Technische Alternative UVR67 Manuale utente

11111111111111111111111

Please read before commissioning!

This booklet explains the basic operation of the UVR67 controller. More detailed information on op-

eration, programs and installation can be found in the enclosed booklets or on www.ta.co.at.

Scan this QR code for a link to a video tutorial on our official YouTube

channel! (German only)

Basic operation

The display (1) on the front shows information about sensor values, menu position, parameterisa-

tion, etc.

The bar (2) on the right of the display moves along with the vertical position in the currently open

menu. (Scroll bar)

The dial (3) to the right of the display is used for navigation. A clockwise rotation moves you down

the menu; anti-clockwise moves you up.

Pressing the dial (3) opens the selected menu/allows you to change the selected value/parameter.

(= Enter button)

Pressing the button (4) to the left of the dial exits a menu. (= Back button)

Pressing "Enter" (3) or "Back" (4) relates to the value/menu item with a border around it on the dis-

play.

Technische Alternative RT GmbH UVR67

A-3872 Amaliendorf, Langestraße 124

Tel +43 (0)2862 53635 [email protected] Manual Version

1.05

User levels and password entry

The majority of all setting options are password-protected to prevent unauthorised persons from op-

erating the controller. There are three user levels:

•User

• Can change time and date information, and otherwise only view values.

• Technician

• Additional access to the technician level, where e.g. parameters and manual mode of the

outputs can be changed.

•Expert

• Access to all setting options on the controller.

The expert password is therefore required to be able to operate the controller fully. It is factory set

to 64.

Example: Password entry for expert access and program selection

Turn the dial clockwise until there is a border around the entry User in

the main menu. To confirm, press the dial (= Enter key).

The active user is always shown in bold in this menu. In the illustra-

tion this is the User.

Turn the dial clockwise until there is a border around Expert. Press

the dial to confirm.

The password query for expert access appears. Enter the password

digit by digit. To do so, press the dial, which opens a column for

selecting the first digit.

Turn the dial clockwise to scroll down until the required number is

highlighted. In the example, the default password for expert access is

entered, 64. You therefore scroll to the first digit 6and confirm by

pressing the dial.

The first digit has been entered.

To enter the second digit, turn

the dial one notch clockwise. The

arrow moves to the blank space

next to the digit you have already

entered.

Press the dial to open the entry again and select 4. Press the dial to

confirm.

Once the full password has been entered, the entire entry still needs

to be confirmed. Turn the dial clockwise until there is a bold border

around the tick. Then press the dial.

In the example, the Expert is now shown in bold; there is now expert

access to the controller. If the expert is not shown in bold, the pass-

word was not entered successfully. The expert password may have

been changed by another user.

The settings that can now be made with expert access are in a differ-

ent menu. Press Back to return to the main menu. From there, navi-

gate to the item Settings (turn the dial anti-clockwise to navigate

upwards in the menu).

Press the dial to open the menu.

The items Technician level and Expert level are now available.

Technician level contains settings such as parameters (temperature

thresholds, etc.), time programs and datalogging.

Expert level contains the program selection, settings for inputs and

outputs, and other fundamental points.

Go to the program selection: Turn the dial clockwise until there is a

border around Expert level. Press the dial to open the expert level.

This menu contains a large number of settings. In our example, the

program is to be changed, so the menu Programming settings is

opened.

When making any settings and carrying out any installation work, please observe the other enclosed

instructions, especially the safety instructions they contain.

Subject to technical modifications as well as typographical and printing errors. This manual is only

valid for devices with the corresponding firmware version. Our products are subject to constant tech-

nical advancement and further development. We therefore reserve the right to make changes without

In this menu you need to look out for the bold border again. In the ex-

ample there is a border around Program. The number 0below it is the

set value.

If the program is to be changed, press the dial in the usual way while

the bold border is shown around "Program".

The display 0-999 is the setting range. The number below this (with a

red border) is the current value.

If the dial is turned clockwise, the program number is increased by one

with each notch. Turn anti-clockwise to decrease the number.

Once the required number has been reached, confirm by pressing the

dial.

Press Back to cancel the entry.

The program has been set successfully.

After setting the program, the Pa-

rameters at the Technician level

need to be adapted according to

the selected program and the local

conditions.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Technische Alternative Controllori

Technische Alternative

Technische Alternative UVR 63 Manuale utente

Technische Alternative

Technische Alternative UVR610S-MODB Manuale utente

Technische Alternative

Technische Alternative UVR16x2 Manuale utente

Technische Alternative

Technische Alternative UVR610S Manuale utente

Technische Alternative

Technische Alternative UVR16x2***-D Istruzioni operative

Technische Alternative

Technische Alternative UVR 63 Manuale utente

Technische Alternative

Technische Alternative UVR610S-OD-MODB Manuale utente

Technische Alternative

Technische Alternative HZR 65 Manuale utente

Technische Alternative

Technische Alternative UVR61-3 Manuale utente

Technische Alternative

Technische Alternative UVR610 Manuale utente

Technische Alternative

Technische Alternative UVR 63H Scheda tecnica

Technische Alternative

Technische Alternative UVR65 Manuale utente

Technische Alternative

Technische Alternative UVR1611K-N-D Manuale utente

Technische Alternative

Technische Alternative uvr1611 Manuale utente

Technische Alternative

Technische Alternative uvr1611 Manuale utente

Technische Alternative

Technische Alternative UVR610K Manuale utente

Technische Alternative

Technische Alternative UVR610K-OD Manuale utente

Technische Alternative

Technische Alternative uvr1611 Manuale utente

Technische Alternative

Technische Alternative UVR610S-OD Manuale utente

Technische Alternative

Technische Alternative UVR610 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente