and press again

the OK button. You will enter the “Too Many Timers”

window.

Indice

Altri manuali Technika Registratore digitale

Technika

Technika AEDTR160S7 Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente