Techspan TE1600 Manuale utente
T E C H S P A N H O T A I R P L A S T I C W E L D I N G T O O L
t y p e T E 1 6 0 0
OPERATING INSTRUCTIONS
Please read operating instructions carefully before use and keep for future reference.
Power W 1600
Voltage V 230 50/60Hz
Temperature C 20 - 600
Airflow l/min. 230
Noise dB 60
Weight kg 1.4 with 3m cable
Dimensions mm Handle 55mm,
345x100 dia
Electrical Safety : Double insulated
Test Marks : CE European Conformity
Designed & Developed in Switzerland
Made in PRC
T e c h n i c a l D a t a
Applications
Plastic welding
thermoplastics, pipes, profiles, sheet, moulded parts, flooring, tarpaulins, geomembranes,
roofing membranes
Heating
forming, bending, expanding
Drying
water damp surfaces and joints
Shrinking
heat-shrink sleeves, film, tapes, solder sleeves, moulded shrink parts
Ignition
wood furnaces, coal furnaces
Soldering
soldering and desoldering
Activating
solvent-free adhesives, removal of self-adhesive labels / signwriting, hot-melt glue
De-icing
frozen parts, water pipes
O P E R A T I N G I N S T R U C T I O N S - T E C H S P A N T E 1 6 0 0 P L A S T I C W E L D E RO P E R A T I N G I N S T R U C T I O N S - T E C H S P A N T E 1 6 0 0 P L A S T I C W E L D E R
New Zealand:
P O Box 15262, New Lynn, Auckland
Ph: ++64 9 8276567 Fx: ++64 9 827 6596
info@plasticweldingtools.co.nz
Australia:
P O Box 5287, Brisbane, QLD 4069,
Ph: 1-800 148 791 Fx: 1-800 148 799
info@plasticweldingtools.com.au
This Techspan TE1600 tool is guaranteed for 1 year from the date of purchase
against electrical breakdown or mechanical failure caused through defective
material or workmanship, provided the failure is not the result of misuse. In the
event of failure covered by this Guarantee, the tool must be returned freight paid
to the supplier, with this card and proof of purchase, for inspection, and will be
replaced or repaired at our option. Heating elements, and wearing parts, brushes,
bearings etc are not covered by this guarantee.
Type : Techspan TE1600 Plastic Welder 1600W 230V 50Hz
Date purchased :
Customer :
Supplied by : TECHSPANGROUP (Plastic Welding Tools P/L)
Guarantee
Plastic Welding Tools
Australia
www.plasticweldingtools.com.au
New Zealand
www.plasticweldingtools.co.nz
New Zealand:
P O Box 15262, New Lynn, Auckland
Ph: ++64 9 8276567 Fx: ++64 9 827 6596
info@plasticweldingtools.co.nz
Australia:
P O Box 5287, Brisbane, QLD 4069,
Ph: 1-800 148 791 Fx: 1-800 148 799
info@plasticweldingtools.com.au
Plastic Welding Tools
Australia
www.plasticweldingtools.com.au
New Zealand
www.plasticweldingtools.co.nz
Description
1 Nozzle (LE100303 plastic welding nozzle shown)
2 Clamp screw for nozzle
3 Element housing / protective sleeve
4 Impellor housing
5 Rubber tool rest
6 Handle
7 Potentiometer for temperature adjustment
8 Mains cable
9 Air filter
10 On/Off Rocker Swith
11 Potentiometer for temperature adjustment
To operate the tool
1 Fit appropriate nozzle (1,2) as required.
2 Connect tool to the mains (single phase, 230 volt, 50 Hz, 10 amp
3 Adjust hot air temperature by turning the potentiometer (11)
4 Turn on switch (10) and allow tool to come up to temperature (approx. 2 mins)
5 After use always allow tool cool down. This will preserve the heating element
6 For plastic welding training contact Techspan or approved service centre.
1 2 3 4 5 6 7 8 9 10 11
O P E R A T I N G I N S T R U C T I O N S - T E C H S P A N T E 1 6 0 0 P L A S T I C W E L D E R
O P E R A T I N G I N S T R U C T I O N S - T E C H S P A N T E 1 6 0 0 P L A S T I C W E L D E R
1 The carbon brushes of the tool’s motor should be checked after about 1200 hours
running time by your service centre.
2 Repairs must be carried out by Techspan service centres. They guarantee a specialized and reliable
repair service.
3 The warranty will be void if repairs have not been carried out by a Techspan service centre using
Techspan spare parts.
1 Before changing nozzles, allow the tool to cool down, or use combination pliers
2 Do not touch hot nozzle (1,2) and only place the nozzle on a heat resistant surface
due to fire hazard.
3 The nozzles are easily pushed onto the element housing (3) and are then secured by tightening the
clamp screw (2) with a screwdriver.
4 Only Techspan nozzles and accessories should be used.
Maintenance
1 The welding tool’s air filter (9) must be cleaned with a brush if necessary.
2 A wire brush should be used for cleaning the welding nozzle (1)
3 Check power supply cable (8) along the full length, as well as the plug, for any possible electrical or
mechanical damage.
Accessories
1 The Techspan plastic welder is supplied without nozzles, which are sold separately.
2 Only Techspan nozzles and accessories should be used.
Service and repairs
Changing Nozzles
Guarantee and Liability
Guarantee and liability are in accordance with this guarantee certificate and the current terms and conditions
of sale. Techspan rejects any guarantee claims for tools which are not in original condition. The tool must
never be modified.
Caution - Risk of Serious Injury and property damage
Always lie the tool on a non-flammable surface & keep the hot air stream well away from combustible materials, includ-
ing combustible materials hidden behind ceilings, walls, cavities or floors. Do not point the hot air stream at the same
spot for extended periods. Incorrect use can cause fire. Do not touch the element housing or nozzle with any part of the
body during use as they get very hot and there is a danger of serious injury by burning. When working with plastics,
varnish or similar materials vapours/gases/smoke develop which can be harmful. Do not breathe in vapours/gasses/
smoke as they can be highly toxic. Always provide good ventilation of the working area with an extraction system and/or
wear a respirator. Keep the unit dry. Do not use in the rain or in damp conditions. Always store the unit in a dry place.
*Setting Deg. C
1 20
2 200
3 350
4 450
5 540
6 570
7 590
8 610
9 620
10 650
New Zealand:
P O Box 15262, New Lynn, Auckland
Ph: ++64 9 8276567 Fx: ++64 9 827 6596
info@plasticweldingtools.co.nz
Australia:
P O Box 5287, Brisbane, QLD 4069,
Ph: 1-800 148 791 Fx: 1-800 148 799
info@plasticweldingtools.com.au
Plastic Welding Tools
Australia
www.plasticweldingtools.com.au
New Zealand
www.plasticweldingtools.co.nz
New Zealand:
P O Box 15262, New Lynn, Auckland
Ph: ++64 9 8276567 Fx: ++64 9 827 6596
info@plasticweldingtools.co.nz
Australia:
P O Box 5287, Brisbane, QLD 4069,
Ph: 1-800 148 791 Fx: 1-800 148 799
info@plasticweldingtools.com.au
Plastic Welding Tools
Australia
www.plasticweldingtools.com.au
New Zealand
www.plasticweldingtools.co.nz
Altri manuali Techspan Sistema di saldatura
