Tecnosicurezza KL3909 Istruzioni per l'installazione

User Instruction

IU_KL3909_00_eng Page 1 of 2

CHARACTERISTICS

The KL3909 is a key changeable key lock that can be fitted

in any direction (HR, HL, VU or VD). Holes are supplied in

bolt (end) to cater for boltwork extensions. The load on the

bolt must not exceed 8N. Take care during installation so that no foreign objects

such as paint flakes, weld spatter or metal shavings, end up in the lock case. Any

modifications made to the lock during mounting will void manufacturers warranty.

The lock must only be serviced by qualified engineers/technicians. The lock should

never be lubricated. Any improper service or lubrication will void manufacturer

warranty. Test lock functions before mounting. Please read through the full mounting

instructions before mounting the lock. Locks not fitted in accordance with this

instruction are not covered by manufacturers warranty.

KL3909 lock is certified: VdS class 2 and EN1300 class B – UL Group 2M

DIMENSIONS AND MOUNTING INSTRUCTION

Make sure mounting surface is clean and flat. Mounting pattern follows industry

standard. Measure, mark and drill mounting holes and keyhole. Key hole Ø12mm

and de-burr hole at both ends (if special key guide is used follow instructions for said

article). Only use the delivered 3 (three) M6 mounting screws and fix the lock on the

safe door. (Torque approximately 3,5 Nm).Tap mounting holes according to screws.

Fasten lock with supplied screws. Always use Lock-Tite™ or equivalent on mounting

screws and bolt attachment screws.

The mounting dimensions of the lock are standard (magic module).

User Instruction

IU_KL3909_00_eng Page 2 of 2

Fit escutcheon on outside of safe (if used) making sure that change index is properly

aligned according to lock handing.

Check operation with key. There must be no dragging or binding againstany part of

the boltwork. If back panel is to be modified to accept change key, drill and de-burr

hole. Place change sticker,correctly aligned, on back panel.

Check the function of the lock at least 3 times before the safe door is closed!!

USER INSTRUCTIONS

Open the Lock: (Use Opening Index)

The lock is delivered in factory-mode, the opening of which

involves the use of a "neutral key" (encoded 0-0-0-0). Insert

the neutral key or, later, the stored key and open the lock

by turning the key clockwise.

To set a new key after installation, you need the neutral

key, key exchange and the new opening key.

Changing the opening key

• Insert the neutral key (coded 0-0-0-0) or, later, the

opening stored key.

• Slowly turn the top lever clockwise until "click" and stop it

in that position. Do not retract the bolt.

• Insert the change key into the hole on the back of the lock

and turn it clockwise until it stops. Do not force the change

key.

• Remove the old key opening after rotating anticlockwise.

• Insert the new key and turn it slowly clockwise until the

"click" and stop it in that position. Do not force the key.

• Turn the change key clockwise and remove.

Perform various tests of opening before closing the safe.

Indice

Altri manuali Tecnosicurezza Serratura

Tecnosicurezza

Tecnosicurezza DigiTech Manuale utente

Tecnosicurezza

Tecnosicurezza Pulse Pro Manuale utente

Tecnosicurezza

Tecnosicurezza MiniTech Istruzioni operative

Tecnosicurezza

Tecnosicurezza Pulse Pro T6630/GRP Manuale utente

Tecnosicurezza

Tecnosicurezza MiniTech Manuale utente

Tecnosicurezza

Tecnosicurezza MiniRotoboIt UR4020 Guida utente

Tecnosicurezza

Tecnosicurezza TechMaster T9530/GR Manuale utente

Tecnosicurezza

Tecnosicurezza MiniTech Manuale utente

Tecnosicurezza

Tecnosicurezza Pulse Pro Manuale utente

Tecnosicurezza

Tecnosicurezza DigiTech Manuale utente

Tecnosicurezza

Tecnosicurezza Pulse T6430 Manuale utente

Tecnosicurezza

Tecnosicurezza T6530/DL Manuale utente

Tecnosicurezza

Tecnosicurezza MiniTech T52 Series Manuale utente

Tecnosicurezza

Tecnosicurezza TechMaster Manuale utente

Tecnosicurezza

Tecnosicurezza Pulse Pro Manuale utente

Tecnosicurezza

Tecnosicurezza MiniTech TSMINI-4 Manuale

Tecnosicurezza

Tecnosicurezza T9510/BR Manuale utente

Tecnosicurezza

Tecnosicurezza TechMaster Manuale utente

Tecnosicurezza

Tecnosicurezza Pulse Manuale utente

Tecnosicurezza

Tecnosicurezza TechMaster Manuale utente

Tecnosicurezza

Tecnosicurezza StraightBolt EM3520 Manuale utente

Tecnosicurezza

Tecnosicurezza Pulse Manuale utente

Tecnosicurezza

Tecnosicurezza AuditLine T6530/DL Manuale utente

Tecnosicurezza

Tecnosicurezza TechMaster Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente