TECOM M13 Manuale utente
M13 Video Door Phone
User Manual
(Draft)
V0.7
By Kevin Tsou
20140707
M13 IP Video Door Phone Features
M13 Video door phone features
IP addressable video door station
DI / DO dry control for door release
Digital color video camera, NTSC / PAL
Call button, LED indication
Built-in RFID sensor module
Uses 12~24V DC power supply
Door Phone unit
IP addressable
Wall mount
Flush mount
The Front-View of the M13 Video door phone
•
The figure below illustrates the front view of the M13. With the point numbers,
you can find its name and a simple description of the part in the following table.
(Wall Mount Type)
(Flush Mount Type)
The Back-View of the M13 Video door phone
(Wall Mount Type) (Flush Mount Type)
M13 Video Door Phone Hardware Installation
M13 Connection
•Connect video door phone to IG7600’s LAN port
directly.
•Connect video door phone to IG7600’s LAN
port via network switch.
The M13 video door phone only can be registered via IG7600’s LAN port. Please
connect M13 video door phone to IG7600’s LAN port directly or via a network switch.
IMPORTANT: Disconnect the IG7600 (and Network switch ) power when M13 video door
phone is wiring. Keep power off until the wire connection has been made.
Cat.5e Ethernet Cable
Cat.5e Ethernet Cable
Cat. 5e Ethernet cable can be used to connect M13 video door phone and IG7600.
Cat. 5e Ethernet cable resistance - less than 0.094 Ohm/m.
The maximum connection distance cannot exceed 100 meters. When the
distance exceeds 100 meters, an individual switch/hub is needed to connect
M13 video door phone and IG7600.
M13 Connecter
• 14 pin connecter with RJ45 and DC plug (Default)
• 14 pin connecter without Jack
• Twist pair definition:
• Pair1 : Pin1 & Pin 2.
• Pair2 : Pin3 & Pin 4.
• Pair3 : Pin5 & Pin 6.
• Pair4 : Pin7 & Pin 8.
Color of Wire and Identification
RJ-45 Connector & Cat 5e Ethernet Cable.
•RJ45 jack:
Wiring: CAT5e connect to 14 pin connecter of M13
Indice
Altri manuali TECOM Sistema di interfono
