Techsan I&C LM1530A Manuale utente
FCC ID : RJ5LM15
REPORT NO. : HCT-F04-0502 HYUNDAI C–TECH
ATTACHMENT E.
- USER’S MANUAL
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the
presence of uninsulated“dangerous voltage”within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
“WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not
Expose This Apparatus To Rain Or Moisture.”
“Apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the apparatus.”
“CAUTION - These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless you are
qualified to do so.”
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
WARNING & CAUTION
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any of the ventilation openings. Install in accordance with the
manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. When the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use the attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods
of time.
14) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
FCC (Federal communication commission) Information
T
his product has been tested and found to comply with the limits for a TV
Broadcast Receiver, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This product generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. If this product does
cause or receive interference, which can be determined by turning product off and
on, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the TV antenna.
Increase the separation between TV and other product.
Connect TV into separate outlet from other product.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this product.
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
Interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
Not installed and used in accordance with the instructions, may cause harmful
Interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
Installation.
If this equipment does cause harmful interference to radio or television reception,
Which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
Compliance could void the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
1. Packing List
2. Safety Instructions
3. Features
4. Installation
4-1 Monitor Description
4-2 Connecting To The Computer
5. Monitor Adjustment
5-1 OSD Menu Description
5-2 Accessing the OSD Menu
5-3 OSD Menu Descripyion
6. Specifications
6-1 Monitor Specification
6-2 Video Input Connector
6-3 Resolutions Supported
7. Troubleshooting
8. Descriptions of Technical Terms
1
Your new‘LCD Monitor’should contain the following items:
- LCD Monitor
- AUDIO CABLE
- 15pin D-SUB Signal Cable
- Owner’s Instructions
- Power Cord
2
※The power cord may be changed to accommodate electrical outlets worldwide.
1
Packing List
LM1530A
15pin D-SUB Signal Cable
AUDIO CABLE
Power Cord
Owner’s Instructions
3
Do not place heavy objects on the power cord.
Do not use your monitor near water.
Turn off the monitor if there is thundering and lightening.
Do not open your monitor. There are no user serviceable parts inside.
Opening the case might expose you a hazardous shock.
Do not place the monitor on an unstable table or stand.
Do not insert small conductive objects into the monitor. They might cause
a short or a hazardous shock.
Adjust the height of monitor so that the top of the screen is below
approximately 10 degrees.
If reflected light makes it hard to see the screen, use a glare filter.
Clean the LCD screen of the monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaner or solvent, such as benzene.
Do not operate the monitor in a place that is extremly hot, humid or dusty.
- Proper temperature: 5 ~ 35 ℃
- Humidity: 20 ~ 80 RH
Safety Instructions
2
4
Screen: 15.0”viewable XGA (1024*768) resolution LCD module and
space-saving slim design.
Plug and Play Function: Implementation of DDC 1/2B(Display Data
Channel 1/2B). Connected to the computer, the monitor automatically
informs the host of its compatibility over DDC communication channel.
VESA Wall Mount: This allows for the monitor to be mounted on the wall
or an arm using any third party compliant device.
OSD (On Screen Display) Menu Controls: This allows users to adjust the
screen simply by selecting menu items and ranges on the monitor’s
screen.
Auto-Adjustment Controls: Automatically can adjust screen size, clock
and clock phase, etc.
VESA DPMS (Display Power Management Signaling): This provides
innovative power-saving methods that allow the monitor to shift
automatically to a lower power consumption mode while it has power but
not in use.
Features
3
5
4-1. Monitor Description.
Installation
4
POWERBUTTON
MENU
EXIT
◀
▶AUTO
15-pin D-Sub
Signal Connector
DC Input Connector
Audio Input
Indice
